Introduction
Congratulations on choosing the Gamester
Vortex, the ultimate gamepad officially licensed
for the Xbox video game system.
Contents
1 x Gamepad
1 x Instruction Manual
IMPORTANT !
Before using this product, read the Xbox
Instruction Manual for safety, health and other
information.
Product Features
1. Six action buttons offering eight-bit analog
control (A, B, X,Y, Black and White).
2. Two triggers offering eight-bit analog
control.
3. Two vibration feedback motors, one for low
frequency forces, one for high frequency
forces.
4. Two analog thumbsticks with integral
momentary switches.
5. One eight-way digital directional pad.
6. Two digital menu navigation buttons (Back
and Start).
7. Two module expansion slots (Expansion
slot A and Expansion slot B).
8. Xbox proprietary plug interface.
9. Inline Quick Release Connector.
10.Rubber coated handle grips.
Inline Quick Release Connector
The Inline Quick Release Connector is added
to help protect your Xbox game console
investment. It is designed to disconnect your
gamepad from your console in the event that
the gamepad is pulled upon with an
unreasonable force.
During normal use, the Inline Quick Release
Connector should always remain connected.
Always use the console connector to
disconnect the controller from the console.
Expansion Slots
The expansion slots are an integral part of
your gamepad and are designed to add
functionality and variety to your gaming
experience.
Expansion Slot A (Upper slot). Supports the
following modules: 8 MB Memory Unit, 16 MB
Memory Unit and all future Xbox modules
designed for use in Slot A.
Expansion Slot B (Lower slot). Supports the
following modules: 8 MB Memory Unit, 16 MB
Memory Unit and all future Xbox modules
designed for use in Slot B.
TROUBLESHOOTING
The gamepad is not working.
• Make sure the gamepad connector plug is
firmly connected to the Xbox controller port.
• Make sure the Inline Quick Release
Connector is firmly connected.
• Reset your Xbox game console.
MAINTENANCE
• Handle this product carefully.
• Store this product away from dusty or dirty
areas.
• Keep this product away from moisture or
temperature extremes.
• Do not disassemble this product. If a
problem occurs, consult your warranty card
for replacement instructions.
Please retain this for future reference.
Expansion slot A Expansion slot B
Start
button
Back
button
Right
thumb
stick
Directional
Pad
White button
Black button
Left
thumb
stick
Y button
B button
X button
A button
Right
trigger
Left
trigger
