INTRODUCTION
Safety instrucons
Danger symbol
Warning symbol
Reminder to the user about high
voltage
A reminder to the user to perform all
acons in accordance with the
instrucons.
damage to the device. If necessary, contact a
qualified professional.
* Do not use abrasive materials and organic
compounds (alcohol, gasoline, etc.) when
cleaning the device.A small amount of neutral
detergent is allowed to clean the device body,
and use a dry so cloth or special wipes
designed for LCD monitors to clean the screen.
* Disconnect the device from the power supply
and from the TV antenna cable if you do not
intend to use it for a long me, or before a
thunderstorm. Do not touch the device, power
cord, or antenna cable during a thunderstorm!
• Remove the baeries from the remote control
if you do not intend to use it for a long me.
* It is recommended to watch TV shows when
the TV volume control is not more than 1/2 of
the maximum level. Prolonged listening at a
higher volume level can lead to hearing loss, and
at the maximum-to the failure of the speaker.
• If the image on the TV screen remains
staonary for a long me, then residual images
may appear on the matrix, the so-called "stac
image effect".
• Using a TV involves viewing an ever-changing
image that takes up the enre screen area.
All illustraons given in this manual are
schemac representaons of objects and may
differ from their actual appearance.
CERTIFICATION INFORMATION
WARNINGS:
• Please read this manual carefully before using the
device. Save it for future reference.
• Never open the device and the external power
supply yourself, as this may cause electric shock, cause
the device to fail, and void the manufacturer's
warranty. For repairs and maintenance, contact only
qualified personnel.
• To power the device, use an electrical network with
proper characteriscs.
* Connect the device only to the audio and video
components intended for this purpose and the
connecng cables intended for this purpose.
* Do not expose the device to direct sunlight, low and
high temperatures, or high humidity. Avoid sudden
changes in temperature and humidity. When moving
the device from a cool room to a warm one and vice
versa, unpack the device before using it and wait for 1-
2 hours without turning it on.
• Do not place any foreign objects on the device.
Protect the device from bumps, falls, vibraons, and
other mechanical impacts. Remember- the screen of
the device is fragile and can be damaged even by a
slight effort.
* Do not cover the venlaon openings on the back of
the device and do not install it in places where normal
cooling of the device during operaon is not possible.
We recommend that you leave at least 10 cm of free
space around the device for beer venlaon.
* Install the device only on a hard, flat surface, and use
the stand and the set of fasteners included in the
package. When installing on a rotang base or bracket,
make sure that the power cable is not stretched and
remains free for access in case you need to quickly
disconnect the power cable from the power supply.
The plug must remain easily accessible in case of a
quick disconnecon from the power supply.
• When mounng the device on the wall, use only
special fasteners and brackets, taking into account the
weight and size of the device, to avoid injury and
2
