MoNiBloom BAMBOO Natural User manual

USER GUIDE
Natural / Stylish / Unique
HARDWARE
BAMBOO COAT RACK
FINISHED PRODUCT
Scan the QR code to view the
assembly video.
ATTENTION
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
5
Wipe frames with water gently, do not use bleach, acid, or other solvents.
4
Keep children away during assembly. This item contains small parts which can
be swallowed by children.
3
Do not discard any of the packaging until you have checked that you have all
the parts and pack of fittings.
2
Please always read and follow the assembly, maintenance and operating
instruction.
1
Install Door Stopper (y) on 1 Small
Panel (j) with Small Screws (C).
Install Gasket (w) on Door Panels (d)
with Small Screws (C).
Insert Dowel (u) on Drawer Panel (p).
Secure Drawer Front Panel (r) and
Drawer Side Panels (m) with
Medium Screws (B).
①Insert Drawer Bottom Panel (f)
along the groove.
②Secure Drawer Back Panel (q) with
Medium Screws (B). Install Door
Handle (v) with Flat Head Screw (E).
③
DRAWER ASSEMBLY INSTRUCTIONS
(B) Medium Screw (C) Small Screw
(F) Allen Wrench
(A) Large Screw
(a) Left Side Frame x 1 (f) Drawer Bottom Panel x 1
(o) Medium Back Panel x 1
(b) Center Frame x 1
(d) Door Panel x 2
(e) Large Panel x 1
(p) Drawer Panel x 1
(c) Top Panel x 1
(n) Large Back Panel x 2
(l) Small Back
Panel x 1 (m) Drawer Side
Panel x 2
(t) Hook x 2 (u) Dowel x 2
(w) Gasket(v) Door Handle
(D) Bolt (E) Flat Head
Screw
(x) Door Stopper
(s) Side Pillar x 2
(q) Drawer Back Panel x 1
(r) Drawer Front Panel x 1
(j) Small Panel x 4
(With Groove) (k) Small Panel x 3
(Without Groove)
(g) Long Hanging Rod x 1
(h) Short
Hanging Rod x 2 (i) Hanging Rod Support Slat x 1
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com

Position and secure Side Pillar (s) and Drawer
Panel (p) with Large Screws (A).
1Install Large Panel (e) with Large Screws (A). 2Install Hanging Rod Support Slat (i) and Short
Hanging Rods (h) on Side Pillar (s) with Large
Screws (A).
Short Hanging
Rod (h)
Hanging Rod
Support Slat (i)
3Insert Small Back Panel (l) along the groove. 4Install Side Pillar (s) with Large Screws (A). 5
Insert Medium Back Panel (o) along the groove.
6Position and secure Center Frame (b) with Large
Screws (A).
7Install Long Hanging Rod (g) with Large Screws
(A).
8Install Top Panel (c) with Large Screws (A). 9
Small Panel (j)
with Stopper
Small Panel (j)
with Stopper
Small Panel (j)
without Stopper
Small Panel (j)
without Stopper
Small Panel (k)
Small Panel (k)
Small Panel (k)
Install Small Panels (j)(k) with Large Screws (A)
as picture shown.
10
Insert Large Back Panels (n) along the groove.
11 Position and secure Left Side Frame (a) with
Large Screws (A).
12 Install Door Panels (d) with Bolt (D).
13 Install Door Handles (v) with Flat Head Screws
(E) and Hooks (t) on Hanging Rod Support Slat (i)
with Large Screws (A).
14 Insert drawer.
15
ASSEMBLY INSTRUCTIONS
© 2020-2021 by Pundarika LLC - MoNiBloom.com
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com