Moebelix T-PSF56-H154 User manual

Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
Requires two people and takes 1-2 hours for lnstallation.
Quick & Easy Assembly
Ridge Reinforced Walls
Available in Various Sizes
T-PSF56-H154

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.

PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.

PART
NO. Qty.
1
PART
NO. Qty.
2
3R
4L
1394mm
3L
25L
25R
5
6
7
8
9
10L
10R
11
4R
15
17
20
21L
21R
608mm
608mm
955mm
955mm
1560mm
1560mm
765mm
876mm
895mm
895mm
1360mm
910mm
910mm
1360mm
1509mm
981mm
411mm
1
1
1
1
1
1
1
1
1
1
1
1
2
4
6
1
1
1
1
1
1
1
1
C1
C2
C3
C4
C5
C6
1
1
1106mm
1106mm
915mm
915mm
276mm
134mm

1560mm
PART
NO. Qty. PART NO. Qty.
1550X415mm
D1 1
D2 1
P1
P3
P6
P5
P7
6
2
2
2
P2 4
1550X415mm
P4 2
1
G2 4
2
GD
GB
GC
4
F1
F2
F3
S3
220
8
40
204
S2 90
4
PART
NO. Qty.
P0
888mm
2
1560mm
1560mm
1560mm
1509mm
1509mm
1509mm

10R
11
10L
25L
25R
7
8
20
20
20
20
20
20
6
D2
D1
GB
3L
5
3R
4R
4L
1
1
P6
P6
P2
P2
P3
P2
P2
P3
P1
P1
P1
P1
P0
P0
C5
C6
C4
C3
C2
C1
9
P7
P5
P5
P4
P4
17
17
17
GC
GC
GC
GC
17
21R
21L
15
15
P1
P1

F1
F1
PART
NO. Qty.
1
1
3L
3R
3L
3R
F1
F1
-7-
4L
PART
NO. Qty.
1
F1
4R
4L
4R 1
4L
4R
1
1
1
PART
NO. Qty.
2

PART
NO. Qty.
P6 1
F1
S3
PART
NO. Qty.
1
5
5
F1 F1
1、When diagonal measurements are
equal,the frame is square.
2、The Floor Frame must be
BOTH square AND level or the
holes will not line up properly.
-8-
5
P6

PART
NO. Qty.
1
-9-
F1
Ⅱ
Ⅰ
S3
P2
F2
S3
Ⅱ
Ⅰ
5
PART
NO. Qty.
P1 1
F1
S3
P1
5
PART
NO. Qty.
1
P2
Ⅰ
F1
Ⅱ
S3
F2
S3
5
P2
P2

-10-
PART
NO. Qty.
P6 1
F1
S3
5
P6
PART
NO. Qty.
1
P2 Ⅰ
F1
Ⅱ
S3
F2
S3
P2
PART
NO. Qty.
P1 1
5
P1
F1
S3

-11-
PART
NO. Qty.
1
P2
F1
Ⅱ
Ⅰ
S3
F2
S3
P2
PART
NO. Qty.
1
1
10L
10R
4R
4L
F1
PART
NO. Qty.
1
1
9
11
5
9
11 9
4R
4L
10R
10L
F1
S3
F1
S3

87
PART
NO. Qty.
1
7
1
8
G2 4
7&8
G2
-1 2 -
1
6
6
7
8
PART
NO. Qty.
4
P1
P3 2
F1
S3
F2
S3
PART
NO. Qty.
1
1
21L
21R
21R
21L
F1
25L
25R
1
1
F1 S3
25R
25L
F1
S3
P1
P1
P1
P3
P1
P3

PART
NO. Qty.
1
C1
C2 1
-1 3 -
C2
C1
C2
C1
21L&21R
C1&C2
F1
F1
S3
PART
NO. Qty.
P0 2
P0
1
C3
C4 1
C3
C4
C1&C2
P0 C3&C4
F1
S3

-1 4 -
PART
NO. Qty.
C5
C6
1
1
C5
C5
C6
F1
F1
S3
PART
NO. Qty.
P5
P7
2
P4 2
1
P4
P4
P5
P5
P7
F1
S3

-1 5 -
PART
NO. Qty.
15
17
2
4
4
GC
17 17 15
15
17
17
GC
F1
S3
F1
PART
NO. Qty.
6
20
D1&D2
20
20
20
S3
F1 F2
x2
S3
F2
PART
NO. Qty.
D1 1
D2 1
2
GB
x2
GB
F2
D1&D2

-16-
F3
7&8 G2
PART
NO. Qty.
GD 4
D1 D2
GE S3 F2
D1 D2

Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
Requires two people and takes 0.1 hours for lnstallation.
Quick & Easy Assembly
Ridge Reinforced Walls
Available in Various Sizes
The window set is only used to replace YX- Series
metal shed with 156x43cm metal wall panels
If you bought metal shed and window set at the same time,
please read this manual. If not, please ignore manual

Disassemble P3
S3 F1
P1 P1-1
P3 P1-1
P1-1
Pay attention to direction of window
make sure it assembles correctly.