12
To begin assembly, connect wooden poles (B) and (C) together with
the plastic tube (A) as shown. Repeat until all four poles are
assembled.
Insert four complete poles, one at a time, into the side channels on the
inside of the teepee canvas. Ensure the wooden poles (B) with hole are
at the top. Slide each pole right to the base of the canvas channel.
A
x4
1
C
x4
A
B
C
C
.
34
Attach wood poles and teepee canvas together using the cotton string
(D). Lie the teepee flat and bunch the ends together. Thread the string
through the eyelets in the canvas and then through the pole, alternating
each time (keeping all poles bunched together).
All done! Ensure all teepee poles are fully extended and the fabric in
each section is taught. The fabric should not sag between poles if all
poles are fully extended. Enjoy!
x1
Knot
D
1
D
x1
Piccolo Teepee
3
mocka.co.nz | mocka.com.au
Assembly Instructions
