modway EEI-5626 User manual

A S S E M B LY INS T R UCT I O N S
V1.05.25.21
Questions? Contact us!
609.256.9000 • [e-mail]
www.modway.com
EEI-5626

PAGE 2 OF 3
Do not over-tighten screws and bolts to avoid
stripping the hardware or cracking the item.
plenty of space to work. This will prevent damage
you’re assembling the product.
Keep all components and packaging out of reach
of children or animals to avoid risk of choking
Check all parts and hardware for damage.
We reccomend LED bulbs. LEDs are better for
energy consumption and can prolong the life
Provided hardware:
Ax1
Nonwoven Fabric
Read through all
of the instructions
before starting
Make sure you have all
parts and components
before discarding any
packing materials
Let’s get started!
Missing parts or hardware? Need assistance?
Contact us before returning your item. We're here to help!
609.256.9000 • [e-mail]
C A RING F OR Y O U R I T E M
Indoor use only.
Clean using a non-abrasive cloth and a
mild cleaner.
need:
-base) Light Bulb

PAGE 3 OF 3
ATTENTION:
recommended wattage indicated on the wattage label.
CONNECT WITH US!
Tag us @modway_furniture and #modway
for a chance to be featured.
Step 1 Connect the middle metal tube to the upper metal tube.
Step 2 Connect the lower metal tube to the middle metal tube.
Step 3+ 4 Pull the wire form the bottom of the base and then
pull the wire from the side of base as shown on the drawing
Step 5 Connect the lower metal tubes to the base
Step 6 Stick the Nonwoven Fabric(A) to the bottom of the base
Step 7+8 lnstall the light bulb according to the wattage label
(E26,G45,MAX. 6OW, bulbs not included) and then install the shade.