MobileDemand ND51 User manual

User's Manual
TABLET PC
ND51

1-2
1-3
Content
Copyright Notice ......................................................................................................................1-3
Trademarks ..............................................................................................................................1-3
Revision History.......................................................................................................................1-3
FCC-B Radio Frequency Interference Statement................................................................1-4
FCC Conditions........................................................................................................................1-4
FCC RF Radiation Exposure and SAR Statements ............................................................1-5
WEEE Statement.....................................................................................................................1-6
Safety Instructions...................................................................................................................1-7
Introductions...............................................................................2-1
Unpacking.................................................................................................................................2-2
Product Overview ....................................................................................................................2-3
Open View ..........................................................................................................................2-3
Top Side View.....................................................................................................................2-5
Right Side View ..................................................................................................................2-6
Left Side View.....................................................................................................................2-8
Rear Side View...................................................................................................................2-9
Rear Side Disassembled Exploded View...................................................................... 2-11
Bottom Side View.............................................................................................................2-12
Specifications.........................................................................................................................2-13
Getting Started............................................................................3-1
Begin to Use the Tablet PC.....................................................................................................3-2
How to Manage Power Supply ...............................................................................................3-3
AC/DC Adapter...................................................................................................................3-3
Battery................................................................................................................................ 3-4
Power On ........................................................................................................................... 3-5

User's Manual
1-2
1-3
Copyright Notice
We take every care in the preparation of this document, but no guarantee is given as to the
correctness of its contents. Our products are under continual improvement and we reserve
the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.
Revision History
▶Version: 2.0
▶Date: 10, 2017

1-4
1-5
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and radiates radio frequency energy, and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
▶Reorient or relocate the receiving antenna.
▶Increase the separation between the equipment and receiver.
▶Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
▶Consult the dealer or an experienced radio TV technician for help.
NOTE
▶The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
▶Shield interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
▶This device may not cause harmful interference.
▶This device must accept any interference received, including interference that may
cause undesired operation.

User's Manual
1-4
1-5
FCC RF Radiation Exposure and SAR Statements
This device complies with Industry Canada RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fomctionnement du dispositif.
FCC/IC RF Radiation Exposure and SAR Statements SAR Statement. The tablet has
been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC/IC has
established detailed SAR requirements and has established that these requirements. RF
Exposure Information The radio module has been evaluated under FCC Bulletin OET 65C
(01-01)/RSS102 and found to be compliant to RF Exposure from radio frequency devices.
This model meets the applicable government requirements for exposure to radio frequency
waves. The highest reported SAR level for usage near the body (0mm) is 1.13 W/kg, and
for the simultaneous transmission is 1.50W/kg.
▶WiFi 5G indoor use only
▶Operations in the 5.15-5.25GHz band are restricted to indoor usage only

1-6
1-7
CE Conformity
This device is in compliance with the essential safety requirements
and other relevant provisions set out in the European Directive.
Battery Regulations
European Union: Batteries, battery packs, and accumulators should
not be disposed of as unsorted household waste. Please use the
public collection system to return, recycle, or treat them in compliance
with the local regulations.
廢電池請回收
Taiwan: For better environmental protection, waste batteries should
be collected separately for recycling or special disposal.
California, USA: The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/
perchlorate/
Safety Guideline for Using Lithium Battery
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the equipment manufacturer. Discard used batteries
according to manufacturer’s instructions.
WEEE Statement
European Union: Under the European Union ("EU") Directive on
Waste Electrical and Electronic Equipment, Directive 2002/96/EC,
which takes effect on August 13, 2005, products of "electrical and
electronic equipment" cannot be discarded as municipal waste
anymore and manufacturers of covered electronic equipment will be
obligated to take back such products at the end of their useful life.

User's Manual
1-6
1-7
Safety Instructions
Read the safety instructions carefully and thoroughly. All cautions and
warnings on the equipment or user’s manual should be noted.
Keep this equipment away from humidity and high temperature.
Lay this equipment on a stable surface before setting it up.
The openings on the enclosure are used for air convection and to
prevent the equipment from overheating. Do not cover the openings.
• Do not leave the equipment in an unconditioned environment with
a storage temperature above 60ºC (140ºF) or below -20ºC (-4ºF),
which may damage the equipment.
• This unit should be operation under maximum ambient temperature
of 50ºC (120ºF) or under 60ºC (140ºF) for light loading applications.
• Thestoragetemperatureofbatteryis-20℃ ~45℃ifthestorage
duration is within 3 month.
• Thestoragetemperatureofbatterymustbekeptas23℃ifthe
storage duration is longer than 3 month.
• The recommend battery Storage condition.
Battery capacity keep 30 ± 5%、
Humidity range keep 65 ± 20% RH
Storage Temperature:
23℃± 2℃lessthan1year / -20℃～ 45℃lessthan3months
• BatteryChargingtemperatureis10℃ ~45℃ .
• Batterydischargingtemperatureis-20℃ ~60℃ .
• The temperature of the maximum battery discharging performance
willbe25℃ .
Notice:Pleasedonotchargebatteryintemperaturebelow0℃or
Above45℃ ,itmaycausesafetyissue.

1-8
1-9
• Make sure the power voltage is within safety range and has been
adjustedproperlytothevalueof100~240Vbeforeconnectingthe
equipment to the power outlet.
• Always unplug the AC power cord before installing any add-on card
or module to the equipment.
• Always disconnect the AC power cord or uninstall the battery pack
or switch off the wall socket if the equipment would be left unused
for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do
not place anything on top of the power cord.
Always keep the strong magnetic or electrical objects away from the
tablet.
Never pour liquid into the opening that could damage the equipment
or cause an electrical shock.
If any of the following situations arises, get the equipment checked by
a service personnel:
• The power cord or plug is damaged.
• Liquid has penetrated into the equipment.
• The equipment has been exposed to moisture.
• The equipment has not worked well or you can not get it work
according to User’s Manual.
• The equipment was dropped and damaged.
• The equipment has obvious signs of breakage.
Green Product Features
• Reduced energy consumption during use and stand-by
• Limited use of substances harmful to the environment and health
• Easily dismantled and recycled
• Reduced use of natural resources by encouraging recycling
• Extended product lifetime through easy upgrades
• Reduced solid waste production through take-back policy
Environmental Policy
• The product has been designed to enable proper reuse of parts
and recycling and should not be thrown away at its end of life.
• Users should contact the local authorized point of collection for
recycling and disposing of their end-of-life products.

User's Manual
1-8
1-9

Introductions
Part No.G52-17A12X8
User's Manual
TABLET PC

Introductions
2-2
2-3
Congratulations on becoming an user of this product, the finely designed Tablet PC. You
will have a delightful and professional experience in using this exquisite Tablet PC. We are
proud to tell users that this Tablet PC is thoroughly tested and certified by our reputation
for unsurpassed dependability and customer satisfaction.
Unpacking
First, unpack the shipping carton and check all items carefully. If any item contained is
damaged or missing, please contact your local dealer immediately. Also, keep the box
and packing materials in case you need to ship the unit in the future. The package should
contain the following items:
▶Tablet PC
▶AC/DC adapter and AC power cord
▶String (optional)
▶Hand strap (optional)
▶Brief case handle (optional)
▶Stylus (optional)
▶Stylus holder (optional)
▶Quick Start Manual(optional)

User's Manual
2-2
2-3
Product Overview
This section provides the description of basic aspects of the Tablet PC. It will help you to
know more about the appearance of this tablet before using it. Please be aware that the
figures shown here are for reference only.
Open View
The figure of open view and description shown below will lead you to browse the main
operating area of your Tablet PC.

Introductions
2-4
2-5
1. Front Camera
This built-in front camera can be used for picture taking, video recording or
conferencing, and any other interactive applications.
2. Internal Microphone
This is the built-in microphone and its function is the same with microphone.
3. Touch Screen
Whenever the display is rotated, the touch screen will be rotated and expanded to fit
the display automatically.
(NOTE: This function will be changed depends on the user’s settings.)

User's Manual
2-4
2-5
Top Side View
1. Headphone Jack
Used for connecting the speakers or headphones.
2. Volume Up / Volume Down Button
Press the Volume Up or Volume Down button to adjust the sound volume.
3. Barcode scanner (optional)
Easy handheld device for tracking goods from production to loading in the warehouse
to ensure shipping and Real-time order status.
4. Power Button
Power
Power Button
• Before powering on the Tablet for the very first time, you
must connect it with AC power.
• Press and hold the power button for 4 seconds can shut
down the Tablet.

Introductions
2-6
2-7
Right Side View

User's Manual
2-6
2-7
1. Micro HDMI Port
Micro HDMI (High-Definition Multimedia Interface) technology is the industry-leading
interface and de-facto standard connecting high-definition (HD) equipment.
2. USB 2.0 Port
The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the
mouse, keyboard, modem, portable hard disk module, printer, etc.
3. DC-in Jack
It is an electrical connector for supplying direct current (DC) power.
4. Reset Hole
If the Tablet PC cannot be turned off normally or no respond by pressing the power
button for 4 seconds, insert a straightened paperclip to the hole.
(Noted: In this case, AC power must be connected before restarting the Tablet.)
5. USB 3.0 Port
USB 3.0, the SuperSpeed USB, delivers the higher interface speeds for connecting
various devices, such as storage devices, hard drives, or video cameras, and offers
more advantages over high-speed data transferring.
6. RJ-45 Connector
The Ethernet connector, with bandwidths 10/100 Mbps, is used to connect a LAN
cable for network connection.

Introductions
2-8
2-9
Left Side View
1. Kensington Lock
This tablet provides a Kensington lock hole, which allows users to secure the tablet in
place.

User's Manual
2-8
2-9
Rear Side View
The figure of open view and description shown below will lead you to browse the main
operating area of the Tablet PC.

Introductions
2-10
2-11
1. Rear Camera
This built-in rear camera can be used for picture taking, video recording or
conferencing, and any other interactive applications.
2. Battery latch
To lock/unlock battery.
3. NFC (optional)
To transfer information and files by point-to-point through two device with NFC
function.
4. Speaker
Support high quality sound.
5. Finger print (optional)
To access the tablet authority by scanning users’ fingerprint.
LTE Card Slot (optional)
To surf Internet with LTE high-speed wireless communication.

User's Manual
2-10
2-11
Rear Side Disassembled Exploded View
The figure of dismantling view will lead you to browse the Tablet PC.