MIOTTA home8 UltraShield User manual

Broadband internet connection, iOS or Android phone and home router required.
What’s inside:
UltraShield
Quickstart Guide
Model No. H1101FUS
1x RF433 Dongle
1x Power
Adapter
1x Ethernet
Cable
1x Gateway
1x External Siren 2x Infrared Motion
Sensors
1x Wi-Fi Camera
12 3
5 6
4x Arm/Disarm/
Panic Remotes
7
L-shaped
USB Adapter
10x Door + Window
Sensors
4
10x Batteries
(CR123A)
20x Double-Sided
Tapes
6x Mounting
Accessories
1 xDouble-Sided
Tape
2x Batteries
(CR123A)
2x Double-Sided
Tapes
1x Power
Adapter
Mounting
Accessories
Step 2: Set up your smartphone Step 3: Activate your system
English English
2. Download the Home8 app
from the App Store or
Google Play Store.
2. Find the QR Code Sticker
on the Gateway and follow
the instructions on your
app.
3. Follow the on-screen
instructions and set up
your account.
3. Install batteries and plug
in power adapters to
devices and sensors.
2. Connect the 1Gateway
to your router with the
included Ethernet
cable, then power on.
1. Plug in the 2RF433
Dongle to the Gateway
with the included
L-shaped USB adapter
for best reception
standing up.
1
1
2
5 4 6 7
1. Go to Wi-Fi settings and
connect your smartphone
to Wi-Fi.
Step 1: Connect to Network
Unpack all of your hardware within 20 feet of your
home router for quick set up.
V1.0
3. When you see the "System
is ready!" message.
Congratulations, your system
setup has completed!
1. Select Menu Icon on
top left on the App and tap
"Add Device" to activate
system.

English English
Step 4: Place your devices
English English
Door + Window Sensor
Use screws or Double-sided
tape to attach sensor.
Maximum distance between
two part is 1/4 inch .
Wi-Fi Camera
Connect the included power
adapter and ethernet cable
(optional) to the 3Camera.
Check the Light indicators.
The up light should be Solid
red as power on. The button
light should be blink green if
camera is within the signal
range.
Infrared Motion Sensor
Place the device in an area
with no direct sunslight.
The motion sensor has a 3
minutes cooldown period.
Use your Keychain Remote to
Arm/Disarm/Panic
Press the Arm/Disarm button.
The LED light should blink.
You will receive a push
notification on your phone
saying "System is armed/
disarmed by keychain remote"
if remote is within range.
Hold either button for 5 seconds
as trigger Panic button.
External Siren
Plug the power line.
Place the siren.
1. On the home screen,
tap the Subscribe Now.
2. Provide contact and
payment method
information.
3. Review order information
and click Place Order.
Step 5: Enable your service
Once your subscription
is successful, the system
status will change to
" Practice Mode " for one
day.
With our Professional
Monitoring Service, after
the1-Day Practice Period, the
system status will change to
" In Service ", you'll receive
24/7 monitoring for your
system.
Troubleshooting & FAQ
Please visit https://www.home8alarm.com/faq/
or call 1-844-800-6482 for more information.
120°
1/4"
1-Day Practice Period
3
4
5
6
7