Modecom MC-419 MIMO User manual

U
s
e
r
M
a
n
u
a
l
W
I
R
E
L
E
S
S
R
O
U
T
E
R
MODE COM
WIRELESS ROUTER
MC-419 MIMO

www.modecom.eu
2
TABLE OF CONTENTS
1. WARNING 3
2. PACKAGE CONTENTS 4
3. SPECIFICATION 4
4. INSTALLATION 6
4.1 Before Installation 6
4.2 Installation 6
4.3 Sketch Map 7
5. LOCAL COMPUTER SETUP 8
5.1 Windows 2000 SETUP 8
5.2 Windows XP SETUP 12
6. ROUTERSETUP 16
6.1 Start Internet Explore to Login 16
6.2 PPPoE Conguration 17
6.3 Dynamic IP(Cable Modem...) Conguration 21
6.4 Static IP Conguration 24
6.5 Status 26
6.5.1 WAN Status 26
6.5.2 Wireless Status 27
6.5.3 LAN Status 28
6.6 Basic Setup 29
6.6.1WAN Setup 29
6.6.2 Wireless Setup 29
6.6.3 LAN Setup 31
6.6.4 Link Setup / Info 33
6.6.5 Routing Table 34
6.7 System 35
6.7.1 Password 35
6.7.2 Firmware Upgrade 36
6.7.3 Log 38
6.7.4 Others Conguration 39
6.8 QoS 41
6.8.1Basic Conguration 41
6.8.2 IP QoS 42
6.8.3 Application Programme QoS 43
6.8.4 Ports QoS 44
6.9 NAT 45
6.9.1Application 45
6.9.2 Virtual Server 47
6.9.3 Port Forwarding 49
6.9.4 Port Trigger 50
6.9.5 NAT ON/OFF 51
6.10 Advance Conguration 51
6.10.1 Firewall 51
6.10.2 DDNS 53
6.10.3 Remote Wake-up 54
6.10.4 URL Filtering 55
6.10.5 Remote Management 56
6.10.6 Time Management 57
6.10.7 VPN 58

www.modecom.eu
3
MC-419 MIMO
User Manual
MODE COM WIRELESS ROUTER
Copyright©2006 Mode Com Ltd. All rights reserved. The Mode Com logo is registered trademark of Mode Com Ltd.
Great thanks for your purchasing MC-419 MIMO Wireless Router.
MC-419 MIMO 54M WLAN Broadband Router is integrated with Wire and Wireless LAN connection together,
which is ideal for small business, oce and home oce. Complies with IEEE802.11g and thanks to making use
of MIMO technology provides excellent wireless coverage as well as improved connection speeds. The MC-
419 MIMO provides multi security protection. Complying with 64/128/152-bit WEP Encryption and WPA, the
MC-419 MIMO has super-safety data communication ability. With the strong rewall, the MC-419 MIMO featu-
res eective security to protect the wireless network from intruders. With build-in 4-port switch, the MC-419
MIMO allows multi PCs to share the Internet in the company, oce or home. The MC-419 MIMO also supports
many advanced functions such as time schedule, dial-on-demand, access control, virus auto-isolation, UpnP
and System Security Log. High-Performance and Easy-Conguration of MC-419 MIMO let every user easily
setup the router and enjoy the high-speed Internet connection.
This manual is the user’s guide for MC-419 MIMO. This manual consists of hardware specication, installation
guide, conguration guide and denition on how to use MC-419 MIMO. Please use this
manual for your reference.
First, please read the installation guide in chapter 4, note some points when install. Second, please read
chapter 6, in order to allow MC-419 MIMO to run in corresponding Internet environment.
For You we create products unique in every aspect…
Choose better future, choose Mode Com!
1. Warning
1. Please used adaptor provided by manufacturer, otherwise will break MC-419 MIMO.
2. Do not drop Router down or any damage to the Router and its electronic component.
3. Do not disassemble Router, otherwise warranty for repair will not be guaranteed
4. Do not exposure Router under Sunshine, to avoid heat.
5. Please keep Router dry and away from re.
6. Please keep Router under shield and run under 0-40 to the perfect state.
Copyright©2006 Mode Com Ltd. All rights reserved. The Mode Com logo is registered trademark of Mode Com Ltd.

www.modecom.eu
4
2. PACKAGE CONTENTS
Package contents of Wireless Router as follows:
1. Wireless Router MC-419 MIMO
2. Switch DC Power Adapter (7.5V,1.5A)
3. Ethernet Cable
4. User’s Guide
3.SPECIFICATION
This Wireless Router is a highly integrated Wireless Router with many functions such as Gateway, Switch, DHCP
server, Firewall etc:
11G 54Mbps Support 802.11g high-speed data rate up to 54Mbps for 802.11g(draft) and 11Mbps for 802.11b
with wide range coverage.
Network Address Transform (NAT) With providing Internet application this Router can allow more than one
user to connect with Internet at the same time by sharing one public IP address; It supports many connection
waysxDSLCable ModemLAN/ Leased Line and so on.
4 Ports 10/100M Switch It has 4 Network 10/100M switch ports port support MDI/MDIX automatic identica-
tion function, Switch port can connect to other switches, so that can support over hundred computers to go
to Internet at the same time.
PPPoE(ADSL) Automatic Disconnection/Connection Users can optionally choose automatic disconnection
in idle time and connection in access time to save Internet access cost.
DHCP Server Supported All of the networked computers can retrieve TCP/IP settings automatically from this
product.
Static IP address Binding: Authorize user to manage and congure PC in LAN in most by binding MAC ad-
dress and IP address together.
System Memorandum: MC-419 MIMO record routing history and forwarder to administrator mailbox.
UPnP: Defaulted UPnP enable user to congure networking hardware and software.
Management Based on Web Page Both network conguration and system conguration are based on inside
Web Server. The user interface is clear and usage is easy. By this interface users can also update software to en-
hance the system stability and expansibility.
Internet Access Control Dierent administration can be setup for dierent users.
Data Package Filtration: Port Filtration, IP Address Filtration, MAC Address ltration, Key word Filtration enable
user to congure IP router to analyze data package can be forwarded or refused.

www.modecom.eu
5
Virtual Server Allow other users from Internet access WWW, FTP server or other servers in LAN.
QoS: Control the IP Router bandwidth forwarding and transferring by conguration IP Address QoS , applica-
tion QoS and port QoS.
Firewall Users can randomly refuse or allow data from Internet
Scheduler: Manage and control Local Network accessing Internet by conguration time.
DMZ Server Allow one computer to be totally open to Internet to make sure special application.
Remote Management Users can totally manage oce or home network wherever they are.
DDNS By this function users can set up their own web station.
Remote Wake-up: Enable user to remote wake up PCs in LAN.
Support VPN Pass-through Supports VPN Pass-through PPTP dialogue and also supports users to congure
VPN Server and Client in LAN.
VPN server: Allow you to setup VPN server, allow 5 VPN client logging at same time Detailed Specication
ITEM
WIRELESS ROUTER MC-419 MIMO
SPECIFICATION
Standard
IEEE 802.11G, IEEE 802.11B, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Protocol
TCP/IP, NAT, DHCP, UDP, FTP, PPPoE, PPTP, L2TP,HTTP,DNS, IPSec/VPN Pass-through…
External Port
WAN
One 10/100Mbps RJ-45 port, automatic sense cross cable
LAN
Four 10/100Mbps speed Ethernet switch port, auto sense cross cable
Wireless
Parameter
Frequency
Range
2400-2483.5MHz
Forward Speed
1, 2, 5.5, 11Mbps(802.11b)
6, 9, 12, 18, 24, 36, 48, 54 Mbps (802.11g)
Opt. Channel
13
Data
Modulation
CCK, DQPSK, DBPSK, OFDM
RF Power
16-18dBm
Antenna Type
3*2dbi/2.4Ghz
Cable
UTP100Base-TX UTP/STP 5 or above standard
Control interface
Based on Web application
Inside function
10/100Mbps switch; LAN/WAN port auto sense cross cable; WAN port static/dynamic IP fl exible
setting up; Support 64/128 bit WEP and MAC; Support AP client Bridge-Point-to Point mode;
Support client mode; PPPoE dial-up and connection time setting up; PPPoE dial-up and automatic/
manual connection; Double IP Confi guration; Support VPN Pass-through; DHCP Service; DNS
relaying; DMZ Server; Static IP Address Binding; System Memorandum forwarding; IP Router
confi guration back-up; UPNP; Connection setting up and stat.; Time control on access to internet;
Firewall; NAT ON/OFF; Port/IP/MAC/Key word Filtration; Remote control; Remote Wake-up; DDNS;
Gateway; Virtual Server; Qos & VPN Server
Product
Specifi cation
CPU
KENDIN KS8695PX (ARM9)
FLASH
2MB Flash
Memory
16MB SDRAM
LAN connection
Static or dynamic IP address
WAN connection
xDSL, Cable Modem, Special cable, LAN
Power supply
DC 7.5V 1.5A Linear Type Adapter
Size
179mm×*119mm×*39mm
Temperature
0 ~ 600
Humidity
10 ~ 85%

www.modecom.eu
6
Compatible OS
Windows 95/98/ME/NT/2000/XP
Mac OS Linux or other UNIX system
Notes:
If the specication and functions of Router have been changed, it will not be informed. The users please
take care of it by themselves.
4.INSTALLATION
4.1 BEFORE INSTALLATION
4.1.1. Firstly please conrm your computer OS (Windows 95,98,NT, ME, 2000, XP, Linux, Mac) and Web browser
(Internet Explorer 4.0 with JavaScript function Netscape Navigator 4.0 or above version)
4.1.2. Make sure there is LAN Card which has been correctly installed in your computer.
4.1.3. If you are xDSL user, please remember your user ID and password.
4.1.4. If you connect Internet by LAN or WAN, please get the following information from your network admin-
istrator: IP address is static or dynamic, DNS, default gateway, account and so on.
If your computer has installed ADSL PPPoE dial-up software before the installation of Router, please backup
your installation software and uninstall your ADSL PPPoE dial-up software by Start->control panel->Add or
Remove Programs.
4.2 INSTALLATION
4.2.1. Setup WAN connection: connect broadband cable (xDSL, Cable Modem or LAN/ Leased cable) with WAN
port of Router.
4.2.2. Setup LAN connection: connect your computer LAN card’s port or your switch UPLINK port with one LAN
port of Router by a common network cable.
Note: All LAN ports of Router can automatically sense cross cable, so you can either use through cable or cross
cable to connect LAN card or switch.
4.2.3. Turn on the power: connect and the power supply, turn on it. Then Router comes to self-detect state.
During the self-detect: PWR LED will be long light, RUN LED will slow ash after correct startup, other four LAN
LED and WAN LED will ash only twice rapidly, then the system will come to normal work state.
4.2.4. Start computer

www.modecom.eu
7
LED
Description
Explanation
PWR
Power LED
Long light
RUN
System status LED
LED fl ash when device work normally.
LED doesn’t on or fl ash refer some problem with device
WLAN
WLAN port connection LED
Flashing refers to data transformation
WAN
WAN port connection LED
Flashing refers to data transformation
LAN
LAN port connection LED
Flashing refers to data transformation
Port explanation
Antenna Antenna provide wireless LAN functionality and ensure optimal signal strength
Power jack Connect power adapter (7.5V/1.5A)
Reset
Press Reset button. Switch the power off/on. After switching the power on, about 5 seconds later RUN LED
will fl ash rapidly, then release the button. After Router startup, all confi gurations will restore to default
confi guration.
WAN Connect xDSL/Cable Modem or Special cable
LAN 1~4 Connect personal computer or hub, switch and so on
4.3 NETWORK SKETCH MAP
NOTE: After switch or hub expand, Wireless Router can connect at most 253 client computers in LAN or WLAN.
WLAN
PWR
RUN
WAN
LAN 1~4

www.modecom.eu
8
Note: During the usage, the sequence of turn on is rstly turn on Modem’s power supply 1 minute after
Modem startup turn on Router power supply , then turn on the computer .
5. LOCAL COMPUTER SETUP
Users should congure local network to access Internet by Router. Users should know the default congura-
tion of Router before installation. Users must connect with Router again after congure computer’s local ne-
twork. Please make sure your computer setting is as follows, Otherwise Router can not be correctly connected
(Linux and Mac users please setup as follows by relative conference).
The default conguration of Router is:
— IP address 192.168.0.1
— Subnet Masks 255.255.255.0
Users can setup static or dynamic IP conguration.
5.1 Windows 2000 SETUP
(1) Install Router.
(2) Start Windows 2000 and check LAN LED is on or o. If o, please conrm the connection of your computer
with Router.
(3) Click “start”->“Setting”->“Panel Control”.

www.modecom.eu
9
(4) Double click the “Network and Dial-up Connection” in “control panel”.
(5) Click “Local area connection”->“Properties”->“Internet protocol (TCP/IP) ”and “Properties”.

www.modecom.eu
10
(6) Click “General ” bar, Select “Obtain an IP address automatically” and “Obtain DNS server address au-
tomatically”
(7) Click “OK”.
(8) Click ”Start” ->“Run”.
(9) Input ”cmd” ,then click “OK”.
(10) Input “ipcong” in Pop-up Command window.
(11) Please make sure your IP is the same with below. If same then your conguration is successful, or please
redo the above steps and restart your computer.
The IP address is between 192.168.0.2 and 192.168.0.254
The subnet mask is 255.255.255.0
The default gateway is 192.168.0.1

www.modecom.eu
11
(10) Input “ping 192.168.0.1”, then “Enter”.
(11) If you can see “Reply from 192.168.0.1: bytes=32 time=2ms TTL=64”then the connection between
your computer and Router is completed.

www.modecom.eu
12
5.2 Windows XP SETUP
(1) Install Router.
(2) Start Windows XP and check LAN LED is on or o. If o, please conrm the connection of your computer
with Router.
(3) Click “Start”->“Setting”->“Panel Control”
(4) Double click the “Network and Internet Connections” in “control panel”.
(5) Click “Network connection”->“local area connection”->“properties”->“Internet protocol TCP/IP” and
“Properties”.
(6) Click “General “, Select “Obtain an IP address automatically” and “Obtain DNS server address auto-
matically”
(7) Click “OK”

www.modecom.eu
13

www.modecom.eu
14

www.modecom.eu
15
(8) Click “Start”->“Run”
(9) Input “cmd “, Click “OK”
(10) Input “ipcong” in the pop-up command window.
(11) Please make sure your IP is the same with below. If same then your conguration is successful, or please
redo the above steps and restart your computer.
The IP address is between 192.168.0.2 and 192.168.0.254
The subnet mask is 255.255.255.0
The default gateway is 192.168.0.1

www.modecom.eu
16
(12) Input “ping 192.168.0.1”, then “Enter”.
(13) If you can see “Reply from 192.168.0.1: bytes=32 time=2ms TTL=64” then the connection between
your computer and IP router is completed.
6. MC-419 MIMO ROUTER SETUP
6.1 START INTERNET EXPLORRE TO LOGIN
Run Internet Explorer ( ) and click the “Stop ( ) button in Internet Explorer’s toolbar.
Input http://192.168.0.1 in Internet Explorer’s address bar.
192.168.0.1 is Default IP address of Router.
You may see the following login web page. Click “Login” button and make relative conguration. Check “WAN

www.modecom.eu
17
Setup” to Setup Wizard. The setup wizard enables you to congure the router quickly and conveniently. Check
“WLAN Setup” to WLAN setup wizard. The wireless setup wizard enables you to congure the wireless setting.
You can login directly without account & password conrmation because there is no account information re-
quired by factory default conguration.
Conn. Type: ROUTER current connection type, Dynamic IP is default value.
Conn. Status: Router current connection Status
WAN IP: ROUTER WAN current IP address
Connected PC: IP address of the computer which connects to ROUTER.
6.2 PPPoE(ADSL) USER SETUP
This connection way is suitable for virtual dial-up Internet connection.
Open external ADSL Modem and check the WAN LED of ROUTER.
If WAN LED is o, check the network cable between external modem and WAN port.
Click “Basic setup“-> “WAN setup”, as follows:
Select “PPPoE User (ADSL)” radio button.
Key in the “User ID” and “Password” provided by your Internet service provider.

www.modecom.eu
18
Click the “Apply” button.
You may see the popup window.
In case “Conn. Status” is “Successfully connected”, the conguration is correct.
Click “Show Internet connection status” and see the 6.5.1.
If In case “Conn. Status” is “Invalid ID/password”, the conguration is incorrect.
Click the “close” button and check your ID& password.
If “Conn. Status” keeps unchanged, check whether your service type is correct.

www.modecom.eu
19
Conrm the WAN connection status: If WAN connection is successfully established, then by clicking “Show
Internet Information” you can enter WAN status web page; or click “Status”-> “WAN status”, as the following.
Connection Type should be PPPoE (ADSL)
Connection Status should be “successfully connected”
Physical Address is shows Router WAN port MAC Address.
WAN IP Address, Subnet mask, Default Gateway, Primary DNS server and Secondary DNS server can be
dierent from the following values. (These addresses are provided by your ISP)
“Disconnect” is manual disconnection button. If you click then the system will disconnect with Internet
“Connect” is manual connection button. By clicking it the system can be connected to Internet again.
Click “Save” to save current conguration.
Restart all PCs connect with IP Router.

www.modecom.eu
20
Notes: Please save Router Conguration after completion, otherwise conguration will lose when
power o or restart.
Other Congurations:
MTU: Input MTU value of data package, default value is 1454. Normally please do not change it.
Disconnect PPP session if idle time is longer than Min: If you choose this option and setup the time T, then
the router automatically disconnects from Internet after T idle time.
Connect On Demand: Router can automatically connect with Internet if there is Internet access after discon-
nection. Note: during usage if there is disconnection due to external causes, then the Router will try to connect
with Internet at once until successful connection. This function is the Router inner function and does nothing
with Connect On Demand function. Connect On Demand is only eective to Disconnect PPP session if idle
time is longer than Min.
Connect Manually: By this option users have to connect with Internet manually after disconnection. This
option is only eective to Disconnect PPP session if idle time is longer than Min.
Prevent reconnection although no response from PPP server: This option is to shut o Router inner auto-
matic connection function. By choosing this option if external network disconnects, Router will not try to con-
nect at once.