Moebelix T-0608ps User manual

Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
Requires two people and takes 2-3 hours for lnstallation.
Quick & Easy Assembly
Ridge Reinforced Walls
Available in Various Sizes
T-0608ps

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .Please be aware: this unit takes two people
about one full day to complete.
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
It requires two people a full
day to complete installation

PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.

1
1
1
1
1
14R
15L
15R
16L
16R
13
13-1
2
2
1060mm
1080mm
1080mm
1080mm
1080mm
6
21L
21R
7L
7R
1981mm
1750mm
1090mm
1
1
1
1076mm
1076mm
1
1
PART
NO. Qty.
PART
NO. Qty.
12
1
1
1
1
1
2
1
2
1
1
2
3L
3R
5
9
20
11
11-2
B1
12L
14L
1372mm
1800mm
12R
692mm
692mm
1030mm
1788mm
1732mm
1
128mm
881.4mm
1788mm
1
1105mm
1105mm
1060mm
2
6
1
1
1
22
18
4L
4R
10
17 11
17-2 2
233mm
566mm
1750mm
1750mm
1730mm
1929.4mm
1730mm
P1
P3
P4
P5
15
3
1
2
1750mm
1930.4mm
1930.4mm
2
1930.4mm
P2
3
1-1
516mm
1
9-1
504mm
11-1 1
504mm
1
10-1
660mm
17-1 1
660mm
1
1
19L
19R
238mm
238mm238mm

PART
NO. Qty.
G2 4
2
GD
GB
GC
4
4
GS 2
F1
F2
F3
S3
PART
NO. Qty.
1740X570mm
D1 1
8
S2
1740X570mm
D2 1
310
58
167
252

P1
P1
P1
P1
P1
P1
P1
P1
P1
13
13
D1
D2
18
4L
4R
13-1
13-1
6
7L
7R
16L
16R
15L
15R
12L
12R
14L
14R
11-2
11-1
11
B1
B1
21L
21R
GC
GC
GC
GC
17-1
17
10-1
10
P2
P2
P4
P3
P3
P3
17-2
1-1
1-1
1-1
1
1
2
3R
3L
5
19R
19L
22
22
P5
P5
17-2
P1
P1
P1
P1
P1
P1
20
20
9-1
9

F1
PART
NO. Qty.
1
1
3L
3R
1
1
3L
3R
F1
F1
-7-
1
PART
NO. Qty.
2
21
1-1 3
F1
Ⅲ
Ⅰ
Ⅱ
Ⅲ
Ⅲ
Ⅲ
1
1
2
1-1
1-1
1-1
F1
Ⅰ
Ⅱ
2
1-1
1-1
1-1

PART
NO. Qty.
1
5
5
F1 F1
1、Wen diagonal measurements are
equal,the frame is square.
2、The Floor Frame must be
BOTH square AND level or the
holes will not line up properly.
PART
NO. Qty.
P1 2
-8-
F1
S3 F1
S3
1
13 P1 13
5
F2
S3
P1

-9-
PART
NO. Qty.
1
13-1
P1 2
F1
S3 F1
S3
P1 P1
13-1
PART
NO. Qty.
1
13-1
P1 2
F1
S3 F1
S3
P1
P1
13-1
P1
P1
13-1
PART
NO. Qty.
P1 2
1
13
F1
S3 F1
S3
P1
P1
13
P1
P1
13
F2
S3
F2
S3
F2
S3

PART
NO. Qty.
-10-
PART
NO. Qty.
1
9
S3
F1
9
21L 1
1
20
21L
S3
F1
20
9-1
1
9-1
F1
9-1
9

-11-
PART
NO. Qty.
21R 1
1
20
20
21R
S3
F1
PART
NO. Qty.
1
1
4L
4R
4L
4R
S3
F1
S3
F2
PART
NO. Qty.
7L
7R
1
1
61
S3
F1
G2X4
7L&7R
G2 4
7L
7R
6

-12-
1
1
1
15R
16R
19R
PART
NO. Qty.
16R
19R
15R
1
1
1
15L
16L
19L
PART
NO. Qty.
16L
19L
15L
PART
NO. Qty.
P5 2
P5
P5
F1
F1

F1
F1
F1
F1
-13-
PART
NO. Qty.
22
2
22
F1
PART
NO. Qty.
114R
1
1
12L
14L
12R 1
F1
F1
F1
F1
19L
12L
14L
19R
12R
14R

PART
NO. Qty.
2
B1
B1
B1
F1
S3
F1
S3
PART
NO. Qty.
11 1
F1
F1
S3
S3
11
-14-
PART
NO. Qty.
11-2 1
11-2
F1
F2
F1 S3
F1
11-1
11-1 1
11
11-1

-15-
PART
NO. Qty.
P1 7
P1
F1
S3
S3
F1
PART
NO. Qty.
P3
P4
3
1
2
P2 P2 P4 P3 P3 P3 P2
F1
S3
PART
NO. Qty.
GS 2
1
10
P1 P1 P1
P1
P1
P1
10-1 10-1
GS
GS
10 10
1
10-1

PART
NO. Qty.
D1 1
D2 1
2
GB
GB
F2
D1&D2 x2
PART
NO. Qty.
17-1 11
17-2 2
10
17-1
17-2
17-2
GC
GC GC
GC
F1
F1
F1
-16-
F1
S3
10-1
17
GC 4
17 11

PART
NO. Qty.
6
18
D1&D2
18
18
18
S3
F1 F2
PART
NO. Qty.
GD 4
D1 D2
GE S3 F2
-17-
S3
F2 x2

F3
18
7R G2
F3
18
7L G2
D1 D2
-18-