Mitsubishi LANCER 2014 SERIES User guide

Owner’s Handbook
(5/13)
www.mitsubishicars.com
2014 LANCER SERIES
2014 LANCER SERIES
Dieline -DO NOT PRINT!

PLEASE PLACE COPIES OF THE FOLLOWING ITEMS IN THE POCKET BELOW:
1. Pre-Delivery Inspection Form (Customer Copy)
2. Triple Diamond Delivery Checklist (Customer Copy)
3. Salesperson or Key Dealership Contact’s Business Card
Owner’s Handbook
(5/13)
www.mitsubishicars.com
2014 LANCER SERIES
2014 LANCER SERIES
Dieline -DO NOT PRINT!

1
Thank you for buying a Mitsubishi Lancer. There’s no doubt you’ve already realized how well
your car drives on the open road. What you may not know is all the great features that help
your car perform the way it does. In the pages ahead we’re going to run through the basics
and prepare you for the road.
We’d also love to hear from you about your overall Mitsubishi experience. If you haven’t
already, please log on to www.MitsubishiSSIsurvey.com and tell us how we did. This will help
us make sure your next visit is that much better.
We hope you will visit the Mitsubishi Owner’s site where we store the latest Mitsubishi news
and special offers. Here you can also keep track of your car’s warranty and servicing needs,
get Roadside Assistance Information and tap into other owner-centric details. Just log on to
www.Mitsubishicars.com/ownersonly.
Driver’s View ..................... Page 2-3
Controls ............................ Page 4-5
Own the Road................... Page 6
Technology ....................... Page 7
Audio System.................... Page 8
Display Audio System
and Navigation System
(if equipped)..................... Page 9-10
Bluetooth® (if equipped).... Page 11
FAQ’s................................ Page 12-13
Table of Contents

2
2
85
12
1
6
Driver’s View
1Side Mirror Adjustment ............... Page 2
2Headlights and Fog Lights.......... Page 4
3 Air Conditioning ......................... Page 5
4Windshield Wiper Lever.............. Page 5
5Cruise Control ........................... Page 6
6 Paddle Shifters (if equipped)...... Page 6
7Audio System............................. Page 8
8Audio Remote Control Switch
(if equipped).............................. Page 8
9 USB Port (if equipped)............... Page 8
10 Display Audio System
(if equipped).............................. Page 9
11 Navigation System
(if equipped).............................. Page 10
12 Bluetooth®Controls
(if equipped).............................. Page 11

3
5
6
4
3
7
9
(Inside glove box)
11
10

4CONTROLS
Regular Headlights Automatic Headlights
Headlights and other lights on.
Parking, tail, front and rear sidemarker lights, license plate and
instrument panel lights on.
Headlights and other lights turn on and off automatically in
accordance with outside light level.
All lights off
AUTO
OFF
Fog Lights (if equipped)
High/Low Beam Switch
Fog Lights will illuminate only when headlights are on low beam.
Turning the knob in the direction of the ON position turns on the
fog lights. Turning the knob in the direction of the OFF position
turns off the fog lights. The knob will return to the neutral
position when released.
To change the headlights from high beam to low beam and vice versa, pull
the turn signal lever fully towards you (1). An illuminated blue light in the
instrument cluster indicates when the headlights are on high beam.
• Headlightasher
 Youcanashthehighbeamsbypullingthelevergentlytowardsyou(2).

5
A- Turn for Temperature control
B- Push to select outside air (Indicator light off) or recirculated air (Indicator light on)
C- Turn to select the blower speed. To the right increases blower speed. To the left decreases
blower speed. Turned all the way to the left turns the blower off.
Note: OFF is located above AUTO.
D- Push for air conditioning ON/OFF (Indicator light on/Indicator light off).
E -Turntoselecttheairowanddirectionmode(AUTOpositionisonlyauto
type air conditioning).
F- Push to defog the rear window (Indicator light on). Rear window
defogger light automatically turns off after 20 minutes.
To defog front windshield
1. Set the Mode Dial Eto defrost position.
2. Set the blower speed Cto the maximum position.
3. Set the temperature Ato highest position.
Turn the knob Bto operate the rear
window wiper.
The wiper operates continuously
for several seconds then operates
intermittently at intervals of about 8
seconds.
Washeruidissprayed,thewiperwill
automatically operate 2 or 3 times.
Rear Window Wiper and Washer (Lancer Sportback only)
Air Conditioning (Automatic shown)
The wipers will operate once.
INT: Intermittent intervals can be
adjusted by turning the knob A
AUTO: The wipers will be operated
automatically by rain sensor
(if equipped).
Slow
Fast
Rain Sensing Wipers (if equipped)
It is possible to adjust the sensitivity of the rain sensor
by turning the AUTO ring C .
+ Higher sensitivity to rain
– Lower sensitivity to rain.
Windshield Wipers
CONTROLS
C

A - CANCEL: To deactivate the cruise control
B - ACC RES: To increase the set speed or resume
previously set cruise control operation.
C- COAST SET: To set the desired speed and to
reduce the set speed
D- ON/OFF: To turn ON/OFF cruise control
To set a cruising speed
1. Press Dand the CRUISE indicator light in the
meter cluster will be turned on.
2. Accelerate or decelerate to your desired speed
(above 25 mph). Press Cand remove your foot
from the accelerator pedal.
To accelerate or decelerate speed
Press Bto increase set cruising speed.
Press Cto decrease set cruising speed.
To cancel the cruising speed
Press Aor press brake pedal, or press D .
6OWN THE ROAD
– :SHIFT DOWN + :SHIFT UP
Paddle Shifters (if equipped)
Seat Heater Switch
Position - Action
(HI) - For quick heating
(LO) - To keep the seat warm
Drive Mode Selector (if equipped)
The drive mode can be selected by pressing the
switch while the ignition switch is in the ON
position.
2WD: This mode is for economical driving on
normal dry roads and freeways.
4WD AUTO: This mode is for all driving conditions
on various roads.
4WD LOCK: This mode is for driving in slippery
conditions such as on snow-covered roads or sand.
Cruise Control
AB
C
D
Simply upshift or downshift
with a tap of your fingers,
without moving your hands
from the steering wheel.
You can return to the automatic
shifting mode by pulling the +
(SHIFT UP) side paddle shifter
towards you and holding for
over 2 seconds.

7
TECHNOLOGY
Multi-information Meter Switch (INFO Button)
Keyless Entry System
[F.A.S.T.-Key] [Normal Key]
LOCK
Press: Once – Lock all doors
UNLOCK
Press: Once – Unlock driver door
Twice – Unlock all doors
TRUNK (except Sportback)
Press twice to open trunk lid.
PANIC
Press and hold. Press any button to
turn off panic.
To lock or unlock the doors while
carrying the F.A.S.T.-key, press the
driver’s or front passenger’s door
lock/unlock switch A .
Change display
information by pushing
the INFO button:
Warnings, Odometer/
Tripmeter, Service
Reminder, Engine Coolant
Temperature, Average
and Momentary Fuel
Consumption, Driving
Range and Average
Speed, etc.
ECO Driving
When the ECO indicator light
is on, your current driving style
supports good fuel economy.
Multi-information
meter
A
Tire Pressure Monitoring System (TPMS)
The Tire Pressure Monitoring System light illuminates when one or more
ofyourtiresissignicantlyunderinated.Pleasenotethatchangesinthe
outside temperature may decrease tire pressure causing the TPMS light to
turn on. If the TPMS light remains illuminated, check your tire pressure.
Warning light
illuminates when
tire pressure is
too low.
If warning light
illuminates, contact your
local Mitsubishi dealer.
(May be a TPMS system
issue or malfunction).

8AUDIO SYSTEM
NOTE: Please refer to Comfort Controls in your Owner’s Manual for
more detailed information on how to use your audio system.
Audio Remote
Control Switch
(if equipped)
VOLUME
UP
DOWN
SEEK
Change station
or track
MODE
Change the
audio source
C
D
B
A
To enter frequencies into the memory (AM/FM/SAT)
1. Press Ato turn on the audio system.
2. Press Bto select the desired band (AM/FM/SAT).
3. Press Cto Seek Station
4. Hold down one of the Memory select buttons D(1-6) until it
beeps in order to save that station to memory. 1. Park your vehicle in a safe place and turn the ignition to the LOCK
position.
2. Connect the cable (cable is not included with the vehicle) to the USB
memory device or the Dock connector to the iPod .
3. Open the glove box and connect the cable to the USB input
terminal .
4. Turn the ignition switch to the “ACC” position. Turn on the audio
system.
5. Press B several times to switch to the USB mode. The input mode
changes as follows:
CD
 USB  Bluetooth®(if equipped)
6. Depending on your USB device, it may take longer for playback to start.
7. Once the device is selected, playback starts.
With Display Audio System, follow steps 1 through 4 above
5. Press MENU on the touch screen.
6. Touch USB.
7. Touch <Folder> then select a track and begin playback.
USB and iPod Input (if equipped)






