Mobile Pixels DUEX Plus User manual

DUEX Plus
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –23
Čeština
24 –44
Slovenčina
45 –65
Magyar
66 –86
Deutsch
87 –107

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
󲐜󲐝󲐞󲐟󲐠www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4
Monitor & Accessories
1. Interchangeable USB Type-C ports
Back charging port and signal port
2. Menu Buttons
3. Magnetic Plates
4. Metallic Plates
5. Screen
Accessories
1. USB Type-C Cable to type A
2. USB Type-C Cable to type C
3. Magnetic Plates
4. Adhesive stickers

5
Driver installation guide
When using USB C to connect, driver installation is not necessary.
Windows installation guide
Connect Widows Laptop to Mobile Pixels Duex Plus Monitor, wait 20 secs and the
monitor should turn on. In the event the monitor does not turn on, please follow the
steps below:
1. Please download the correct windows driver from
WWW.MOBILEPICELS.US/PAGES/DOWNLOAD-DRIVERS
2. Double click and launch the installer. Click “Yes” in the window below.
3. Click “Next” in the Windows below:

6
4. Please select “I accept the terms of the license agreement” and click Next.
5. Please select “Yes, I want to restart my computer now” and click Finish.

7
Apple OS installation guide
Do not plug the Mobile Pixels Device into your mac before executing the driver
installation.
1. Please download the Mac driver from the link below. Run the “Mobile_pixels_3.3-
2021-04-19.dmg” file to load the drivers to the mac folder.
2. Click Mobile_Pixels_Graphics_Driver-3.3-221-04-19.pkg. Please follow the
instructions to install the device driver.
3. The system should pop-up a screen “System Extension Blocked” after installation
asks the user to enable these extensions for the first time. Click “Open Security
Preference” to go setting.

8
Important: This warning is not always shown. Even if it is not shown, for new
installations the user must “Allow” to install the Mobile Pixels driver and restart the
laptop.
4. (After System Reboot) Connect Mobile Pixels device to Mac computer, a screen
recording prompt should pop up “Click Open System Preferences”

9
5. Go to System Preferences > Security & Privacy > Privacy
6. Click on the “Lock” to make changes
7. Scroll and select “Screen Recording” and check “DJTVirtualDisplayAgent”
8. Click on the Lock to save changes Click “Quit Now” and restart the laptop.

10
Monitor positioning guide
Attachment mode
1. Place the magnetic plates towards the monitor side and remove the adhesive
stickers.
2. Make sure that Duex Plus is centered in the back of the laptop.
3. Open the laptop monitor.
4. Slide Duex Plus and swivel the screen.
Monitor Side
Front of the
laptop