modway EEI-4266 User manual

Customer Service 908-368-1025︱www.modway.com Page 1 of 10
Thank you for purchasing the MODWAY TV STAND !
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 70 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
EEI-4266 TV STAND
Owing to the size and weight of the TV Stand, we recommend that
Q)
x 1x 2
L)
x 6
G)
x 4
B) Camlock/Metal
Ø 15 mm x 16
R)
M)
x 6
H)
x 2
C) Dowel/Wood
Ø 8 x 30 mm x 28
P)
x 8
K)
x 8
F)
x 4
A) Cambolt/Metal
Ø 6 x 35 mm
Ø 15 mm 40 x 14 x 8mm
x 16
N)
x 2
I)
x 4
D)
x 16
O)
x 4
J)
x 1
E)
Screw/Metal
Screw/Metal Screw/Metal
M 7 x 50 mm
M 6.4 x 14 mm M 12 x 45 mm
x 1
Hardware :
Grommet Cover / Plastic Short Bracket / Aluminium Long Bracket /Aluminium
Ø 8 x 19 mm
Pin Sliding Top/Plastic
Ø 8 x 16 mm
Pin Sliding Bottom/Plastic
5002
Wall Plug/Plastic Wall Mounted Bolt/Metal Plastic
Ø 8 mm
Screw Cup/Plastic Stoper/Plastic S)
Screwdriver (Not Include)
x 1
L 4
Hex/Allen Key/Metal
Shelf Pin/Metal
Ø 5 x 15 mm
Bumper/Silicon

Customer Service 908-368-1025︱Page 2 of 10www.modway.com
Components:
5
1 2 3
67
4
8
9
Top Board x1
Center Board 1 x1 Center Board 2 x1
Back Board x1
Frame Door x2
Adjustable Shelf x1
Bottom Board x1 Side Board Left x1 Side Board Right x1
TV STANDEEI-4266

Customer Service 908-368-1025︱Page 3 of 10www.modway.com
STEP 1:
Hardware required.
Screwdriver not included
Ax4 Cx16 Sx1
TV STAND
Hardware required.
Screwdriver not included
Ax12 Cx12 Ex1
E
Ix4 Kx8 Sx1
STEP 2:
EEI-4266

Customer Service 908-368-1025︱Page 4 of 10www.modway.com
STEP 3:
STEP 4:
Bx4Sx1
TV STAND
Hardware required.
Screwdriver not included
Bx4 Hx1 Px4
Sx1
BACK VIEW
EEI-4266

Customer Service 908-368-1025︱Page 5 of 10www.modway.com
STEP 5:
STEP 6:
Hardware required.
Screwdriver not included
Bx4Px4Sx1
TV STAND
Hardware required.
Screwdriver not included
Bx4Sx1
EEI-4266

Page 6 of 10Customer Service 908-368-1025www.modway.com
STEP 7:
STEP 8:
TV STAND
Hardware required.
Dx4 E Hx1
Hardware required.
Dx12 E
EEI-4266

Customer Service 908-368-1025︱ Page 7 of 10 www.modway.com
STEP 9:
STEP 10:
TV STAND
Determine your desired (Y)
height, then subtract by 127 mm.
This is the drill holes height from
the floor (Z).
Please use minimum 1 hole from each hole group to apply the wall plug
and screw. Use additional holes when necessary.
Different wall materials require unique wall fasteners.
The wall plugs (M) and screws (L) are designed for fixing to concrete walls only.
Please consult your local hardware store to ensure you are using the correct
hardware for your wall type.
( Z )
127
( Y )
EEI-4266
* Long Bracket
L M
J

Customer Service 908-368-1025︱Page 8 of 10www.modway.com
STEP 11:
STEP 12:
TV STAND
Hardware required.
Screwdriver not included
Jx1 Lx4
L
J
M
Mx4 Sx1
Nx2Sx1Hardware required.
Screwdriver not included
EEI-4266
Use Waterpass to ensure the drill position

STEP 13:
Customer Service 908-368-1025︱Page 9 of 10
TV STAND
Ox4Hardware required.
STEP 14:
Hardware required.
Fx4Gx4Qx2
EEI-4266
www.modway.com

Rx1
Q
Hardware required.
Assembly is complete. The TV Stand is ready to enjoy now !
STEP 15:
TV STAND
Customer Service 908-368-1025︱Page 10 of 10www.modway.com
Q
EEI-4266
STEP 16: