modway EEI-5302 User manual

ASSEMBLY INSTRUCTIONS
EEI-5302
V1.03.22.21
Questions? Contact us!
609.256.9000 • [e-mail]
www.modway.com

Let’s get started!
Hardware included in the box:
You may also need:
A x3Lamp Socket Ring
+ Three (3) E26 (medium-base) Light Bulbs (MAX. 60W)
Missing parts or hardware? Need assistance?
Contact us before returning your item.
We're here to help!
609.256.9000 • [e-mail]
Before you begin, here are
some things to keep in mind:
Read through all of the instructions before
starting. Make sure you have all parts and
components before discarding any packing
materials.
Do not over-tighten screws and bolts to avoid
stripping the hardware or cracking the item.
Assemble your item on a at, carpeted area,
with plenty of space to work. This will prevent
damage and scratches to your oors or the
item while you’re assembling the product.
Keep all components and packaging out of
reach of children or animals to avoid risk of
choking or suocation.
Check all parts and hardware for damage. If the
product is damaged, it should not be used.
We recommend LED bulbs. LEDs are better for
energy consumption and can prolong the life
of the xture.
Allow the xture to cool before changing the
bulb. Fixture may get hot when in use.
CARING FOR YOUR ITEM
Indoor use only.
Clean using a non-abrasive cloth and a mild cleaner.
Never use harsh chemicals, as they could damage
the nish or integrity of the item.
CONNECT WITH US!
Tag us @modway_furniture and #modway
for a chance to be featured.

Step 1 Connect the upper metal tubes
to the center housing.
Step 2 Connect the middle metal tubes
to the center housing.
Step 3 Pull the wire through the metal
tubes as shown on the drawing and
connect the lower metal tubes to the
middle metal tubes.
Step 4 Remove the Lamp Socket Rings
(A) from the lamp sockets and place the
lamp shades onto each socket.
Step 5 Secure each lampshade with
a Lamp Socket Ring (A).
Step 6 Install the light bulbs according to
the wattage label (E26, MAX. 60W, bulbs
not included).
ATTENTION: To avoid the risk of re, do not exceed the
recommended wattage indicated on the wattage label.
1
2
3
5
4
6
A