Monstertech MTS HOTAS User manual

MTS HOTAS
JOYSTICK / THROTTLE
Instruction Manual
Bedienungsanleitung
Mode d‘emploi

2MTSIM MTS HOTAS INSTRUCTION MANUAL
PARTS
1x 1x
1x
1x
1x
80
80
230
70
40
80
[dimensions in mm / different scales]
No extra or spare parts listed!
350
40
80
Mounting plate for
joystick or throttle
as ordered.
80
40
1x
usually pre-assembled on
the 70 mm profile above
1x
80
40
80
80
1x

3MTSIM MTS HOTAS INSTRUCTION MANUAL
1x
6x
3x
2x
4x
30
Ø8
M8
16
8
8,4
24
8,1
16
10
26,1
80
40
1x
1x
1x
2x
6x 6x
black
8
40
8
35
8
18
2x
16
8
silver
BAG 1
BAG 2
SWIVEL ADAPTER
M8
5x

4MTSIM MTS HOTAS INSTRUCTION MANUAL
1x
left side
right side
One bracket for
left OR right side
as ordered.
1x
60
M8
M8
1x 1x
8
10
8
14
2x 2x
8,4
16
MTS HOTAS Swivel Extra Plate Kit

5MTSIM MTS HOTAS INSTRUCTION MANUAL
ASSEMBLY
4x
slot nut
M8
2x
universal
connector 2x
M8x30
cap
threads at
this end
cap with
open slots
(usually pre-assembled)
loosely
pre-assembled

6MTSIM MTS HOTAS INSTRUCTION MANUAL
2x
pre-assembled
universal
connector
hex key
choose position
(height positioning)
then tighten the screws
Extension for
better tightening
power.

7MTSIM MTS HOTAS INSTRUCTION MANUAL
2x
slot nut
suitable for the moun-
ting plate you ordered
(e.g. M6 or M8)
e.g.
2x
M8x16
flat head
(depends on the mounting
plate you ordered)
Mounting plate for
joystick or throttle
as ordered.
black or silver

8MTSIM MTS HOTAS INSTRUCTION MANUAL
2x
M8x14
2x
washer Ø16
Attention!
There is a left and
right side version of
this bracket!
The opening should
face towards the
seat.
Screw on
loosely at
first!

9MTSIM MTS HOTAS INSTRUCTION MANUAL
swivel cap
detailed view
swivel
inlay
lever
axial
ball
bearing
knob
axial
ball
bearing

10MTSIM MTS HOTAS INSTRUCTION MANUAL
Assembly for the
left side of the rig.
Assembly for the
right side of the rig.
loose fit

11MTSIM MTS HOTAS INSTRUCTION MANUAL
cap
3x
slot nut
M8

12MTSIM MTS HOTAS INSTRUCTION MANUAL
3x M8x18
3x washer Ø24
assembly for the
left side of the rig
assembly for the
left side of the rig
assembly for the
right side of the rig
choose desired
distance

13MTSIM MTS HOTAS INSTRUCTION MANUAL
knob
set screw
M8x10
loose fit
double slot nut
2x M8

14MTSIM MTS HOTAS INSTRUCTION MANUAL
4x slot nut M8
on the side of the rig where
you want to assemble
4x universal connector
4x M8x30
very
loose
fit

15MTSIM MTS HOTAS INSTRUCTION MANUAL
choose desired position
before tightening the bolts

16MTSIM MTS HOTAS INSTRUCTION MANUAL
tighten knob first
and then lever

17MTSIM MTS HOTAS INSTRUCTION MANUAL
Slide down until it touches
the profile. Then tighten the
green marked screws.
rig
faded
out
Tighten
set screw
and knob.

OPERATION
Loosen knob 1 and lever 2 to swivel.
Tighten lever 2 in any desired position.
Tighten knob 1 in working position for
more stability.
1
2
21-09-2023