MiTAC Cappucino User manual

MiTAC Rugged Tablet
Cappuccino
Product Guide Rev1.0

2
Revision History
Revision
1.0
New Release

3
Rugged Tablet Features
This chapter briefly describes the features of Rugged Tablet-Cappuccino which has three
products repsectively as well as purchased individually.
Cappuccino Tablet (System)
Cappuccino Docking Station (Peripheral)
Cappuccino Extension Cover (Peripheral)
Cappuccino Spare Main Battery (Others)
Summarize the major features below.
Feature Summary
T ABLE : M I TAC C APPUCCINO F EATURES
Cappuccino System- Tablet
DISPLAY
Size
11.6" TFT-LCD
Max. Resolution
1920 x 1080
Luminance (cd/m2)
300 nits
Option: 500 nits
Glass Type
Gorilla® Glass 3 and Direct Bonding
TOUCH SCREEN
Type
P-CAP
Touch
10 point capacitive multi-touchscreen supporting glove mode and rain mode
SYSTEM
Operating System
Windows 10 IoT Enterprise 2016 LTSB (Option: Linux CentOS7)
Processor
Intel® Apollo Lake Pentium N4200E (Quad-Cores) 1.1GHz with turbo frequency to
2.5GHz, 2MB L2 Cache (4 Threads)
Chipset
Intel® SoC Integrated
System RAM
LPDDR4 3733MHz 4GB (Option: 8GB)
System ROM
M.2 SSD 64GB (Option: 256GB)
Wireless
IEEE 802.11 ac/a/b/g/n (2.4GHz/5GHz)
Bluetooth
BT V4.2
LTE/GPS
GPS (UBX-G8020-KT)
Option: LTE CAT4 w/ M.2 Slot Comp. w/ regular M.2 card (Support by Request)
NFC
NFC Reader (NXP NPC300)
Barcode Scanner
Option: SW Decode: Honeywell SwiftDecoder (1D/2D Support)
Rear Camera
8MP Auto-Focus CMOS built-in module with Flash LED
Switch Key
1 x Dump Switch ; 1 x Reset Switch
Sensor
Ambient Light Sensor, Gyro Sensor & G-Sensor
Speaker
2 x 0.8W
Microphone
Yes
LED Indicator
Charging LED
Power LED
Main Battery
4.2HRs, 19.532Whr Removable lithium battery with latch lock (2570mAh, 7.6V)
Hot-Swappable Battery
Yes, 2.66Whr back-up battery (700mAh*1, 3.8V, 1S1P)

4
I/O Port
1 x USB 3.0 Type-A ; 1 x Nano-SIM (Support by Request w/LTE feature)
1 x Audio Jack ; 1 x DC Jack ; 1 x POGO Connector
Keypad
1 x Power Key
2 x Volume Key
3 x Capacitive Function Key (on front side)
Fully Rugged Feature
IP65
MIL-STD-810G 1.2M Drop and Shock & Vibration
Dimension
299 x 199 x 17.7 mm (without bumpers & hand-strap)
307.9 x 207.9 x 29.3 mm (with bumpers & hand-strap)
Weight
895g (Entry WiFi SKU)
Operating Temperature
-10°C ~ 50°C
Storage Temperature
-20°C ~ 60°C
Storage Humidity
10% ~ 90% @40°C non-condensing
Security
HW TPM 2.0 FIPS 140-2 Level 2 Compliance
Certification
CE/FCC/VCCI
Hand-strap
Yes
Shoulder-strap
Yes
Power Adapter
AC to DC, DC 19V 65W Adaptor
Cappuccino Peripheral- Docking Station
DOCKING STATION
Key Features
Desktop Cradle with Power Charging.
Battery Charging Bay and I/O Expansion
I/O
1 x Powered 24V USB
1 x USB 3.0 Type-A
2 x USB 2.0 Type-A
1 x HDMI 1.3
1 x Powered 5V/12V Serial Port
1 x Giga LAN
1 x Battery Charging Slot
1 x DC Jack
Power Adapter
AC to DC, DC 24V 180W Adapter
Cappuccino Peripheral- Extension Cover
EXTENSION COVER
Key Features
Vehicle Mounting VESA mount support 75 mm x 75mm
Power Charging and I/O Expansion
Clip-Fix Design for Pick-up Tablet by Tool-Less
I/O
1 x Powered 24V USB
1 x USB 3.0 Type-A
1 x HDMI 1.3
1 x Powered 5V/12V Serial Port
1 x Giga LAN
(Optional) 3 x SMA ( 2 x LTE and 1 x GPS) for RF Antenna Path
(Optional) 1 x Nano-SIM (support by request)
1 x DC Jack
Power Adapter
AC to DC, DC 24V 180W Adapter
Cappuccino Others- Spare Main Battery
Spare Main Battery
Key Features
4.2HRs, 19.532Whr Removable lithium battery with latch lock (2570mAh, 7.6V)

5
Cappuccino Dimension and I/O Placement
Figure shows the dimension and I/O placement of Tablet, Docking Station and Extension
Cover.
Figure1:MiTAC Cappuccino Tablet Dimension

6

7
Figure2: MiTAC Cappuccino Docking Station Dimension (without Cable Cover)
Figure3: MiTAC Cappuccino Docking Station Dimension (with Cable Cover)

8
Figure4: MiTAC Cappuccino Extension Cover Dimension
Figure5: MiTAC Cappuccino Tablet Placement

9
Figure6: MiTAC Cappuccino Docking Station Placement (without Cable Cover)
Figure7: MiTAC Cappuccino Docking Station Placement (with Cable Cover)

10
Figure8: MiTAC Cappuccino Extension Cover Placement

11
Quick Start Guide
This chapter briefly describes the how to install Shoulder-strap and Cable Cover along with
Docking Station as well as Capacitive Function Key on front panel side.
Shoulder-strap Quick Installation Guide
Shoulder-strap installation SOP as follows:
Step1: Place Shoulder-strap this way in front of you on the desk
Step2: Loose strap from buckle

12
Step3: Make strap go through the hole of Rear Cover and tighten well
Step4: Repeat same way as Step2 and Step3 on the other side (as following circle)
Step4: Complete

13
Cable Cover Quick Installation Guide
Cable Cover installation SOP as follows:
Step1: Place Docking Station this way in front of you on the desk
Step2: Put down the front side of Docking Station on the desk

14
Step3: Assemble Cable Cover
Step4: Assemble Bottom Plate
Step5: Screw on Bottom Plate with 4 screws

15
Capacitive Function Key
Default key function in F1, F2 and F3 are:
F1: Rotation Lock
F2: Power Key
F3: Windows Home Key
However, any other requirements of usage would be considered as “support by request” from
customized BIOS.
Please refer usage list as below Table1-1, Table1-2 and Table1-3 for detail.
Table1-1: Capacitive Function Key Usage List

16
Table1-2: Capacitive Function Key Usage List

17
Table1-3: Capacitive Function Key Usage List

18
Managing System Power
This chapter briefly describes the guideline on external power supply, battery pack as well as
Safety Notice.
AC Adapter
Two AC adapters are designed for use with Tablet and Docking Station respectively.
Tablet: 19V/65W
Docking Station: 24V/180W
Connecting the AC adapter to another device could damage the adapter.
The AC power cord supplied with Tablet is for use in the country where you purchased it. If you
plan to go overseas with Tablet, consulting your dealer for corresponding power cord may be
necessary.
When you disconnect the AC adapter, disconnect from the electrical outlet first and then from
the Tablet. A reverse operation may damage the adapter or Tablet.
When unplugging the connector, always hold the plug head. Pulling on the cord would be
prohibited.
The AC adapter serves as a converter from AC(Alternating Current) to DC(Direct Current) power as
your Tablet runs on DC power. However, an electrical outlet usually provides AC power. Not only this
but also charging the battery pack while connecting to AC power.
The adapter operates on the voltage range of 100 to 240V AC.

19
Battery Pack
The battery pack is hot-swappable design as well as the internal power source for Tablet. It
is rechargeable by using the AC adapter.
Charging the battery pack
Charging will not be started if battery pack’s temperature is out of allowed range which
is between 0°C(32°F) and 45°C(113°F). Once the temperature meets the requirements,
charging automatically resumes.
At the period of charging, please do not disconnect the AC adapter prior to fully-charge
of battery, otherwise you will get a prematurely charged battery.
The battery has a high temperature protection mechanism which limits the maximum
charge of the battery to 70% of total capacity in the event of high temperature
conditions. Under this circumstances, the battery will be considered as fully charged at
70% capacity.
The battery level may automatically be reduced due to self-charge even when the
battery pack is fully-charged(100%). Please be cautious that it happens no matter
whether the battery pack is installed in the Tablet.
To charge the battery pack, connect the AC adapter to the Tablet and an electrical outlet.
The battery indicator on front panel side shows amber to indicate charging status. Users will be
suggested to remain Tablet power off while charging. Once battery is fully-charged, the battery
indicator will be green.
It is expected approximately 3 hours to fully charge the battery pack when the power is OFF
while approximately 3.5 hours when the power is ON (may need a longer charging time at lower
temperature)
Note: Please do not immediately disconnect and reconnect the AC adapter to charge it again after
Cappuccino Tablet has been fully charged. Such behavior may damage the battery pack.
Initializing the Battery Pack
Users need to initialize a new battery pack before using it at the 1st time or when the actual
operating time of the battery pack is much less than expected. Initializing would be the prcoess of
fully charging, discharging, and then charging. It may take several hours to be completed.
Note: All battery pack on tablet system would be default as shutdown mode and AC-ON would be
necessary to initialize the battery pack when first out of box. (Users need to plug AC adapter
charging to wake up system)

20
Battery Pack Guidelines
When it is nearly discharged, users need to recharge the battery pack. While recharging,
make sure the battery pack is fully charged. By this, it could avoid battery pack damaged.
The battery pack is a consumable product and it will shorten battery life by doing so:
-Charging the battery pack frequently
-Using, charging or storing the battery pack in high temperature condition
To avoid hastening the deterioration of the battery pack thereby prolonging its life time,
minimize the number of times you perform battery charging.
Charge the battery pack between 10°C(50°F) and 30°C(86°F) temperature range. A higher
environment temperature will lead to battery packs’ temperature raising-up.
Avoid charging the battery pack inside a small space and in hot weather condition. Above
all, charging will not be initialized if the battery pack is not within the allowed temperature
range.
It would be recommended that users do not charge the battery pack more than once a day.
It is recommended that user charge the battery pack with the tablet’s power-off.
To maintain the battery pack’s operating efficiency, store it in a cool place removed from the
tablet system and with 30 % ~ 40 % charge remaining.
When installing or removing the battery pack, please take notes of the following:
-Avoid installing or removing the battery pack when the tablet system is in Sleep Mode.
Abruptly removing the battery pack may cause loss of data or the tablet system may get
unstable.
-Avoid touching the battery pack terminals or damage may occur, thereby causing
improper operation to it or the tablet system.
The tablet system’s input voltage and ambient temperature will directly affect the battery
pack’s charge and discharge time:
-Charging time will be prolonged when the tablet system is power-on. To shorten the
charging time, it is recommended that users place the tablet system in Sleep or
Hibernation mode.
-A low temperature will prolong the charging time as well as hasten the discharge time.
When using battery power in an extremely low temperature environment, users may
experience shortened operating time and incorrect battery level reading. This phenomenon
comes from the chemical characteristics of batteries. The appropriate operating
temperature for the battery is 0°C(32°F) and 45°C(113°F).
Please do not leave the battery pack in storage for more than two months without
recharging it.