MooJiang ALKAID User manual

破军
单边游戏手柄
用户手册
www.imoojiang.com
[User Manual]
One-handed Bluetooth Game Controller
ALKAID

AB
LB2键
LB1键
摇杆/L3键（摇杆下压）
A键
B键
充电指示灯
HOME键
电源开关
模式指示灯
充电口
锁扣键
LT键
M1键(背键)
激活线（用于安卓激活）

AB
AB
71.2 mm
85.6 mm
包装清单：手柄、Type-C充电线、用户手册

：下载安装墨将APP
扫描二维码
下载安装墨将助手app
或www.imoojiang.com/Download/download.html访问下载
1
打开手机蓝牙
2
手柄使用向导
打开手柄电源开关
3
AB

• 已配对的手柄，在蓝牙信号范围内，下次可以自动连接
• 若要将手柄连接至另一台设备，请先关闭当前设备的电源开关，再用另
一台设备搜索配对手柄即可
如果因为手机系统兼容问题，
自动连接不成功,
请在“手机-设置-蓝牙-Alkaid”连接
请保持在APP打开状态，执行以下步骤
由于系统原因
“墨将助手”APP内，选择设备类型
4
点击立即连接，即可连接成功
Android需先执行步骤 激活映射
iOS无需激活,跳至步骤
5
6
7

如果遇到问题，请在网上查到自己手机的打开方式
若手机仅有Micro USB接口，则需要自行购置Type-C转Micro USB的转接头。
*建议取出手机壳再进行激活（手机壳可能导致激活口接触不良）
1. 拔出手柄下方激活线，插入Android手机
：Android用户需要激活按键映射
6
IOS用户请忽略此步骤
2. 出现类似USB调试弹窗，
请勾选后，点击 确认
在“设置”中开启开发者选项，并打开USB调试等相关设置
AB
一律允许这台电脑
取消 确认
这台电脑的RSA:
24:0E:D1:69:41:C8:F4:28:51:92:76:4E:**:*
*:**:**
激活后，手机关机或重启后将重置状态，则需要重新激活；
映射掉后（已激活成功后，仍提示未激活），请在“墨将助手-首页-立即激活”
中激活

1.向下拨动锁扣键，弹出拉杆
2.放入手机后，将压杆压到与手机侧面贴合即可
向下拨动
:手柄的安装
7
Android和iOS通用步骤
按压至夹紧
AB

手柄基本操作与指示说明
开关机
模式切换
蓝牙配对
向下拨动电源按钮
向上拨动电源按钮
长按HOME键切换键3秒
指示灯（红）闪烁，为蓝牙原生模式
指示灯（绿）闪烁，为蓝牙安卓模式
指示灯（蓝）闪烁，为蓝牙iOS模式
指示灯闪烁/常亮，手柄开机
指示灯关闭，手柄关机
选择对应模式连接
蓝牙重连
重置连接
已配对手机再次使用，开启电源
会自动连接
连接成功后，指示灯常亮
指示灯闪烁，蓝牙自动断连长按B键+HOME键3秒
低电量提示 低电量指示灯快闪低电提示后能用30分钟
休眠 所有指示灯熄灭，任意键唤醒
1.手柄开机后无连接3分钟后自
动睡眠
2.手柄连接后5分钟无操作自动
进入睡眠
适用手机： Android6.0以上 / iPhone6S以上，iOS11.0以上
蓝牙版本： 4.2
手柄尺寸： 74*86*36mm
电池容量： 340mAh
充电时间： 1小时左右
产品重量： 约70g
使用温度： 0℃~40℃
充电
充电指示灯红色慢闪
充电指示灯绿色常亮
插入Type C口充电线
充电完成

AB
LB2
LB1
Joystick
A
B
Indictor light
A/I mode key
Power
Mode indicator
Charging
LOCK
LT
M
Activation Cable
(Used for Android)

PACKING:GAMEPAD、USB CABLE、USER MANUAL
AB
85.6 mm
AB
71.2 mm

Download MooJiang APP
Link: www.imoojiang.com/Download/download.html
1
Turn on Bluetooth
2
Turn on the
3
AB
Instructions:
Scan QR code and download
APP
MooJiang
power

• The controller connected successfully can be connected automati-
cally
• If you need to connect another controller, you need to power off
the current device
If the automatic connection is not
successful, Please connect in
"Settings-Bluetooth-MJ-Alkaid"
Please keep the app open
System cause
Open app, click
4
Click
Android user should activate key mapping, Refer to Step
IOS user please ignore this step
5
6
MooJiang
Connect Now
Alkaid

If any problem, pls check your phone operation mode via website.
If the phone is with Micro USB interface only, you need to purchase the
adapter from type-C to micro USB.
Suggest to activate the phone without case ( the phone case may cause
poor contact of the activation port )
1. Unplug the activation cable under the game pad and plug it into the
Android phone.
Android user should activate key mapping
6
IOS user please ignore this step
2. Similar USB debugging
pop-up window appears.
Please check it and click OK
Click ’Developer option’ in ‘Settings’, then click ‘USB debugging’ to
setting.
AB
After activation, it should be reset and activation if phone power off or
restart.
After mapping (success activating , but remind not),please activate
from “Moojiang App- front page - activate immediately ”
Always allow this computer
NO YES
This computer RSA:
24:0E:D1:69:41:C8:F4:28:51:92:76:4E:**:*
*:**:**
Allow USB debugging

Instructions:
Turn on/Off
Mode switch
Bluetooth
connect
Toggle the power button down
Toggle the power button up
long press Home for 3 seconds
·LED(red) flashes,
controller is under standard mode
·LED(green) flashes,
controller is under Android mode
·LED(blue) flashes,
controller is under IOS mode
The indicator light flashes/steady light,
the handle is turned on
he indicator light is off, the handle is off
Select the corresponding mode
to connect(Android/IOS)
Can be used for 30 minutes
after low battery reminding
Bluetooth
reconnect
Reset
connection
Low battery
reminding
Charging
Sleep mode
The controller will be connected
automatically for paired phone
when the controller is turned on
LED is always on after successful con-
nection between controller and
mobile phone
the indicator light flashes and Blue-
tooth automatically disconnects
The indicator light flashes quickly
when Low battery
The charging indicator(red) flashes
slowly
The charging indicator(green) is
always on
Long press Home+B for 3 seconds
Press any key to wake up the sleep
mode when all the indicator lighters
are off.
1.The controller automatically
goes to sleep mode without any
connection within 3 minutes.
2.The controller automatically
goes to sleep mode without any
operation after connecting within
5 minutes.
Android6.or above/iPhone6S or above/i0S11.0 or above
4.2
74*86*36mm
340mAh
About 1 hour
70g
0°C-40°C
Application:
Bluetooth version:
Size:
Battery capacity:
Charging time:
Weight:
Temperature:
Insert Type C for charging
Finished charging