Mission Hills Kingston Dining Table User manual

DINING TABLE ASSEMBLY INSTRUCTIONS
2-1
WARNING:
Adult assembly required.
Two adults recommended.
Perform all assembly steps on a flat, soft, non-abrasive
surface to avoid scratching the finish.
www.missionhillsfurniture.com
A
B
C
D
E
F
G
H
CODE PARTS QTY.
CODE HARDWARE QTY.
PARTS LIST
HARDWARE LIST
4
1
1
8
8
8
8
1
M8*50

DINING TABLE ASSEMBLY INSTRUCTIONS
2-2
1
www.missionhillsfurniture.com
Care and Cleaning
mild soap. Wipe dry.
Check for loose or worn parts periodically and tighten or
replace as necessary.
Clean unit with a damp cloth or sponge using warm water and
2
www.missionhillsfurniture.com
[e-mail]
Thank you for your purchase.
If you experience difficulties with this product, do not return to
the place of purchase.
Please contact Mission Hills Furniture, and we will replace
defective or missing parts free of charge (Continental US only).
For customer service inquires,
or to see our full range of related products, visit us at:
®
-- Place table top (A) up side down on a soft surface.
-- Install table legs (C) on table top (A) as shown.
-- Tighten all bolts with open-end wrench (H) provided.
-- Install bolt-end caps (G) on all bolts as shown.
-- Turn table over to an upright position.
-- Place glass (B) on table top.
Your table is now ready for use
E
FDG