montpellier MS310-2W User manual

194.5cm Tall Combi Fridge Freezer
MS310-2 - White & Silver MS317-2W - White
Please read these instructions carefully before attempting to install or use this appliance.
We recommend that you keep these instructions in a safe place for future reference.
Installation and Operating Instructions
THE PERFECT BALANCE OF FUNCTION AND STYLE
LAUNDRY - DISHWASHING - COOKING - COOLING

Thank you for choosing this Montpellier fridge freezer.
Our refrigeration products have been designed to provide you with the best combination of style, reliability and
performance to give you years of trouble-free use.
You may be familiar with a similar product, but please take time to read these instructions carefully before installing
or using your fridge freezer to ensure you get the most from your purchase.
We recommend that you keep this manual in a safe place for future reference.
Your fridge freezer is covered by a comprehensive two year Parts & Labour
Guarantee. In the unlikely event that you experience a problem with your fridge
freezer, you can rest assured that you are fully protected against the cost of
repairs for the first two years. Please note that any claim must be
accompanied by the model reference number, serial number and proof of
purchase.
To activate your guarantee, you will need your product serial number. This can
be found on the rear of the machine.
There are two ways to register your Guarantee:
•Online: Visit the Support page on our website and complete the online Product
Registration form. www.montpellier-appliances.com
•By Post: Simply detach and ll in the form provided, attach a stamp and send
it in the post. Don’t forget to include your e-mail address so that we can send
conrmation through to you.
Welcome
Note: We are unable to take registrations over the phone.
ACROSS INTEGRATED COOLING
YEAR
GUARANTEE
PA R T S & L A B O U R
www.montpellier-appliances.com

GUIDELINES CONCERNING THE SAFETY OF USE 1
GENERAL INFORMATION 3
DESCRIPTION OF THE APPLIANCE, BASIC PARTS 4
INSTALLATION AND OPERATING CONDITIONS OF
THE APPLIANCE 6
ELECTRONIC CONTROL PANEL DESCRIPTION.
TEMPERATURE REGULATION 8
USING THE REFRIGERATOR-FREEZER EFFICIENTLY 10
DEFROSTING 12
CLEANING AND CARE 13
CHANGING THE DIRECTION OF THE DOOR OPENING 13
TROUBLE-SHOOTING 15
TRANSPORT 16
ENVIRONMENTAL PROTECTION 16
PRODUCT FICHE 17

1
GUIDELINES CONCERNING THE SAFETY OF USE
Some provisions in this user manual are unified for refrigerating
products of different types (for a refrigerator, refrigerator-freezer or
freezer). CAREFULLY READ THE INSTRUCTION MANUAL. The
Manufacturer shall not be held liable for damage arising from the failure
to observe the instructions contained in this manual. Keep this manual
for future reference, or to pass it over to the next user.
–Do not cover the ventilation holes at the top and on the sides of the
appliance.
–Do not use any mechanical means or electrical devices to hasten the
thawing process when cleaning the freezer compartment.
–Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
–If the supply cord is damaged it must be replaced by the
manufacturer, manufacturer service agent or a similarly qualified
person, in order to avoid a hazard.
–Disposal of the appliance should be according to national rules.
–Do not damage the appliance refrigeration system. It contains the
refrigerant gas R600a. If the refrigeration system is damaged:
•Do not use any open flame.
•Avoid sparks―do not turn on any electrical appliances or
lighting fixtures.
•Immediately ventilate the room.
–Air the room in which the appliance is placed for a few minutes (the
size of the room for a product containing isobuthane / R600a must
be at least 4 m3) to avoid damage to the cooling system.
–Do not allow children to play with the appliance or to plug it in or
unplug from the electricity supply socket. Do not allow children to
play with the packaging material from the appliance.
–This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
–Cleaning and user maintenance shall not be made by children
without supervision.

2
The appliance should only be connected to an earthed socket
installed in accordance with the regulations. Make sure that
the supply voltage corresponds with the voltage marked on
the rating label. This product complies with all binding CE
labelling directives. The earthed electrical socket by which the
appliance is connected to the mains should be in an accessible
place. It is a legal requirement that the appliance is properly
earthed. The manufacturer will not be held liable for any damage or
injury which may result from the failure to fulfil this requirement.
–TO AVOID THE EXPOSURE TO DANGER, ALWAYS HAVE FAULTY
CABLE BE REPLACED ONLY BY THE MANUFACTURER, BY OUR
CUSTOMER SERVICE OR BY QUALIFIED PERSON AND WITH A CABLE
OF THE SAME TYPE.
–It is forbidden to readjust or modify any parts of the unit. It is crucial
not to damage the capillary tube visible in the compressor recess. The
tube may not be bent, straightened or wound. If the capillary tube is
damaged by the user the guarantee will be void.
–It is forbidden to use a technically damaged appliance.
–The appliance can’t be disposed of by burning.
–Do not store beverages in bottles and cans, especially carbonated
beverages, in the freezer chamber. The cans and the bottles may
explode.
–Do not put frozen products, taken out directly from the freezer
(lollies, ice cubes, etc.) into your mouth; their low temperature may
cause severe frost-bite.
–The appliance should be used only for freezing and storing foodstuffs.
–This appliance is not designed for the storage of explosive substances
such as aerosol cans with a flammable propellant.
–It is prohibited to store petrol and other flammable liquids near the
appliance.
–The appliance operates properly at the ambient temperature (see
product fiche). Do not use it in the cellar, unheated summer cottage
during autumn and winter.
–Pull the plug out from the mains socket before each maintenance
activity. Do not pull on the cord, but hold the body of the plug instead.
–When performing activities, such as cleaning, maintenance or
moving, the appliance must be completely disconnected from power
supply (by pulling the plug out from the socket)
–If the appliance is unplugged (for cleaning, moving to another place,
etc.), it may be repeatedly switched ON AFTER 15 MIN.

3
–Do not place any switched on electrical devices (such as microwave ovens,
hair dryers, irons, electric kettles or other electrical devices) on top of
the appliance because this may cause ignition of plastic parts.
–Do not place any dishes with liquids on top of the appliance and do not keep
flowers in vases or other liquid-filled vessels on the appliance.
–Do not climb on or sit on the appliance, do not lean on or hang on the
appliance doors and do not allow children to do this.
DO NOT TRY REPAIR THE APPLIANCE ON YOUR OWN. ALWAYS
CONTACT AN AUTHORIZED TECHNICIAN. TO AVOID THE
EXPOSURE TO DANGER, ALWAYS HAVE FAULTY CABLE BE
REPLACED ONLY BY THE MANUFACTURER, BY OUR CUSTOMER
SERVICE OR BY QUALIFIED PERSON WHIT A CABLE OF SAME
TYPE.
ATTENTION! DO NOT REMOVE THE COVER OF THE LIGHT EMITTING
DIODE (LED) LUMINAIRE! If the cooling appliance is equipped with light
emitting diode (LED) luminaire and the lighting is not functioning, please contact
a maintenance technician to have it replaced. THE LUMINAIRE CAN BE
REPLACED ONLY BY A MAINTENANCE TECHNICIAN!
GENERAL INFORMATION
Model MS317-2W
The appliance is a two–compartment refrigerator-freezer combination. The
freezer compartment is equipped with a frost-free refrigeration system
(“No Frost”). The refrigerator compartment is designed for the brief storage
of fresh food. The freezer compartment is designed for the freezing and long-
term storage of food products.
In the refrigerator compartment is the cold section. A temperature of -2 °C to
+3 °C is maintained in the cold section which is suitable for short-term storage
of meat, fish and similar products.
Model MS310-2W
The appliance is a two–compartment refrigerator-freezer combination. The
refrigerator compartment is designed for the brief storage of fresh food. The
freezer compartment is designed for the freezing and long-term storage of
food products.
THE MANUFACTURER GUARANTEES RELIABLE OPERATION OF THE
REFRIGERATOR WHEN THE RELATIVE AIR HUMIDITY NOT GREATER THAN
70 PER CENT AND THE AMBIENT TEMPERATURE IS:
+16 TO +32 DEGREES CELSIUS (Climate class N);
+16 TO +38 DEGREES CELSIUS (Climate class ST).
+16 TO +43 DEGREES CELSIUS (Climate class T).

4
DESCRIPTION OF THE APPLIANCE, BASIC PARTS
Model MS317-2W

A – Refrigerator compartment
B – Freezer compartment
The transparent cold section
drawer 5 moves on roller bearings
16. The drawer can be removed by
pulling it out, and lifting it off the
rails.
1 Control panel
2 On / off switch for interior light
3 Adjustable height shelves
4 Shelf for bottles
5 Cold section drawer (from -2°C to +3 °C)
6 Glass shelf
7 Fruit and vegetable boxes (2 pcs.)
8 Frozen products section(s)
9 Fast-freeze section
10 Egg tray
11 Adjustable height door trays
12 Condenser
13 Thaw water drip tray
14 Compressor

5
Model MS310-2W

A – Refrigerator compartment
B – Freezer compartment
1 Thermostat knob 9 Frozen products section(s)
2 On / off switch for interior light 10 Thaw water channel chamfer
3 Adjustable height shelves 11 Adjustable height door trays
4 Shelf for bottles 12 Egg tray
5 Glass shelf 13 Condenser
6 Fruit and vegetable boxes (2 pds.) 14 Thaw water drip tray
7 Section for small food products 15 Compressor
8 Fast-freeze section

6
INSTALLATION AND OPERATING CONDITIONS OF
THE APPLIANCE
Installation before using the appliance for the first time
It is recommended to prepare the appliance for operation with a helper.
•Remove package. Lift the appliance away from foamed polystyrene base. Tear off
adhesive tapes.
•When positioning the appliance in chosen location, it will move more easily into
position if you lift the front a little and incline it backward, allowing it to roll on its
casters. Moving or positioning the appliance do not tilt it by more than 40° from the
vertical position.
When placing, moving, lifting the appliance, do not hold the door handles,
do not pull the condenser at the rear part of the refrigerator and do not touch
the compressor unit.
•Remove all red-coloured parts from the
shelves. Tear away the adhesive tapes from
the door trays – they are intended only for
the transport of the appliance.
NOTE. When you open the freezer
compartment door a little red packing detail will fall out – IT IS FOR
TRANSPORTATION PURPOSES ONLY.
• Take two supports 1 from the bag and insert
them into the guides 2 at the top back part of the
appliance (see picture).
•If the appliance is brought in from the cold
(temperature is not higher than +12 °C), you
should wait for two hours before connecting it to the mains.
The appliance should not be connected to the mains until all packing and
transport materials aren’t removed. Suitably dispose the packaging material.
Connection to the mains
•This appliance should be connected to AC 220-240V 50Hz supply socket. The
socket must be fitted properly, and must be supplied with an earthling conduit and
a 10A fuse. It is a legal requirement that the appliance is properly earthed.
The manufacturer will not be held liable for any damage or injury which may result
from the failure to fulfil this requirement.
•Do not use adapters, multiple sockets and two-wire extension leads. If it is necessary
to use the extension lead, it must be equipped with a protection ring and a single
socket and must have a VDE/GS safety certificate.
•If an extension lead is used (with a protection ring and safety certificate), its socket
must be located at a safe distance, away from the sinks, and must not be in a place
where it could be flooded by water or waste water.
•When positioning the appliance, be careful that the electrical cord isn’t squeezed in
order to avoid its damage. Do not store heavy objects such as cooling devices,
furniture or other domestic devices next the appliance in such a way that they could
squeeze and damage the electrical cord. This can cause a short circuit and a fire.

7
•Make sure that the plug of the electrical cord is not squeezed by the back wall of the
appliance or otherwise damaged. A damaged plug can be the cause of a fire!
Positioning
•Place the appliance in a dry, well ventilated room.
WARNING! The appliance should not be operated in an unheated room or
porch. Place the appliance away from heat sources such as kitchen stove/
oven, radiators, or direct sunlight.
The rear wall of the refrigerator, in particular, the condenser and other elements of the
cooling system must not contact other elements, which may damage them, (e.g. central
heating pipes and the water supply pipes).
WARNING! The appliance must not touch any pipes for heating, gas or water
supply, or any other electrical devices.
Minimum distances from the heat sources:
-from the electric gas and other ovens - 30 mm,
-from oil or coal fired ovens - 300 mm,
-from built-in ovens - 50 mm
If there is no possibility of ensuring the above- mentioned distances, provide an
appropriate insulation board.
•Do not cover the ventilation holes at the top of the appliances – it
must be a good air circulation around the appliance. There
should be a gap of at least 10 cm between the top of the
appliance body and any furniture that may be above it (see fig.). If
this requirement is not followed, the appliance consumes more
electrical energy and its compressor may overheat. 
•The appliance must stand on a level surface and must not touch
the wall. If necessary, regulate the height of the appliance by
adjusting the levelling feet: by turning them clockwise – the front
of the appliance rises, by turning them counter clockwise – it
comes down. If the appliance is tilted slightly backward – the
doors will close by
themselves.
•◄ If the appliance is placed in a corner, a gap
must be left between the appliance body and
the wall so that the freezer compartment door
can be opened enough to pull out the frozen
product drawer (see picture).

8
ELECTRONIC CONTROL PANEL DESCRIPTION.
TEMPERATURE REGULATION.
Model MS317-2W (fig. 1)
When connecting the device to the mains for the first time, the blue temperature indicating
segment lights up at +5 (factory temperature setting +5 °C, but you can select the preferred
temperature according to your needs).

1. Temperature adjustment button is marked with the °C symbol.
Temperature setting in the refrigerator compartment
Activate temperature button 1: tap and keep until the temperature indicating segment starts to
flash in blue (active). Then release button 1 and tap repeatedly until the required temperature
segment is blue (activated). One tap changes the temperature by one position.
The temperature setting operates in a circle: for example, the active segment is at +5, and if you
want to set +9 °C after activation you have to tap temperature button 1 2 times – until the
temperature indicating segment at +9 turns blue.
Refrigerator compartment temperature is adjustable on a nine-point scale:
+9 – highest temperature (lowest cooling).
+1 – lowest temperature (highest cooling).
NOTE. After power loss the device turns on automatically, saving the last user-set temperature in
the refrigerator compartment.
THE TEMPERATURE IN THE REFRIGERATOR COMPARTMENT MAY VARY
DEPENDING ON AMBIENT TEMPERATURE, THE AMOUNT OF FOODSTUFFS, THE
TEMPERATURE OF THE FOODSTUFFS, AND HOW OFTEN THE APPLIANCE
DOORS ARE OPENED AND CLOSED. Therefore we recommend:
•locate the appliance away from heat sources,
•do not put hot foodstuffs in the refrigerator compartment – they must be cooled down to room
temperature,
•appliance door must not to be left open,
•the appliance door should not be open longer than it is necessary to take out or put in foodstuffs
IF THE REFRIGERATOR COMPARTMENT DOOR IS OPEN MORE THAN 30 SECONDS an audible
warning signal sounds, and silencing when the door is closed.

9
IF THE ROOM TEMPERATURE IS BELOW +16 °C, we recommend that you set a
lower temperature with the temperature-selection button (1).
Cooling device on/off
SHUTDOWN. Tap and hold button 1 until the three temperature indicative segments are
blue, and the light in the refrigerator compartment turns off. CAUTION! Voltage remains
turned on.
SWITCHING ON. Tap and hold button 1 until the set temperature indication segment is
blue, and the refrigerator compartment lighting is on.
NOTE: after turning on the cooling device, the last temperature set by the user will be
saved.
2. Temperature indicator segments. The temperature set-point segment is
illuminated in blue (active), while the other temperature value segments are grey
(inactive).
3. The FAST FREEZE function is activated by tapping button 3 marked with the “S“
symbol. When the FAST FREEZE function is on, the white segment in the centre of the
button is on.
We recommend using the FAST FREEZE function when you are going to freeze large
quantities of fresh food. Turn on this function 24 hours in advance. Then put the food in
the freezer compartment section marked with the symbol .
The FAST FREEZE function automatically shuts off when a temperature below –18 °C is
achieved.
Model MS310-2W (fig. 2)
The temperature in the refrigerator compartment is controlled using the thermostat
knob 1 (fig. 1) by turning it to one side or the other. The temperature indication in
digits is shown beside the thermostat knob.
The temperature is regulated on the scale of seven digits:
0 = Compressor is switched off. WARNING! Electric current is not switched off.
1 = highest temperature (lowest cooling)
7 = lowest temperature (highest cooling)
If foodstuffs in the refrigerator compartment are too cold, set the thermostat knob to 1,
2 or 3. If foodstuffs in the refrigerator compartment are not being chilled sufficiently, set
the thermostat knob to 4, 5 or 6. Please set the desired temperature in the
appliance according to your own requirements.
IF THE ROOM IS COOL, THE APPLIANCE COOLS LESS. THE TEMPERATURE
IN THE APPLIANCE MAY THEREFORE RISE. Use the thermostat wheel to set a
lower temperature.

10
USING THE REFRIGERATOR-FREEZER EFFICIENTLY
Storage zones in the refrigerator
•Due to the natural circulation of the air in the appliance, there are different
temperature zones in the refrigerator chamber.
•The coldest area is directly above the vegetables drawers. Use this area for all delicate
and highly perishable food e.g.
-Fish, meat, poultry
-Sausage products, ready meals
-Dishes or baked goods containing eggs or cream
-Fresh dough, cake mixtures
-Pre-packed vegetable and other fresh food with a label stating it should be kept at a
temperature of approx. +4 °C.
•The warmest area is in the top section of the door. Use this for storing butter and
cheese.
Food that should not be stored in a refrigerator.
Not all food is suitable for storing in the refrigerator, particularly:
-Fruit and vegetables which are sensitive to cold, such as bananas, avocado, papaya,
passion fruit, aubergines, peppers, tomatoes and cucumbers.
-Fruit which is not yet ripe
-Potatoes
•Do not keep prepared food and ready-to-cook (“heat and eat”) food in the same
container.
•Strictly observe the foodstuff validity time indicated by the manufacturer on the
product packaging.
•Store in an airtight container in the appliance any foodstuffs that have a strong odour
(e.g. fresh fish, pâté de foie gras goose liver pâté, and cheese).
•Frozen foodstuffs should be thawed in the refrigerator compartment. Food that thaws
slowly retains better flavour properties and spread cold will help to maintain the set
temperature in the refrigerator compartment.
THE TEMPERATURE IN THE REFRIGERATOR COMPARTMENT MAY
VARY DEPENDING ON AMBIENT TEMPERATURE, THE AMOUNT OF
FOODSTUFFS, THE TEMPERATURE OF THE FOODSTUFFS, AND HOW
OFTEN THE APPLIANCE DOORS ARE OPENED AND CLOSED. Therefore we
recommend:
•locate the appliance away from heat sources,
•do not put hot foodstuffs in the refrigerator compartment – they must be cooled
down to room temperature,
•appliance door must not to be left open,
•the appliance door should not be open longer than it is necessary to take out or put in
foodstuffs.
Freezing of foodstuffs
Model MS317-2W (fig. 1)
When freezing large quantities of fresh food, turn on the FAST FREEZE function 24
hours in advance – tap FAST FREEZE function button 3 marked with symbol “S“ (see
Fig. 3). The segment in the centre of the button will light.

11
The FAST FREEZE function automatically shuts off when a temperature below –18 °C is
achieved. The light goes out in the centre of the FAST FREEZE button.
Place fresh food prepared for freezing in one or two lines in the rapid freezing
compartment marked with the symbol
After 24 hours, move the frozen food products from the FAST FREEZE section into the
storage section drawer(s) (see Fig. 1).
Model MS310-2W (fig. 2)
When freezing large quantities of fresh food, the thermostat knob should be set to 7.
Place fresh food prepared for freezing in one or two lines in the rapid freezing
compartment marked with the symbol
After 24 hours the frozen food products should be replaced from the quick-
freeze section to the storage section drawer(s) (Fig. 2). When the products are
frozen, the thermostat wheel should be set at its earlier position.
•DO NOT EXCEED THE MAXIMUM AMOUNT OF FROZEN FOOD INDICATED IN THE
PRODUCTS DATA SHEET.
•Leave not less than 3 cm gap between a top of frozen products and a bottom of
drawer, which is over them.
•Do not refreeze partly thawed products.
•Do not place unwrapped foodstuffs in the freezer sections.
•Fresh food for freezing should not touch already frozen foodstuffs.
•Do not freeze foodstuffs that are warmer than the room temperature.
•WARNING! Do not freeze liquid foodstuffs in glass vessels or bottles.
•Do not consume ice made in the freezer compartment straight away.
•Products will freeze more quickly if they are divided up and packed in small portions.
•Strictly observe the frozen foodstuffs validity dates indicated by the
manufacturer on the product packaging.
WE RECOMMEND THAT FROZEN FISH AND SAUSAGE SHOULD BE STORED
IN THE FREEZER COMPARTMENT NOT LONGER THAN 6 MONTHS;
CHEESE, POULTRY, PORK, LAMB – NOT MORE THAN 8 MONTHS; BEEF,
FRUIT AND VEGETABLES – NOT LONGER THAN 12 MONTHS.

12
DEFROSTING
THE REFRIGERATOR COMPARTMENT defrosts automatically. Drops of ice that form
on the back wall of the refrigerator compartment thaw during the time the compressor
is not working and the thaw water runs down the thaw water runoff channel to the tray
on top of the compressor (Fig. 1), where it evaporates.
Model MS317-2W (fig. 1)
FREEZER COMPARTMENT of gets defrosted automatically: it operates a frost-
free cooling system (No Frost). However, according to how often the freezer door
were opened and closed, and to - how warm products were placed into the
appliance, the frost can accumulate on walls of freezer inner liner and drawers. It is
normal. But the thicker is the layer of frost, the higher is a power consumption. In
case if No Frost system had not managed to evaporate the excess moisture and
the frost layer has formed on, you should defrost the appliance. To defrost the
appliance, follow the steps in sequence:
•WARNING! Turn the appliance off and pull the plug out of the electrical socket.
•Remove foodstuffs from freezer compartment. The frozen foodstuffs will not warm up
too much while you are thawing the freezer compartment if you cover them with a
thick cloth and keep them in a cool place.
•Leave door of freezer compartment open. When the frost melts, clean and wipe dry
the surfaces and fixtures of the freezer compartment.
•Close the appliance door. Plug in and turn on the appliance.
Model MS310-2W (fig. 2)
FREEZER COMPARTMENT of should be thawed not less than twice a year or when a
layer of ice thicker than 5 mm forms in it. Do the actions below in the order they are
listed:
IMPORTANT! Turn off the appliance – unplug the power supply cord plug from the
electrical socket.
•Remove foodstuffs from freezer compartment. The frozen foodstuffs will not warm up
too much while you are thawing the freezer compartment if you cover them with a
thick cloth and keep them in a cool place.
•Remove the thaw water chamfer 10 (fig. 2), turn it 180 º and place in front of the
freezer compartment (Fig. 4). Place a bowl under the thaw water chamfer.
•Place a dish under the thaw water channel. Leave
door of freezer compartment open.
•When the ice melts, clean and wipe dry the
surfaces and fixtures of the freezer compartment.
•Remove the melt water channel, turn it by 180°
again and put it back in its original place.
•Close the appliance door. Plug in and turn on the
appliance.

13
CLEANING AND CARE
REGULARLY CLEAN THE APPLIANCE!
Note: before cleaning the cooling device and its rear compartment part, the
device must be disconnected from the mains by unplugging.
•Protect the appliance inner surfaces and plastic parts from fats, acids and sauces. In
case of accidental spills – immediately clean with warm soapy water or dishwashing
detergent. Wipe dry.
•Clean the appliance inner surfaces with warm soapy water.
Dishwashing detergent may also be used.
•Wipe dry inner and outer surfaces.
•Regularly clean the hermetic gaskets of the doors. Wipe dry.
•Regularly wash the trays and other accessories.
•◄ REGULARLY CLEAN THE THAW WATER CHANNEL SPACE
WITH A SPECIAL CLEANER FOR THAT PURPOSE (see picture).
•At least once a year clean dust away from the back part of the
appliance body and the compressor. A soft brush, electrostatic
cloth or vacuum cleaner may be used for cleaning.
•DO NOT use detergents containing abrasive particles, acid,
alcohol or benzene for cleaning the appliance inner and outer surfaces.
•DO NOT use for cleaning cloths or sponges that have coarse surfaces intended for
scrubbing.
•IF THE APPLIANCE IS TO BE LEFT SWITCHED OFF FOR AN EXTENDED PERIOD,
LEAVE ITS DOORS OPEN.
Remarks on the appliance operating noise . As the appliance
operates and goes through the freezing cycle, various noises will be emitted.
This is normal and is not a sign of any malfunction.
•As the refrigerant circulates around the refrigeration system, it causes sounds like
murmuring, bubbling, or rustling.
•Louder sounds like popping or clicking may be heard for a short time as the
refrigerator’s compressor switches on.
CHANGING THE OPENING DIRECTION OF THE DOORS
It is recommended that changing the opening direction of the doors should be done
with a helper. You will need two spanners No. 8 and No. 10 and a head screwdriver.
When changing the opening direction of the doors, YOU CAN NOT lay the
refrigerator horizontally!
Do the actions below in the order they are listed:
WARNING! Turn off the appliance and pull the plug out of the electricity supply
socket.
1. Remove the covers c from the body of the refrigerator and of the inner side of the
door. Also remove the upper bracket 6 together with the nut and washers and the
spacer under the bracket.
2. Remove the door of the refrigerator compartment 1. Remove the stopper 5 from
the bottom of it. On the other side of the door attach the stopper intended for doors
that open on the left (you will find it in the packet).

14
3. Remove the middle bracket 4 together with the washers on the axle and the plastic
spacer. Remove the freezer compartment door 3.
4. Remove the bottom cover 11 together with the small cover 10.
5. Remove the bottom bracket 2 together with the washers on the axle and the plastic
spacer. Unscrew the axle with the washers and screw it into the aperture provided
on the other side. Unscrew the bracket 7 and counterchange brackets 2 and 7.
6. Remove plugs 8 from the partition wall, separating freezer and refrigerator
compartments, and place them into holes on the opposite side.
7. Remove covers a of handle fixing screws and unscrew these screws. Transfer
handles to the other side. Impress plugs b (you‘ll find them in package) into empty
holes in doors.
8. Remove plug 9 of the freezer compartment door and impress it in the opposite side.
9. Hang the freezer compartment door 3 on the axle of bracket 2 on the opposite side
of refrigerator.
10. Turn the bracket 4 together with plastic spacer at 1800 and counterchange washers,
located on axle, on top and bottom of the bracket. Having the bracket axle placed in
door of freezer, screww it on the opposite side of refrigerator.
11. Hang the refrigerator compartment door on the axle of bracket 4.
12. Turn the bracket 6 around 180° together with the washers on the axle and the
plastic spacer. Remove the axle and the washers and reattach them on the other
side of the bracket. Having the axle of bracket 6 placed into the door of refrigerator
compartment door, screw the bracket into lower holes on the opposite side of
refrigerator. Cover the bracket and remaining empty hole with covers c.
13. Place the cover 10 to the guides of the bottom cover 11 on the opposite side and
place the bottom cover 11 in its former place.

15
OPERATION PROBLEMS AND THEIR SOLUTIONS
(TROUBLESHOOTING). What if …
•The appliance is plugged in to the mains but it does not work. Check that your house
electricity supply installations are in order. Check that the plug is correctly
inserted into the electricity supply socket.
•Model MS317-2W. Temperature segment in centre of button is red. Cooling device
is operating in emergency mode. Contact the refrigeration appliance’s
maintenance and repair company without delay.
•Model MS317-2W. Temperature cannot be set, FAST FREEZE function cannot
be activated. Close the refrigerator door, turn off the cooling device –disconnect
the power supply cord from the outlet, and wait 12 minutes. After the specified
time, plug the power cord back into the outlet and perform the required action: set
the temperature or turn on the FAST FREEZE function.
•The noise has become louder. Check that the appliance is standing stable, on a
level place. To make it level, regulate the front feet. Check if the appliance is not
touching any furniture, and that no part of the refrigeration system at the back part of
the appliance body is touching the wall. Pull the appliance away from any furniture or
walls. Check that the cause of increased noise isn’t due to bottles, cans or dishes in
the appliance that might be touching each other.
•Water has appeared at the bottom of the refrigerator compartment. Check whether
a thaw water channel space isn’t blocked. Clean the thaw water channel space
with a cleaner intended for that purpose.
•Water has appeared on the tempered glass shelves. Food items or dishes in the
refrigeration compartment are touching the back wall of the compartment. Do not let
food items or dishes touch the back wall.
•Moisture dripping from under the glass shelves. If you placed many containers with
liquids on the shelf, moisture can condense and drip onto the shelf below. Move some
containers with liquids onto other shelves.
•Water has appeared under the appliance. The thaw water collection tray has
slipped off the compressor. Place the tray on top of the compressor.
•When the appliance door is opened, the rubber sealing gasket pulls out. The gasket is
smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the groove for
it with warm water containing soap or dishwashing detergent and wipe dry. Put the
rubber sealing gasket back into the place.
•High temperature in appliance, the compressor operation pauses are short. Ascertain
whether the appliance doors are shutting tightly, whether the door wasn’t kept open
longer than necessary when taking out or putting in foodstuffs or whether a large
amount of warm food was placed in the appliance.
•The top of the appliance has condensation on it. The ambient relative air humidity
is above 70 %. Ventilate the room where the appliance stands and if possible
remove the cause of the humidity.

16
TRANSPORT
THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY DAMAGE OF
THE APPLIANCE THAT RESULTS FROM NON-COMPLIANCE WITH THE
INSTRUCTIONS FOR TRANSPORTATION.
•The appliance should be transported in the vertical position.
•When being transported, the appliance should be protected from atmospheric
conditions (rain, snow, dampness).
•The appliance should be firmly secured in place while being transported, to avoid
slippage or any shocks in the transport vehicle.
•If the appliance was transported not vertically, it may be connected to the mains after
4 hours at least. If this is not done, the appliance compressor may fail.
ENVIRONMENTAL PROTECTION
Ozone layer protection
The refrigerants and foaming agents, which are 100% free of FCKW and FKW have
been used for manufacturing our product. Therefore we are helping to protect the
ozone layer and prevent the increase of greenhouse effects. Also, the innovative
technology and environmentally friendly insulation help in reducing energy
consumption.
Recycling of the packaging
Our packaging are made of environmentally friendly materials, which can be reused:
•The external packaging is made of cardboard/foil;
•The FCKW free shape of foamed polystyrene (PS);
•Polyethylene (PE) foils and bags.
ELIMINATION / DISPOSAL OF THE EQUIPMENT
If the appliance is no longer in use, cut the connecting cable off the used
equipment before its scrapping. Also, remove the appliance lock or render it
useless so that the appliance presents no danger to children while being
stored for disposal. This appliance is marked with a symbol of the crossed out
waste container in conformance with the European Directive 2002/96/EC.
Such
marking informs that the equipment may not be kept together with other waste coming
from the household after the period of its use. The user is obliged to dispose of the
appliance at the waste collection point. The local waste collection points, shops
and communal units form an appropriate system enabling the disposal of the equipment.
Handling the used electrical and electronic equipment properly contributes to
the avoidance of consequences harmful to the human health and natural
environment, resulting from the presence of hazardous substances and improper
storage and processing of such equipment.
Manufacturer’s Declaration
The manufacturer hereby declares that this product meets the requirements of the
following European directives: Low Voltage Directive 2014/35/EC; Electromagnetic
Compatibility (EMC) Directive 2014/30/EC; ErP Directive 2009/125/EC and has thus
been marked with the symbol and been issued with a declaration of compliance made
available to market regulators.

17
PRODUCT FICHE
NOTE. The manufacturer reserves the right to make future changes to technical parameters and
specifications.
¹)
1 = Refrigerator with one or more fresh-food storage compartments,
2 = Refrigerator-cellar, Cellar and Wine storage appliances,
3 = Refrigerator-chiller and Refrigerator with a 0-star compartment,
4 = Refrigerator with a one-star compartment, 5 = Refrigerator with a two-star compartment,
6 = Refrigerator with a three-star compartment, 7 = Refrigerator-freezer,
8 = Upright freezer, 9 = Chest freezer, 10 = Multi-use and other refrigerating appliances
²)
A+++ (most efficient) to D (least efficient)
³)
Annual energy consumption (AE C ) in kWh per year, based on standard test results for 24 hours.
Actual energy consumption will depend on how the appliance is used and where it is located.
4)
1 One-star compartment with nominal temperature of -6°C
2 Two-star compartment with nominal temperature of -12°C
3 Three-star compartment with nominal temperature of -18°C
4 Food freezer compartment (four-star compartment) with nominal temperature of -18°C
⁵)
Climate class: This appliance is intended to be used at an ambient temperature between lowest and
highest temperature: SN = 10°C-32°C, N = 16°C-32°C, ST = 16°C-38°C, T = 16°C-43°C
Model
MS310-2W
MS317-2W
Category ¹
7 - Refrigerator-freezer
Fridge net volume, L
191
208
Cold section net volume, L
-
21
Freezer net volume, L
119
74
Actual consumption will depend on how the appliance is used and where it is located
Energy efficiency class ²
A++
A+
Annual energy consumption ³, kWh/year
223
301
Climate class 5
N-ST
N-ST
Frost-free system
No
Yes
Star marking of frozen-food storage
compartments 4
*/ ***
Freezing capacity, kg / 24 h
8
6
Temperature rise time, h
20
15
Height / width / depth of product, cm
194,5 / 60 / 65
194,5 / 60 /62
Noise level, dB(A) re1pW
41
Construction
Freestanding
Electrical Data: see in the product label