modway EEI-5300 User manual

ASSEMBLY INSTRUCTIONS
EEI-5300
V1.03.22.21
Questions? Contact us!
609.256.9000 • [e-mail]
www.modway.com

Let’s get started!
Before you begin, here are
some things to keep in mind:
Read through all of the instructions before
starting. Make sure you have all parts and
components before discarding any packing
materials.
For hardwiring installation, we suggest hiring a
professional electrician.
Do not over-tighten screws and bolts to avoid
stripping the hardware or cracking the item.
Assemble your item on a at, carpeted area,
with plenty of space to work. This will prevent
damage and scratches to your oors or the
item while you’re assembling the product.
Keep all components and packaging out of reach
of children or animals to avoid risk of choking or
suocation.
Check all parts and hardware for damage. If the
product is damaged, it should not be used.
We recommend LED bulbs. LEDs are better for
energy consumption and can prolong the life
of the xture.
Installation and electrical connections must
follow local and National Electric Code standards.
Ensure the main power supply is OFF before
starting work to prevent electrical shock.
Allow the xture to cool before changing the bulb.
Fixture may get hot when in use.
Care instructions are listed in the last step
of this manual.
Hardware included in the box:
What you need:
You may also need:
E
F
G
H
1
2
A x1
x2
x1
x2
x2
Mounting Plate
Mounting Screw
B x2Long Screw
Plastic Cover
D x1Short Green Screw
C x3Wire Cap
Phillips Head Screwdriver
Scissors
+ Ladder
+ Electrical Tape
+ Wire Strippers or Cutters
+ Power Drill
+ One (1) E26 (medium-base) Light Bulb (MAX. 60W)
Side Screw
Drywall Anchor
Phillips
Missing parts or hardware? Need assistance?
Contact us before returning your item.
We're here to help!
609.256.9000 • [e-mail]

1. Remove the Mounting Plate (A) from the
wall base and using the mounting plate as a
guide, drill 2 holes into the wall and insert 2
Drywall Anchors (F) inside the holes.
2. Ax the Mounting Plate (A) to the wall by
screwing 2 Mounting Screws (G) into the 2
Drywall Anchors (F).
Step 2
x1
x1
x2
x2
x2
Mounting Plate
Mounting Plate
Drywall Anchors
Drywall Anchors
Mounting Screws
HARDWARE
HARDWARE
A
A
F
F
G
Step 1
FOR PLUG-IN INSTALLATION
2
1
Note: Skip to the next set of installation steps if you are hardwiring your product.

Step 4
3. Attach the wall base to the Mounting
Plate (A).
4. Secure it with 2 Side Screws (E).
x1
x2
Mounting Plate
Side Screws
HARDWARE
HARDWARE
A
E
Step 3
FOR PLUG-IN INSTALLATION
4
4
3

5. Install the light bulb according to
the wattage label (E26, MAX. 60W,
bulb not included).
ATTENTION: To avoid risk of re, do
not exceed the recommended wattage
shown on the wattage label.
NOTE: The position of the lamp shade
can be adjusted as shown.
Step 6
Step 5
FOR PLUG-IN INSTALLATION
5
Great job! Your new light xture is ready for use.
CARING FOR YOUR ITEM
Indoor use only.
Clean using a non-abrasive cloth and
a mild cleaner.
Never use harsh chemicals, as they
could damage the nish or integrity
of the item.
CONNECT WITH US!
Tag us @modway_furniture and #modway
for a chance to be featured.

I
Step 2
Step 3
1. Remove the Mounting Plate (A) from the wall
base and disconnect the Wire Caps (C) from the
back side of the wall base.
2. Using scissors, cut the plastic cable ties o
from the wire.
3. Loosen the screw and release the cable from
cord anchorage.
Step 1
FOR HARDWIRED INSTALLATION
1
1
2
3
ATTENTION: If hardwiring, we suggest hiring a professional electrician.
x1
x2
Mounting Plate
Wire Caps
HARDWARE
A
C

4. Untie the knot in the cable.
5. Pull out the cable from the wall base.
6. Remove the bushing from the bottom hole
of the wall base.
Step 4
Step 6
FOR HARDWIRED INSTALLATION
4
5
Step 5
6

7. Insert the Plastic Cover (H) into the bottom
hole of the wall base.
8. Attach the Mounting Plate (A) to the junction
box in the wall and ax it with 2 Long Screws (B).
Step 7
FOR HARDWIRED INSTALLATION
7
8
x8
x8
Cam Lock
Cam Lock
B
B
x1
x1
x2
Plastic Cover
Mounting Plate
Long Screws
HARDWARE
HARDWARE
H
A
B
Step 8

Step 9
FOR HARDWIRED INSTALLATION
9
9
10
10
9. Connect wires with matching polarity. The
black xture wire connects to the black supply
wire (live wire) and the white xture wire to the
white supply wire (neutral wire). Secure each
connection using a Wire Cap (C). Connect the
copper xture wire to the ground wire and secure
the connection with a Wire Cap (C). If there is not
a supply ground wire, attach the copper xture
wire to the Short Green Screw (D) to ground.
N L
10. Attach the wall base to the Mounting
Plate (A) and secure it with 2 Side Screws (E).
x1
x2
Mounting Plate
Side Screws
HARDWARE
A
E
Step 10
x8Cam Lock
B
x2
x1
Wire Caps
Short Green Screw
HARDWARE
C
D

Step 11
FOR HARDWIRED INSTALLATION
11. Install the light bulb according to the
wattage label (E26, MAX. 60W, bulb not
included).
ATTENTION: To avoid risk of re, do
not exceed the recommended wattage
shown on the wattage label.
NOTE: The position of the lamp shade
and arm can be adjusted as shown.
11
Step 12
Great job! Your new light xture is ready for use.
CARING FOR YOUR ITEM
Indoor use only.
Clean using a non-abrasive cloth and
a mild cleaner.
Never use harsh chemicals, as they
could damage the nish or integrity
of the item.
CONNECT WITH US!
Tag us @modway_furniture and #modway
for a chance to be featured.