Montezuma M3DWK User manual

OWNER'S MANUAL
3-DOOR
WORKSTATION
M3DWK
www.montezumastorage.com

2
LIFE ORGANIZED
Montezuma is committed to helping you succeed in both your work
and personal life by being organized, prepared and equipped with
the right tools, gear and home supplies at your finger tips.
We are here to ensure that your life is organized.
Thank you for your purchase of this Montezuma 3-Door Workstation.
ATTENTION
TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND
UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS
PRODUCT FOR THE FIRST TIME. SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Fill in the following information and retain
this owner's manual for future reference:
MODEL(S):
DATE OF PURCHASE:
PLACE OF PURCHASE:
RECEIPT NO:

3
SPECIFICATIONS
OVERALL DIMENSIONS:
77.6 cm W x 49 cm D x 206.6 cm H
(30-1/2" W x 19-1/4" D x 81-3/8" H)
1 x 1-DOOR WALL CABINET
DIMENSIONS:
77.6 cm W x 30.5 cm D x 51 cm H
(30-1/2" W x 12" D x 20" H)
MAXIMUM SHELF WEIGHT:
23 kg (50 lb)
2 x PEGBOARD PIECES
DIMENSIONS:
77.6 cm W x 32 cm D x 2.2 cm H
(30-1/2" W x 12-5/8" D x 7/8" H)
MAXIMUM WEIGHT CAPACITY: 23 kg (50 lb)
* per each pegboard
2 x POSTS
DIMENSIONS:
5.5 cm W x 3.1 cm D x 166.1 cm H
(2-1/8" W x 1-1/4" D x 65-3/8" H)
1 x 2-DOOR BASE CABINET
DIMENSIONS:
77.6 cm W x 46 cm D x 87.9 cm H
(30-1/2" W x 18-1/8" D x 34-5/8" H)
MAXIMUM SHELF WEIGHT:
45 kg (100 lb)
* Dimensions do not include adjustable feet.

4
1
6
9
8
10
12
3
4
5
3
2
14
15
16
1
11
5
9
12
8
7
13
10
1
PARTS LIST
x x x
The keys are
taped inside
the cabinets.

5
To order replacement parts, email [e-mail] or call 1-800-459-4409
(Monday–Friday, 8:00 am–4:30 pm, CST). Have the part number and quantity ready.
Replacement keys may be ordered using the code that appears on the face of the lock.
Not all parts are covered under warranty. Those parts not covered can be purchased.
REF DESCRIPTION PART NUMBER QTY
1M6 x 16 mm Hex Socket Head Screw 320327 54
2Washer 324050 6
3M6 x 65 mm Hex Tapping Screw 320316 6
4Gas Strut 303002 2
5End Cover 314195 4
6Shelf 233955 1
7Shelf 121418 1
8Shelf Support 226078 8
9Lock and Key [phone] 2
10 M6 Hex Flange Nut 323085 2
11 Worktop 571406 1
12 Adjustable Feet 110 0 6 8 4
13 Magnet 312033 2
14 Post A 226911 4
15 Post B 240368 2
16 Pegboard 226913 2

6
x x x
Lock and Key
For securing
your valuables
M6 Hex Flange Nut
For use with M6 x 16 mm
Hex Socket Head Screw
when attaching unit to other
units
End Cover
For covering holes for
attaching to other units,
if not in use
Shelf Support
For supporting
adjustable shelves
Shelf
For placing at
desired height
Shelf
For placing at
desired height
M6 x 65 mm Hex
Tapping Screw
For securing unit
to the wall
Gas Strut
Pre-installed
For opening door
Washer
For use with M6 x 65 mm
Hex Tapping Screw
54
6
41 1
2
26
8 2
M6 x 16 mm Hex Socket Head Screw
8 for attaching top panel of wall cabinet
11 for attaching bottom panel of wall cabinet
4 for attaching worktop to base cabinet
11 for attaching bottom panel of base cabinet
18 for attaching pegboards and wall cabinet to posts
2 for attaching unit to other units

7
Worktop
For attaching to top
of base cabinet
1
Magnet
Pre-installed
For keeping doors closed
Adjustable Feet
For attaching
to bottom panel
42
Pegboard
For hanging tools
Post A
Top and bottom posts
in each stack
Post B
Middle post in
each stack
224

8
A S S E M B LY
BASE CABINET ASSEMBLY
Carefully separate the front and back panels of the base cabinet, allowing the side panels
to unfold completely.
Make sure the unit is upside down.
Insert the lip of the bottom panel into the slot in the back of the cabinet, then tilt the
bottom panel down. Make sure the holes are aligned.

9
Attach the bottom panel using eleven M6 x 16 mm hex socket head screws.
Screw the four adjustable feet into the cabinet bottom. Turn the cabinet upright.

10
Attach the worktop to the base cabinet using four M6 x 16 mm hex socket head screws.

11
Insert four shelf supports inside the cabinet at the desired height.
Place the shelf on the shelf supports.
WARNING: DO NOT STACK A 2-DOOR BASE CABINET ON TOP OF ANOTHER
CABINET.

12
WALL CABINET ASSEMBLY
Carefully separate the front and back panels of the wall cabinet, allowing the side panels
to unfold completely.
Make sure the unit is upside down.
Insert the lip of the bottom panel into the slot in the back of the cabinet, then tilt the
bottom panel down. Make sure the holes are aligned.

13
Attach the bottom panel using eleven M6 x 16 mm hex socket head screws.
Turn the cabinet back to the upright position. Attach the top panel using eight
M6 x 16 mm hex socket head screws.

14
Insert four shelf supports inside the cabinet at the desired height.
Place the shelf on the shelf supports.

15
PEGBOARD BACK WALL ASSEMBLY
Attach two A posts to the back of the base cabinet using three M6 x 16 mm hex socket
head screws per post.

16
Slide two B posts fully onto the A posts.
Place one pegboard on the front, making sure the grommet hole is on the bottom.
Attach using two M6 x 16 mm hex socket head screws per post.

17
Slide two A posts onto the B posts. Make sure to leave enough room at the top for the
wall cabinet.
Place one pegboard on the front, making sure the grommet hole is on the top.
Attach using two M6 x 16 mm hex socket head screws per post.

18
Insert two M6 x 16 mm hex socket head screws into the top holes of the wall cabinet, but
do not fully tighten. Hang the wall cabinet on the top of the posts, then fully tighten the
screws.
Attach the bottom of the wall cabinet to the posts using two additional M6 x 16 mm hex
socket head screws.

19
INSTALLATION
If you have purchased other units, assemble them now, then put all units together to build
your garage.
For a better appearance, attach the sides of each unit together using M6 x 16 mm hex
socket head screws and M6 hex flange nuts at both top and bottom.

20
Hide holes on the exterior ends of the units with the supplied end covers, if necessary.