MODE HS08-6 Series User manual

INSTRUCTION MANUAL
MINI AIR COMPRESSOR HS08-6 SERIES
( Note: Pictures for reference, PLS make the object as standard )
Thanks for purchasing our HS08-6 series mini air compressor,
please read this Instruction Manual carefully and thoroughly
before operating the air compressor to receive optimum
results.


2
Features：
1. Suitable for airbrush Dia 0.2~0.5mm.
2. especially perfect for make up cosmetic, nail art, airbrush tattoo,
airbrush hobby and so on；
3. It can start with pressure, and continuous work；
4. Has auto start and auto stop function.
5. Electronic adjust pressure, LED light show different pressure gear,
to meet with different needs.
6. One button operation, easy to use.
7. Airbrush holder can be free installation,demolition, which
is is flexible and applied.
8. Fully function, beautiful shape fashion ,lug around easily.
Specification:
Air compressor:
MOTOR: DC 12V
AMP: 1.6A
Air flow: 10.5L/min
Working pressure: 2~15psi
Auto stop: 21psi Auto
start: 15psi
AC transformer:
Input AC100~240V50/60HZ 0.6A
Output DC 12V 1.6A


3
Operation Direction:
1. When in AC air compressor working situation, please put AC
transformer plug into compressor power jack, and connect with
AC power at the same time.
2. Press the white power on/off switch, the compressor start working.
Then press the same button for a short second continuously, it will
cause the working pressure change, with the green working light
changes, the so called working pressure adjustable. And please
turn off the compressor when stop use (By pressing the white
switch for three second).
3. There is an electric shock hazard if connect the power plug in a
wrong way.
4. The compressor has internal hot protection device, the compressor
will auto cut off the power when over heat, and reset after the
motor cool down.
5. Put the airbrush back to the airbrush holder, to prevent the airbrush
drop or the ink dump out.
6. PLS use the airbrush compressor in a right way, don’t touch the
machine by wet hands.
7. After using, PLS clean the airbrush.and pull up the AC adapter
immediately, put it in a dry place.
8. Automatics unable to keep pressure for long time, in order to
extend the servicelife , PLS turn off the compressor when stop
working


4
Safety Requirement for User:
1. To prevent health damage, never use at high temperature, wet
location!
2. The product must used in dry, indoor locations. Do not spray
noxious, flammable, explosive material.
3. PLS operate the machine as manual, Improper use will damage to
equipment or harm consumers.
4. If there is something unusual happens, please disconnect the
device and power supply immediately.
5. If any accessory is damaged, please take it to wholesaler or
professional repair shop, do not try to repair by oneself.
6. Please keep the product in clean, dry and do not expose the
product or its accessories in the sun or to the temperatures high
than 35℃.
7. The product is not a toy and must be kept out of the reach of
children. There is an electric shock hazard if connect the power
plug in a wrong way


5
Description:


6
Spare Part List:


7
PARTS.
NO. DESCRIPTION QTY PARTS. NO. DESCRIPTION QTY
#01
ON/OFF POWER
AND PRESSURE
SWITCH BUTTON
1 #17 CYLINDER HEAD 1
#02 BUTTON CUSHION 1 #18 VALVE 1
#03 PLASTIC
FASTENER 1 #19 ORING 1
#04 CIRCUIT BOARD 1 #20 CYLINDER
BLOCK 1
#05 M4*8 SCREW *1 1 #21 CYLINDER
BRACKET BOX 1
#06 AIR OUTLET
DAMPER 1 #22 M3*5 SCREW 4
#07 WIRE SOCKET 1 #23 COVER BOARD 1
#08 AIRBRUSH
HOLDER BOX 1 #24 M3*5 SCREW 2
#09 PRESSURE SWITCH
ASSEMBLY 1 #25 MOTOR 1
#10 FRONT COVER 1 #26 HOSE 2
#11 M3*20 SCREW 4 #27 SIDE PLATE 1
#12 M3*20 SCREW 1 #28 BACK COVER 1
#13 PRESS PLATE 1 #29
VIBRATION
ATTENUATION
FEET
8
#14 COMPRESSOR
RING 1 #30 RUBBER FEET 4
#15 CONNECTING ROD 1 #31 COUNTER
WEIGHT 1
#16 689 BEARING 1
(Note: Pictures for reference, PLS make the object as standard.)