Modena TV 3213 LAX User manual

User Manual
TV 3213 LAX
TV 4320 LAX

CONTENT
INTRODUCTION
Manual safety.......................................................................................................................................
GENERAL INFORMATION
Device overview ............................................................................................................................. ......
Features..................................................................................................................................................
Package contents ..................................................................................................................................
Installaon ...........................................................................………………………………………………………………
General view of control panelmessages.................................................................................................
Funcon remote control...........................................................................................................
Installing baeries in the remote control wow.....................................................................................
Using the remote control ......................................................................................................................
FUNCTIONAL FEATURES
Use the provided menu ........................................................................................................................
Channel ..................................................................................................................... ............................
Seng up satellite parameters..........................………………………………………………………………………………..
The picture's of the.......................................................................................................................... ......
Sound .....................................................................................................................................................
Time .......................................................................................................................................................
Installaon..............................................................................................................................................
Other informacia.............................................................................................................. ......................
HD-MEDIA PLAYER
Applicaon……………………………...............................................................................................................
Useful notes ..........................................................................................................................................
Specificaons built-in HD-media player ................................................................................................
Troubleshoong ..………………………………………………………………………………………………………………………………
Product Informaon …………………………………………………………………………………………………………………………
2
3
3
3
3
3
4
5
5
6
6
6
6
7
7
7
7
8
8
8
8
9

INTRODUCTION
SAFETY INSTRUCTIONS
Symbol of danger Warning symbol
High voltage reminder to the user A reminder to the user to perform all acons in
accordance with the instrucons.
• Do not use abrasive materials or organic compounds (alcohol,
gasoline, etc.) when cleaning the device. You can use a small amount
of neutral detergent to clean the device body. Use a dry, so cloth or
special wipes designed for LCD monitors to clean the screen.
• Disconnect the device from the power supply and from the TV
antenna cable if you do not intend to use it for a long me, or before
a thunderstorm. Do not touch the device, power cord, or antenna
cable during a thunderstorm!
• Remove the baeries from the remote control if you do not intend
to use it for a long me.
• It is recommended to watch TV shows when the TV volume control
is set to no more than 1/2 of the maximum level. Prolonged listening
at a higher volume level can lead to hearing loss, and at the maximum
level, the speaker may fail.
• If the image on the TV screen remains staonary for a long me,
aerimages may appear on the matrix, the so-called "stac image
effect".
• Using a TV involves viewing a constantly changing image that
occupies the enre screen area.
All illustraons given in this manual are schemac
representaons of objects and may differ from their actual
appearance.
CERTIFICATION INFORMATION
WARNINGS
• * Please read this manual carefully before using the device. Save it
for future reference.
• Never open the device or the external power supply yourself, as this
may cause an electric shock, cause the device to fail, and void the
manufacturer's warranty. и техническогоPlease contact only
qualified personnel for repairs and maintenance .
• Use a pro perly rated power supply to power the device.
* Connect the device only to the audio and video components
intended for this purpose and the connecng cables intended for this
purpose.
* Do not expose the device to direct sunlight, low or high
temperatures, or high humidity. Avoid sudden changes in
temperature and humidity. When moving the device from a cool room
to a warm one or vice versa, unpack the device before starng
operaon and wait 1-2 hours without turning it on.
• Do not place foreign objects on the device. Protect the device from
bumps, falls, vibraons, and other mechanical impacts. Keep in mind
that the device's screen is fragile and can be damaged even with a
small amount of force.
• Do not cover the air vents on the back of the unit or install it in places
where it is not possible to cool the unit properly during operaon. We
recommend that you leave at least 10 see the free space around the
unit for beer venlaon.
* Install the device only on a hard, flat surface, and use the stand and
the set of fasteners included in the delivery package. When installing
on a rotang base or bracket, make sure that the power cable is not
stretched and remains free for access in case you need to quickly
disconnect the power cable from the power supply. The plug must
remain easily accessible in case of a quick disconnecon from the
power supply.
• When mounng the device on a wall, use only special fasteners and
brackets, taking into account the weight and size of the device, to
avoid personal injury and damage to the device. If necessary, contact
qualified specialists.
2

GENERAL INFORMATION
DEVICE OVERVIEW
An LED LCD TV with a built -in HD media player is an electronic
device for receiving and displaying images and audio
transmied over wireless channels, as well as signals from
video playback devices, with a built-in mul- format media
player. The device is intended for personal, family, home and
other needs that are not related to the implementaon of
business acvies.
SPECIAL FEATURES
Equipment
• High-quality color IPS matrix with LED illuminaon
* Nave resoluon of the matrix 1366x768*, 1920x1080
• 2 USB2. 0 - port for playing HD videos, audio files and
photos from external USB-compable devices
• 2 HDMI video interfaces
• Audio output LINE OUT
• Composite video input AV IN
• SPDIF digital AUDIO OUT
• Compable with VESA wall mounts
• Color temperature adjustment
• Adjustment of the speaker's tone and balance
• Preset audio sengs
TV Mode
* Sensive tuner that provides reliable recepon of analog
channels
• Automac and manual channel search funcon
• Supports Dolby Digital Audio and NICAM stereo
support • Teletext funcon
• Brightness and contrast adjustment, preset image sengs
• State-of-the-art noise reducon techniques
Personal Computer Monitor mode
• Wide range of supported resoluons
PACKAGE
CONTENTS LCD TV.........................................1 pcs.
The remote controls me...............................1 pcs.
Baeries: AAA................................................2 pcs.
Support legs for TV sets...................................2 pcs.
Elements for TV installaon............................1 pcs.
Screen cleaning wipes........................................1 pcs.
Warranty card...........................................................1 pcs.
User manual.............................................................1 pcs
INSTALLATION
For desktop placement, use a desktop stand. Align the stand
with the TV and fix it with the screw as shown in the figure.
GENERAL VIEW OF THE CONTROL PANELS
1. IR sensor of the remote control system
2. Working mode/Standby mode indicator
for TV channels/ navigate through menu items. .
3Keys – Switching the configured channels
4. Key - Volume control keys.
5. Keys – Клавиши On keys/Off and Menu
Note. The illustraons below are for reference only and may differ from the actual appearance of a parcular product.
3

GENERAL INFORMATION
Remote control funcons
Most of your TV's funcons are accessible through the menus that appear on the screen. The remote control that comes with
your device can be used to navigate through the menu and set up all the general sengs.
NOTE:
All pictures and photos in this user's guide are for reference only. The specific model may differ from the images shown .
4

GENERAL INFORMATION
INSERTING BATTERIES INTO THE REMOTE
CONTROL
1. Open the cover on the back of the remote control.
2. Install the baeries in the correct polarity.
3. Close the lid.
NOTE
: • Insert two R03 (AAA) baeries (included) into the
remote control. Please observe the polarity when installing
the baeries.
• Do not leave the remote control bullets in places with very
high temperature or humidity.
• Do not use a new baery with an old one.
• Do not mix manganese baeries with other types of
baeries.
• Do not expose the remote control sensor to direct
sunlight or lighng devices. This may cause damage to the
device.
• If you do not intend to use the remote control bullet for a
long me, remove the baeries to prevent possible damage
due to heat or corrosion of the baeries.
• If the receiver no longer responds to remote control
commands, replace the baeries with new ones.
NOTE:
1. All pictures in this manual are examples for reference, the
actual product may differ from the product image.
2. When installing the baery, do not combine new and
parally discharged baeries.
3. If the baeries are empty and are in the baery
compartment, the baeries may leak electrolyte, causing
damage to the remote control.
4. If the remote control will not be used for a long period of
me, remove the baeries to avoid leakage of electrolyte.
5. ATTENTION: The baeries must not be exposed to
excessive heat, such as prolonged
USE of the REMOTE CONTROL.
When using the remote control, make sure that the angle of
deviaon of the remote control from the imaginary
perpendicular to the infrared ray sensor on the front panel does
not exceed 30 degrees and the distance to the device does not
exceed 5.2 meters.
WARNINGS:
• * Avoid direct sunlight on the infrared sensor on the front
panel of the device.
• Replace the baeries in the remote control in a mely
manner.
• Do not drop the remote control and try to protect it from
moisture.
General view of the TV's front panel
NOTE:
All pictures and photos in this user's guide are for reference only. The specific model may differ from the images shown .
5

FUNCTIONAL FEATURES
USING THE MENU
1. Press the TV MENU key to enter the main menu.
2. Use the / keys to select one of the main menu
secons and then press OK to enter the selected item.
3. Use the / keys to select menu items.
4. Use the / keys to change the values of the selected
menu item.
5. Press the TV MENU key to exit the submenu or main menu.
CHANNEL
In the CHANNEL secon (available only in TV source mode),
you can select the following parameters: Auto-tune, Manual
DTV Setup, Manual ATV Setup, Program Editor, Signal
Informaon, CI Informaon
* The Auto-Tune parameter allows you to automacally scan
the enre TV range and remember all found TV staons.
• Parameters Manual tuning of DTV and ATV allows you to
manually adjust the frequency of an individual channel, its
sound system, as well as make precise frequency
adjustments.
* The Program Editor opon allows you to open the sort
menu and channel sengs. You can delete, rename, move, or
skip any channel using the teletext keys.
• You can get more informaon in the Signal Informaon and
CI secons Informaon
Select the channel you want to delete and press the red key.
Select the channel you want to rename and press the green
key. You can rename only ATV channels.
Select the channel you want to move to a new locaon and
press the yellow key. Move to the desired channel number
using the direcon keys and click OK. Complete the operaon
by pressing the yellow key.
Press the blue key to set and cancel channel skipping.
SETTING SATELLITE
PARAMETERS Step 1. Click Source the Source buon.
Then select the item "Satellite"
Step 2. Go to the menu, select the item "Channel"
In the channel submenuер, select "Satellite Setup"
Step 3. Inемthe windowе that appears, you can configureь
the satellite signal or select from the available list of
transponders.
IMAGE
In the IMAGE secon, you can adjust the brightness, contrast,
color, sharpness, and saturaon as you like.
1. Press / and OK to select one of the menu items.
2. Use the / keys to adjust this parameter / . In this
case, the preset mode will change to "User" and the sengs
will be saved in it.
3. The new sengs will be saved automacally.
4. Press the TV MENU key to return to the menu. Seng the "
Hue " parameter is available only in the NTSC system. The
Color temp parameter. allows you to select one of the
possible preset sengs: Medium, Warm, Cold, and User. The
"Screen" seng is only available in PC Monitor mode. You can
adjust the horizontal/vercal posion and adjust the
frequency and phase.
6

FUNCTIONAL FEATURES
SOUND
In the SOUND secon, you can select preset sengs, adjust
the low-frequency and high-frequency components of the
sound, and adjust the balance.
* The Sound Mode parameter allows you to select one of the
possible preset sengs: Standard, Music, Movie, Sports,
Personal.
* The Balance opon allows you to adjust the sound balance.
* The Auto Volume opon allows you to set the automac
volume selecon.
* The SPDIF sound opon allows you to set the surround
sound mode.
NOTE
* Use the Auto Volume opon only when the input signal is
distorted or too loud.
TIME
In the TIME secon, you can set the TV's system me, on / off
me, auto-off me, me zone, and menu mer.
* The Time parameter allows you to set the system me.
* The On-me and Off-Time sengs allow you to set the me
when the TV will automacally turn on and off, respecvely.
* The Sleep Timer opon allows you to set the me aer
which the TV will turn on.
NOTES
• If there is no signal for 15 minutes, the TV will turn off
automacally if Auto-Off mode is enabled.
* The system me is reset when the TV is disconnected from
the power supply.
INSTALLATION
In the SETUP secon, you can set the menu language, audio,
subtle language, for the hard of hearing, aspect rao, Blue
screen, Lock, HDMI CEC and Input (Source), or restore the
default sengs.
* The Menu Language opon allows you to select the OSD
display language.
* The Reset Sengs opon allows you to return to the TV's
factory sengs.
* The Blue screen opon allows you to set the blue screen
mode.
* The Subtle Language opon allows you to select the
subtle display language.
* The Aspect Rao opon allows you to select the screen
rao.
NOTE
* The Reset Sengs opon clears all saved channels and sets
the system sengs to their default values.
NOTE
The figures and illustraons provided in this user's guide are
for informaonal purposes only and may differ from the
data provided for the specific TV model. Product
specificaons and specificaons are subject to change
without noce.
OTHER INFORMATION
SAFE DISPOSAL
Your device is designed and manufactured from high-quality materials and components that can be recycled
and reused.
Check out the local system for separate collecon of electrical and electronic goods. Follow the local rules!
Thank you for choosing MODENA
equipment.
The manufacturer reserves the right to make changes to the design, design and configuraon of the product without
prior noce.
7

HD MEDIA PLAYER
The LCD TV is equipped with a built-in HD media player that
can play high-resoluon video files, audio files, or show
images. The list of supported formats includes containers and
codecs distributed on the network: MKV, MOV (H. 264),
WMV, MP4, AVI, DAT, etc. Files are played back from media
connected via the TV's built-in high-speed USB2. 0 port.
Step 1:
Download files, including high-resoluon files, from the
Internet, home network, or computer to a USB storage
device, external hard drive, or any other USB-compable
device.
Step 2:
Connect the device with the recorded files to the USB port of
the LCD TV, press the MENU key , use the / Select the
App secon and watch HD content on the big screen!
THE APP
Make sure that the USB device is connected. Use the /
keys to select the type of content to play from the three
available opons: PHOTO, MUSIC, VIDEO
Click OK to enter the device selecon menu. Use the / keys to
select the device / and click OK. A list of files and folders
will be displayed. To return to the media type selecon, click
Return.
Using the / keys and / select a file, and a preview
window will appear on the screen. Press OK to play this file in
full-screen mode.
Use the OK or INFO keys during playback to access the control
panel. Use the / keys to select the desired funcon icon /
and confirm the selecon by pressing OK. Press the
RETURN or EXIT key to close the control panel.
NOTES
• To display the info menu, select the INFO icon and click OK.
• You can select a track, subtle, or audio track from the info
menu while the video is playing.
TECHNICAL CHARACTERISTICS OF THE BUILT-IN
HDMEDIA PLAYER
• Supported video codecs and containers: AVI, TS, MM2TS,
MPG, MKV
• Supported audio codecs and containers: MP3, AAC, MPEG
Audio, AC-3
* Container size: up to 30 GB
• Video bitrate: up to 35 Mbit • s
* Audio bitrate: MP3, AAC-320 kbit/ s, WMA-192 kbit • s
* Photo: JPEG, BMP, PNG
* Subtles: SRT
• Media file Systems: FAT , FAT32, NTFS
• Storage capacity: up to 16 GB for USB flash drives, up to 1 TB
for hard drives**
USEFUL NOTES
To correctly display informaon from USB devices or other
media, observe the restricons when wring files:
File Type Limitaons
Photo Restricons Maximum size of 3 MB
Audio Files The bitrate of MP3, AAC is not more than
320 kbit/ s, WMA-192 kbit / s
Video Files Video bitrate up to 40 Mbit / s
TROUBLESHOOTING
Please check the possible causes of the problem before
contacng the service center.
Fault indicaon Troubleshoong steps The
LCD TV will not
turn on and the
power indicator is
not lit.
* Check that the power cable is properly
connected.
There is no sound. * Check that the audio cable is connected
correctly to the appropriate connector.
* Check the current volume level.
* Press the MUTE key on the remote
control. This feature may have been
acvated earlier.
The remote
control does not
work.
* Point the remote control precisely at the
LCD TV sensor from a distance of no more
than 5 meters.
* Check that the baeries are working
properly and replace them if necessary.
* Check whether the remote control
transmier or the LCD TV sensor is dirty
and whether there are any obstacles
between them.
Audio distoron. • High volume level. Turn down the
volume.
8

PRODUCT INFORMATION
Date of manufacture: You can see the informaon on the product label.
Energy efficiency sign: Label with informaon about
the card is aached to this device.
Energy consumpon informaon provided with the product,
it is determined in accordance with the rules of each country.
hps://www.modena.com/ru_ru
9