Moman AM4 User manual
Thank you for choosing MOMAN product. Please read this manual carefully
before use and follow all instructions mentioned herein.
AM4 Mixing Console
User Manual
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Package includes the following items:
1.Mono input jack
MIC/LINE: are used for connecting XLR and TRS Phone. Microphones and
instruments are accessible.
2.Stereo input jack
Used for connecting line-level instruments such as electric keyboard and audio
device. TRS Phone and RCA plug are accessible.
MOMAN
Caring For Your MOMAN Product Product Introduction
AM4 Mixing Console x1
3.5mm TRS to 2-Male RCA
Cable(138cm) x1 Charging
Cable x1
3.5mm TRRS to Dual 3.5mm TRS
Cable(19cm) x1
Package List
Total Harmonic Distortion
Frequency Response
S/N
MAX Outputs
Input/Output Impedance
Input Channel Sensitivity
Parametric EQ
≤0.1%
20Hz~20KHz/±0.5dB
≥80dB
4V/MAX
MIC
Mono
Stereo
MIC
Stereo CH. Input
EFX Send
EFF Return
HI
LOW
2.4KΩ
11KΩ
100KΩ
-60dB
-40dB
-20dB
-20dB
12KHz±15dB
60Hz±15dB
Unit 25 Basepoint Business Centre, Aviation Park,
West Christchurch, United Kingdom BH23 6NX
www.momanx.com www.momanx.co.uk
@MomanGlobal
https://moman.co/youtube
Moman (UK) Limited
Moman Website Moman Facebook
Specications 3.Phantom power switch
4.Phantom power indicator
5.[GAIN] knobs
Used to adjust the gain of the input signal
6.[HIGH] knobs
Adjust the knobs to control the channel treble tone.
7.[LOW] knobs
Adjust the knobs to control the channel bass tone.
8.[EFX] buttons
Used for accessing channel effect.
9.Channel Volume
Adjust the knob to control the signal volume.
10.[ST/USB] button
Used for switching ST and USB input signal.
11.[MAIN] knob
Main volume control, used to make the main output signal level achieve ideal
state.
12.[PHONES] knob
Used to control the headphone monitoring volume.
13.[REPEAT] knob
Used to adjust the echo repetition frequency.
14.[DELAY] knob
Used to adjust the repeat interval of effect echo.
15.Headphone jack
16.Power indicator
17.Indicator for signal output status
18.MP3 master control
Short press to pause/play; long press to switch to recording state, and
record the output signal of main channel to USB storage.
Short press for last song; long press to reduce the volume.
Short press for next song; long press to increase the volume.
MODE-function key, short press to switch the working status among LINE /BT /
PC; long press for loop playback mode.
Bluetooth: Short press the MODE/BT button, when the display screen shows
“BE”, the Bluetooth is on. Then search for device named MIXING BT with your
phone and pair.
19.MP3 display
Indicate the operation and playback status of MP3.
20.MP3 USB jack
21.Stereo output interface
22.Recording terminal
The group of ports are used for main output connection of stereo and recording
interface.
23.USB power supply interface
Can be connected to an external 5V power supply or computer USB interface.
When connected with computer, the console functions with external sound card.
24.MP3/PC connection working status switch
When the console is powered by computer, you can switch the connection
between MP3 and PC by this button; when the console is powered by an
external 5V power supply, it can only switch to the corresponding status of MP3.
