MOQI i7 User manual

User Manual
Indicator Light
Rear Camera
MIC
Gently press on “OPEN” and move upwards to open the SIM
cover. Unlock the SIM socket, and open the SIM cover.
Put the SIM card into the card socket, with metal contact
surface facing downwards and the bevel angle of SIM card
corresponding to the bevel angle of the socket, and then
cover the SIM cover.
Gently push in the “LOCK” direction to lock the SIM cover.
Ensure the SIM cover is pushed to the bottom.
Tips:
1. The mobile phone supports dual-Nano-SIM card with a
dimension of 12mm*9mm. Don’t use the non-standard card or
the hand-cut card.
2. After the SIM card is installed, the mobile phone should be
restarted to make the SIM card recognized by the system.
MOQI Mobile Phone Menu will automatically hide after the app
is launched. The user can invoke the menu by sliding from
bottom (or from right in case of landscape mode). The menu
contains the hide, back, home and menu buttons.
In order to better support the mobile game operation, MOQI
Mobile Phone is inbuilt with MOQI Assistant, which provides
keymap, one-click skill, one-click macro, and game auxiliary
message notification. The user can click on MOQI Assistant
floating window to set the keymap operations.
Keymap switch:
Open or close the keymap. After the keymap is turned off, the
original handle key function will be resumed. Please refer to
the attached list for the button value.
Directional skill switch:
After the switch is turned on, press on the button to release
the skill. Use the right rocking bar to adjust the skill release
direction. You can then release skill at desired direction by
releasing the key. MOQI Mobile Phone Button supports
correlated directional skill.
Button tip:
After the button tip is enabled, the set buttons will be displayed
on the screen. When it is turned off, the display disappears.
Operation tip:
After the operation tip is enabled, MOQI Assistant will be start-
ed as well. The user can operate according to the guides.
When it is turned off, the display disappears.
1.Button configurations
MOQI Mobile Phone has provided different official button config-
uration plans for different games or different roles in the same
game. These configurations are available upon the start of
game. The user can add or delete different button configura-
tions based on their use habits. The user can also share
button configurations with others or use others’ configurations.
Button (Single button and combined buttons):
MOQI Mobile Phone support up to ten single button settings
for game skills.
In order to introduce more available buttons, the user can
define new buttons by combining any two buttons. When
assigning button value on the keymap, the user can press on
two buttons within 30ms to generate a new button. Up to 43
combined buttons can be set.
* All the above 53 single buttons or combined buttons are
collectively called buttons.
When playing a game, user can operate the single button or
the combined button, or trigger another combined button within
1s after pressing the first combined button. (Take two
combined buttons, “L+Sun” and “L+Moon” , for example,
within 1S after pressing the first combined button, “L+Sun” ,
the user can swift between different skills by pressing “Sun”
and “Moon” buttons repeatedly. )
2.One-key skill
MOQI Assistant provides the user with a launch button which
allow user to trigger a combination of multiple skills. The user
can modify and set the skill release interval and combination
at his discretion.
3.One-key macro
MOQI Assistant sets a macro button for the user, which can
realize the release of different skills one by one. After finishing
the one-key Macro settings, the user can press on the macro
button one by one to trigger different skills in sequence. If the
macro button is not pressed on for more than 5S, the one-key
macro function will automatically be interrupted. The macro
button functions will start from the first skill. The user can
modify and set the one-key macro at his discretion.
* The time is set to 10ms. To set the time interval more precisely,
the coordinate axis adopts unequal intervals. When the numerical
value is small, a larger proportional scale should be used.
Left Speaker
Battery cover
opening position
Camera Flash
Right Speaker
i7 PRODUCT SPECIFICATIONS MENU
MOQI service Wechat
MOQI website：
www.imuch.com
MOQI QQ group
MOQI BBS：
bbs.imuch.com
MOQI Weibo
Service hotline：
4006-61-00-61
MOQI ASSISTANT
Product Drawing
1
SIM card installation
2
1
2
3
杭州瑞高智能设备有限公司
型号：I7
TD-LTE数字移动电话机
CMIIT ID:
IMEI：
Nano
SIM
1
Nano
SIM
2
Before using the product, please carefully read the User Manual.
To get more information about our products and our company,
please login：www.imuch.com
or call our service hotline：[phone]
Power Key
Front Camera
L-3d Joystick
Cross Key
Receiver
Light Sen Sor
And ProximitySensor
Volume Key
Mountain(X) Key
Water(Y) Key
Moon(B) Key
Sun(A) Key
R-3d Joystick
Type C USB
Head Phone
R
L

User Manual
Indicator Light
Rear Camera
MIC
Gently press on “OPEN” and move upwards to open the SIM
cover. Unlock the SIM socket, and open the SIM cover.
Put the SIM card into the card socket, with metal contact
surface facing downwards and the bevel angle of SIM card
corresponding to the bevel angle of the socket, and then
cover the SIM cover.
Gently push in the “LOCK” direction to lock the SIM cover.
Ensure the SIM cover is pushed to the bottom.
Tips:
1. The mobile phone supports dual-Nano-SIM card with a
dimension of 12mm*9mm. Don’t use the non-standard card or
the hand-cut card.
2. After the SIM card is installed, the mobile phone should be
restarted to make the SIM card recognized by the system.
MOQI Mobile Phone Menu will automatically hide after the app
is launched. The user can invoke the menu by sliding from
bottom (or from right in case of landscape mode). The menu
contains the hide, back, home and menu buttons.
In order to better support the mobile game operation, MOQI
Mobile Phone is inbuilt with MOQI Assistant, which provides
keymap, one-click skill, one-click macro, and game auxiliary
message notification. The user can click on MOQI Assistant
floating window to set the keymap operations.
Keymap switch:
Open or close the keymap. After the keymap is turned off, the
original handle key function will be resumed. Please refer to
the attached list for the button value.
Directional skill switch:
After the switch is turned on, press on the button to release
the skill. Use the right rocking bar to adjust the skill release
direction. You can then release skill at desired direction by
releasing the key. MOQI Mobile Phone Button supports
correlated directional skill.
Button tip:
After the button tip is enabled, the set buttons will be displayed
on the screen. When it is turned off, the display disappears.
Operation tip:
After the operation tip is enabled, MOQI Assistant will be start-
ed as well. The user can operate according to the guides.
When it is turned off, the display disappears.
1.Button configurations
MOQI Mobile Phone has provided different official button config-
uration plans for different games or different roles in the same
game. These configurations are available upon the start of
game. The user can add or delete different button configura-
tions based on their use habits. The user can also share
button configurations with others or use others’ configurations.
Button (Single button and combined buttons):
MOQI Mobile Phone support up to ten single button settings
for game skills.
In order to introduce more available buttons, the user can
define new buttons by combining any two buttons. When
assigning button value on the keymap, the user can press on
two buttons within 30ms to generate a new button. Up to 43
combined buttons can be set.
* All the above 53 single buttons or combined buttons are
collectively called buttons.
When playing a game, user can operate the single button or
the combined button, or trigger another combined button within
1s after pressing the first combined button. (Take two
combined buttons, “L+Sun” and “L+Moon” , for example,
within 1S after pressing the first combined button, “L+Sun” ,
the user can swift between different skills by pressing “Sun”
and “Moon” buttons repeatedly. )
2.One-key skill
MOQI Assistant provides the user with a launch button which
allow user to trigger a combination of multiple skills. The user
can modify and set the skill release interval and combination
at his discretion.
3.One-key macro
MOQI Assistant sets a macro button for the user, which can
realize the release of different skills one by one. After finishing
the one-key Macro settings, the user can press on the macro
button one by one to trigger different skills in sequence. If the
macro button is not pressed on for more than 5S, the one-key
macro function will automatically be interrupted. The macro
button functions will start from the first skill. The user can
modify and set the one-key macro at his discretion.
* The time is set to 10ms. To set the time interval more precisely,
the coordinate axis adopts unequal intervals. When the numerical
value is small, a larger proportional scale should be used.
Left Speaker
Battery cover
opening position
Camera Flash
Right Speaker
i7 PRODUCT SPECIFICATIONS MENU
MOQI service Wechat
MOQI website：
www.imuch.com
MOQI QQ group
MOQI BBS：
bbs.imuch.com
MOQI Weibo
Service hotline：
4006-61-00-61
MOQI ASSISTANT
Product Drawing
1
SIM card installation
2
1
2
3
杭州瑞高智能设备有限公司
型号：I7
TD-LTE数字移动电话机
CMIIT ID:
IMEI：
Nano
SIM
1
Nano
SIM
2
Before using the product, please carefully read the User Manual.
To get more information about our products and our company,
please login：www.imuch.com
or call our service hotline：[phone]
Power Key
Front Camera
L-3d Joystick
Cross Key
Receiver
Light Sen Sor
And ProximitySensor
Volume Key
Mountain(X) Key
Water(Y) Key
Moon(B) Key
Sun(A) Key
R-3d Joystick
Type C USB
Head Phone
R
L

User Manual
Indicator Light
Rear Camera
MIC
Gently press on “OPEN” and move upwards to open the SIM
cover. Unlock the SIM socket, and open the SIM cover.
Put the SIM card into the card socket, with metal contact
surface facing downwards and the bevel angle of SIM card
corresponding to the bevel angle of the socket, and then
cover the SIM cover.
Gently push in the “LOCK” direction to lock the SIM cover.
Ensure the SIM cover is pushed to the bottom.
Tips:
1. The mobile phone supports dual-Nano-SIM card with a
dimension of 12mm*9mm. Don’t use the non-standard card or
the hand-cut card.
2. After the SIM card is installed, the mobile phone should be
restarted to make the SIM card recognized by the system.
MOQI Mobile Phone Menu will automatically hide after the app
is launched. The user can invoke the menu by sliding from
bottom (or from right in case of landscape mode). The menu
contains the hide, back, home and menu buttons.
In order to better support the mobile game operation, MOQI
Mobile Phone is inbuilt with MOQI Assistant, which provides
keymap, one-click skill, one-click macro, and game auxiliary
message notification. The user can click on MOQI Assistant
floating window to set the keymap operations.
Keymap switch:
Open or close the keymap. After the keymap is turned off, the
original handle key function will be resumed. Please refer to
the attached list for the button value.
Directional skill switch:
After the switch is turned on, press on the button to release
the skill. Use the right rocking bar to adjust the skill release
direction. You can then release skill at desired direction by
releasing the key. MOQI Mobile Phone Button supports
correlated directional skill.
Button tip:
After the button tip is enabled, the set buttons will be displayed
on the screen. When it is turned off, the display disappears.
Operation tip:
After the operation tip is enabled, MOQI Assistant will be start-
ed as well. The user can operate according to the guides.
When it is turned off, the display disappears.
1.Button configurations
MOQI Mobile Phone has provided different official button config-
uration plans for different games or different roles in the same
game. These configurations are available upon the start of
game. The user can add or delete different button configura-
tions based on their use habits. The user can also share
button configurations with others or use others’ configurations.
Button (Single button and combined buttons):
MOQI Mobile Phone support up to ten single button settings
for game skills.
In order to introduce more available buttons, the user can
define new buttons by combining any two buttons. When
assigning button value on the keymap, the user can press on
two buttons within 30ms to generate a new button. Up to 43
combined buttons can be set.
* All the above 53 single buttons or combined buttons are
collectively called buttons.
When playing a game, user can operate the single button or
the combined button, or trigger another combined button within
1s after pressing the first combined button. (Take two
combined buttons, “L+Sun” and “L+Moon” , for example,
within 1S after pressing the first combined button, “L+Sun” ,
the user can swift between different skills by pressing “Sun”
and “Moon” buttons repeatedly. )
2.One-key skill
MOQI Assistant provides the user with a launch button which
allow user to trigger a combination of multiple skills. The user
can modify and set the skill release interval and combination
at his discretion.
3.One-key macro
MOQI Assistant sets a macro button for the user, which can
realize the release of different skills one by one. After finishing
the one-key Macro settings, the user can press on the macro
button one by one to trigger different skills in sequence. If the
macro button is not pressed on for more than 5S, the one-key
macro function will automatically be interrupted. The macro
button functions will start from the first skill. The user can
modify and set the one-key macro at his discretion.
* The time is set to 10ms. To set the time interval more precisely,
the coordinate axis adopts unequal intervals. When the numerical
value is small, a larger proportional scale should be used.
Left Speaker
Battery cover
opening position
Camera Flash
Right Speaker
i7 PRODUCT SPECIFICATIONS MENU
MOQI service Wechat
MOQI website：
www.imuch.com
MOQI QQ group
MOQI BBS：
bbs.imuch.com
MOQI Weibo
Service hotline：
4006-61-00-61
MOQI ASSISTANT
Product Drawing
1
SIM card installation
2
1
2
3
杭州瑞高智能设备有限公司
型号：I7
TD-LTE数字移动电话机
CMIIT ID:
IMEI：
Nano
SIM
1
Nano
SIM
2
Before using the product, please carefully read the User Manual.
To get more information about our products and our company,
please login：www.imuch.com
or call our service hotline：[phone]
Power Key
Front Camera
L-3d Joystick
Cross Key
Receiver
Light Sen Sor
And ProximitySensor
Volume Key
Mountain(X) Key
Water(Y) Key
Moon(B) Key
Sun(A) Key
R-3d Joystick
Type C USB
Head Phone
R
L

User Manual
Indicator Light
Rear Camera
MIC
Gently press on “OPEN” and move upwards to open the SIM
cover. Unlock the SIM socket, and open the SIM cover.
Put the SIM card into the card socket, with metal contact
surface facing downwards and the bevel angle of SIM card
corresponding to the bevel angle of the socket, and then
cover the SIM cover.
Gently push in the “LOCK” direction to lock the SIM cover.
Ensure the SIM cover is pushed to the bottom.
Tips:
1. The mobile phone supports dual-Nano-SIM card with a
dimension of 12mm*9mm. Don’t use the non-standard card or
the hand-cut card.
2. After the SIM card is installed, the mobile phone should be
restarted to make the SIM card recognized by the system.
MOQI Mobile Phone Menu will automatically hide after the app
is launched. The user can invoke the menu by sliding from
bottom (or from right in case of landscape mode). The menu
contains the hide, back, home and menu buttons.
In order to better support the mobile game operation, MOQI
Mobile Phone is inbuilt with MOQI Assistant, which provides
keymap, one-click skill, one-click macro, and game auxiliary
message notification. The user can click on MOQI Assistant
floating window to set the keymap operations.
Keymap switch:
Open or close the keymap. After the keymap is turned off, the
original handle key function will be resumed. Please refer to
the attached list for the button value.
Directional skill switch:
After the switch is turned on, press on the button to release
the skill. Use the right rocking bar to adjust the skill release
direction. You can then release skill at desired direction by
releasing the key. MOQI Mobile Phone Button supports
correlated directional skill.
Button tip:
After the button tip is enabled, the set buttons will be displayed
on the screen. When it is turned off, the display disappears.
Operation tip:
After the operation tip is enabled, MOQI Assistant will be start-
ed as well. The user can operate according to the guides.
When it is turned off, the display disappears.
1.Button configurations
MOQI Mobile Phone has provided different official button config-
uration plans for different games or different roles in the same
game. These configurations are available upon the start of
game. The user can add or delete different button configura-
tions based on their use habits. The user can also share
button configurations with others or use others’ configurations.
Button (Single button and combined buttons):
MOQI Mobile Phone support up to ten single button settings
for game skills.
In order to introduce more available buttons, the user can
define new buttons by combining any two buttons. When
assigning button value on the keymap, the user can press on
two buttons within 30ms to generate a new button. Up to 43
combined buttons can be set.
* All the above 53 single buttons or combined buttons are
collectively called buttons.
When playing a game, user can operate the single button or
the combined button, or trigger another combined button within
1s after pressing the first combined button. (Take two
combined buttons, “L+Sun” and “L+Moon” , for example,
within 1S after pressing the first combined button, “L+Sun” ,
the user can swift between different skills by pressing “Sun”
and “Moon” buttons repeatedly. )
2.One-key skill
MOQI Assistant provides the user with a launch button which
allow user to trigger a combination of multiple skills. The user
can modify and set the skill release interval and combination
at his discretion.
3.One-key macro
MOQI Assistant sets a macro button for the user, which can
realize the release of different skills one by one. After finishing
the one-key Macro settings, the user can press on the macro
button one by one to trigger different skills in sequence. If the
macro button is not pressed on for more than 5S, the one-key
macro function will automatically be interrupted. The macro
button functions will start from the first skill. The user can
modify and set the one-key macro at his discretion.
* The time is set to 10ms. To set the time interval more precisely,
the coordinate axis adopts unequal intervals. When the numerical
value is small, a larger proportional scale should be used.
Left Speaker
Battery cover
opening position
Camera Flash
Right Speaker
i7 PRODUCT SPECIFICATIONS MENU
MOQI service Wechat
MOQI website：
www.imuch.com
MOQI QQ group
MOQI BBS：
bbs.imuch.com
MOQI Weibo
Service hotline：
4006-61-00-61
MOQI ASSISTANT
Product Drawing
1
SIM card installation
2
1
2
3
杭州瑞高智能设备有限公司
型号：I7
TD-LTE数字移动电话机
CMIIT ID:
IMEI：
Nano
SIM
1
Nano
SIM
2
Before using the product, please carefully read the User Manual.
To get more information about our products and our company,
please login：www.imuch.com
or call our service hotline：[phone]
Power Key
Front Camera
L-3d Joystick
Cross Key
Receiver
Light Sen Sor
And ProximitySensor
Volume Key
Mountain(X) Key
Water(Y) Key
Moon(B) Key
Sun(A) Key
R-3d Joystick
Type C USB
Head Phone
R
L

User Manual
Indicator Light
Rear Camera
MIC
Gently press on “OPEN” and move upwards to open the SIM
cover. Unlock the SIM socket, and open the SIM cover.
Put the SIM card into the card socket, with metal contact
surface facing downwards and the bevel angle of SIM card
corresponding to the bevel angle of the socket, and then
cover the SIM cover.
Gently push in the “LOCK” direction to lock the SIM cover.
Ensure the SIM cover is pushed to the bottom.
Tips:
1. The mobile phone supports dual-Nano-SIM card with a
dimension of 12mm*9mm. Don’t use the non-standard card or
the hand-cut card.
2. After the SIM card is installed, the mobile phone should be
restarted to make the SIM card recognized by the system.
MOQI Mobile Phone Menu will automatically hide after the app
is launched. The user can invoke the menu by sliding from
bottom (or from right in case of landscape mode). The menu
contains the hide, back, home and menu buttons.
In order to better support the mobile game operation, MOQI
Mobile Phone is inbuilt with MOQI Assistant, which provides
keymap, one-click skill, one-click macro, and game auxiliary
message notification. The user can click on MOQI Assistant
floating window to set the keymap operations.
Keymap switch:
Open or close the keymap. After the keymap is turned off, the
original handle key function will be resumed. Please refer to
the attached list for the button value.
Directional skill switch:
After the switch is turned on, press on the button to release
the skill. Use the right rocking bar to adjust the skill release
direction. You can then release skill at desired direction by
releasing the key. MOQI Mobile Phone Button supports
correlated directional skill.
Button tip:
After the button tip is enabled, the set buttons will be displayed
on the screen. When it is turned off, the display disappears.
Operation tip:
After the operation tip is enabled, MOQI Assistant will be start-
ed as well. The user can operate according to the guides.
When it is turned off, the display disappears.
1.Button configurations
MOQI Mobile Phone has provided different official button config-
uration plans for different games or different roles in the same
game. These configurations are available upon the start of
game. The user can add or delete different button configura-
tions based on their use habits. The user can also share
button configurations with others or use others’ configurations.
Button (Single button and combined buttons):
MOQI Mobile Phone support up to ten single button settings
for game skills.
In order to introduce more available buttons, the user can
define new buttons by combining any two buttons. When
assigning button value on the keymap, the user can press on
two buttons within 30ms to generate a new button. Up to 43
combined buttons can be set.
* All the above 53 single buttons or combined buttons are
collectively called buttons.
When playing a game, user can operate the single button or
the combined button, or trigger another combined button within
1s after pressing the first combined button. (Take two
combined buttons, “L+Sun” and “L+Moon” , for example,
within 1S after pressing the first combined button, “L+Sun” ,
the user can swift between different skills by pressing “Sun”
and “Moon” buttons repeatedly. )
2.One-key skill
MOQI Assistant provides the user with a launch button which
allow user to trigger a combination of multiple skills. The user
can modify and set the skill release interval and combination
at his discretion.
3.One-key macro
MOQI Assistant sets a macro button for the user, which can
realize the release of different skills one by one. After finishing
the one-key Macro settings, the user can press on the macro
button one by one to trigger different skills in sequence. If the
macro button is not pressed on for more than 5S, the one-key
macro function will automatically be interrupted. The macro
button functions will start from the first skill. The user can
modify and set the one-key macro at his discretion.
* The time is set to 10ms. To set the time interval more precisely,
the coordinate axis adopts unequal intervals. When the numerical
value is small, a larger proportional scale should be used.
Left Speaker
Battery cover
opening position
Camera Flash
Right Speaker
i7 PRODUCT SPECIFICATIONS MENU
MOQI service Wechat
MOQI website：
www.imuch.com
MOQI QQ group
MOQI BBS：
bbs.imuch.com
MOQI Weibo
Service hotline：
4006-61-00-61
MOQI ASSISTANT
Product Drawing
1
SIM card installation
2
1
2
3
杭州瑞高智能设备有限公司
型号：I7
TD-LTE数字移动电话机
CMIIT ID:
IMEI：
Nano
SIM
1
Nano
SIM
2
Before using the product, please carefully read the User Manual.
To get more information about our products and our company,
please login：www.imuch.com
or call our service hotline：[phone]
Power Key
Front Camera
L-3d Joystick
Cross Key
Receiver
Light Sen Sor
And ProximitySensor
Volume Key
Mountain(X) Key
Water(Y) Key
Moon(B) Key
Sun(A) Key
R-3d Joystick
Type C USB
Head Phone
R
L

User Manual
Indicator Light
Rear Camera
MIC
Gently press on “OPEN” and move upwards to open the SIM
cover. Unlock the SIM socket, and open the SIM cover.
Put the SIM card into the card socket, with metal contact
surface facing downwards and the bevel angle of SIM card
corresponding to the bevel angle of the socket, and then
cover the SIM cover.
Gently push in the “LOCK” direction to lock the SIM cover.
Ensure the SIM cover is pushed to the bottom.
Tips:
1. The mobile phone supports dual-Nano-SIM card with a
dimension of 12mm*9mm. Don’t use the non-standard card or
the hand-cut card.
2. After the SIM card is installed, the mobile phone should be
restarted to make the SIM card recognized by the system.
MOQI Mobile Phone Menu will automatically hide after the app
is launched. The user can invoke the menu by sliding from
bottom (or from right in case of landscape mode). The menu
contains the hide, back, home and menu buttons.
In order to better support the mobile game operation, MOQI
Mobile Phone is inbuilt with MOQI Assistant, which provides
keymap, one-click skill, one-click macro, and game auxiliary
message notification. The user can click on MOQI Assistant
floating window to set the keymap operations.
Keymap switch:
Open or close the keymap. After the keymap is turned off, the
original handle key function will be resumed. Please refer to
the attached list for the button value.
Directional skill switch:
After the switch is turned on, press on the button to release
the skill. Use the right rocking bar to adjust the skill release
direction. You can then release skill at desired direction by
releasing the key. MOQI Mobile Phone Button supports
correlated directional skill.
Button tip:
After the button tip is enabled, the set buttons will be displayed
on the screen. When it is turned off, the display disappears.
Operation tip:
After the operation tip is enabled, MOQI Assistant will be start-
ed as well. The user can operate according to the guides.
When it is turned off, the display disappears.
1.Button configurations
MOQI Mobile Phone has provided different official button config-
uration plans for different games or different roles in the same
game. These configurations are available upon the start of
game. The user can add or delete different button configura-
tions based on their use habits. The user can also share
button configurations with others or use others’ configurations.
Button (Single button and combined buttons):
MOQI Mobile Phone support up to ten single button settings
for game skills.
In order to introduce more available buttons, the user can
define new buttons by combining any two buttons. When
assigning button value on the keymap, the user can press on
two buttons within 30ms to generate a new button. Up to 43
combined buttons can be set.
* All the above 53 single buttons or combined buttons are
collectively called buttons.
When playing a game, user can operate the single button or
the combined button, or trigger another combined button within
1s after pressing the first combined button. (Take two
combined buttons, “L+Sun” and “L+Moon” , for example,
within 1S after pressing the first combined button, “L+Sun” ,
the user can swift between different skills by pressing “Sun”
and “Moon” buttons repeatedly. )
2.One-key skill
MOQI Assistant provides the user with a launch button which
allow user to trigger a combination of multiple skills. The user
can modify and set the skill release interval and combination
at his discretion.
3.One-key macro
MOQI Assistant sets a macro button for the user, which can
realize the release of different skills one by one. After finishing
the one-key Macro settings, the user can press on the macro
button one by one to trigger different skills in sequence. If the
macro button is not pressed on for more than 5S, the one-key
macro function will automatically be interrupted. The macro
button functions will start from the first skill. The user can
modify and set the one-key macro at his discretion.
* The time is set to 10ms. To set the time interval more precisely,
the coordinate axis adopts unequal intervals. When the numerical
value is small, a larger proportional scale should be used.
Left Speaker
Battery cover
opening position
Camera Flash
Right Speaker
i7 PRODUCT SPECIFICATIONS MENU
MOQI service Wechat
MOQI website：
www.imuch.com
MOQI QQ group
MOQI BBS：
bbs.imuch.com
MOQI Weibo
Service hotline：
4006-61-00-61
MOQI ASSISTANT
Product Drawing
1
SIM card installation
2
1
2
3
杭州瑞高智能设备有限公司
型号：I7
TD-LTE数字移动电话机
CMIIT ID:
IMEI：
Nano
SIM
1
Nano
SIM
2
Before using the product, please carefully read the User Manual.
To get more information about our products and our company,
please login：www.imuch.com
or call our service hotline：[phone]
Power Key
Front Camera
L-3d Joystick
Cross Key
Receiver
Light Sen Sor
And ProximitySensor
Volume Key
Mountain(X) Key
Water(Y) Key
Moon(B) Key
Sun(A) Key
R-3d Joystick
Type C USB
Head Phone
R
L

User Manual
Indicator Light
Rear Camera
MIC
Gently press on “OPEN” and move upwards to open the SIM
cover. Unlock the SIM socket, and open the SIM cover.
Put the SIM card into the card socket, with metal contact
surface facing downwards and the bevel angle of SIM card
corresponding to the bevel angle of the socket, and then
cover the SIM cover.
Gently push in the “LOCK” direction to lock the SIM cover.
Ensure the SIM cover is pushed to the bottom.
Tips:
1. The mobile phone supports dual-Nano-SIM card with a
dimension of 12mm*9mm. Don’t use the non-standard card or
the hand-cut card.
2. After the SIM card is installed, the mobile phone should be
restarted to make the SIM card recognized by the system.
MOQI Mobile Phone Menu will automatically hide after the app
is launched. The user can invoke the menu by sliding from
bottom (or from right in case of landscape mode). The menu
contains the hide, back, home and menu buttons.
In order to better support the mobile game operation, MOQI
Mobile Phone is inbuilt with MOQI Assistant, which provides
keymap, one-click skill, one-click macro, and game auxiliary
message notification. The user can click on MOQI Assistant
floating window to set the keymap operations.
Keymap switch:
Open or close the keymap. After the keymap is turned off, the
original handle key function will be resumed. Please refer to
the attached list for the button value.
Directional skill switch:
After the switch is turned on, press on the button to release
the skill. Use the right rocking bar to adjust the skill release
direction. You can then release skill at desired direction by
releasing the key. MOQI Mobile Phone Button supports
correlated directional skill.
Button tip:
After the button tip is enabled, the set buttons will be displayed
on the screen. When it is turned off, the display disappears.
Operation tip:
After the operation tip is enabled, MOQI Assistant will be start-
ed as well. The user can operate according to the guides.
When it is turned off, the display disappears.
1.Button configurations
MOQI Mobile Phone has provided different official button config-
uration plans for different games or different roles in the same
game. These configurations are available upon the start of
game. The user can add or delete different button configura-
tions based on their use habits. The user can also share
button configurations with others or use others’ configurations.
Button (Single button and combined buttons):
MOQI Mobile Phone support up to ten single button settings
for game skills.
In order to introduce more available buttons, the user can
define new buttons by combining any two buttons. When
assigning button value on the keymap, the user can press on
two buttons within 30ms to generate a new button. Up to 43
combined buttons can be set.
* All the above 53 single buttons or combined buttons are
collectively called buttons.
When playing a game, user can operate the single button or
the combined button, or trigger another combined button within
1s after pressing the first combined button. (Take two
combined buttons, “L+Sun” and “L+Moon” , for example,
within 1S after pressing the first combined button, “L+Sun” ,
the user can swift between different skills by pressing “Sun”
and “Moon” buttons repeatedly. )
2.One-key skill
MOQI Assistant provides the user with a launch button which
allow user to trigger a combination of multiple skills. The user
can modify and set the skill release interval and combination
at his discretion.
3.One-key macro
MOQI Assistant sets a macro button for the user, which can
realize the release of different skills one by one. After finishing
the one-key Macro settings, the user can press on the macro
button one by one to trigger different skills in sequence. If the
macro button is not pressed on for more than 5S, the one-key
macro function will automatically be interrupted. The macro
button functions will start from the first skill. The user can
modify and set the one-key macro at his discretion.
* The time is set to 10ms. To set the time interval more precisely,
the coordinate axis adopts unequal intervals. When the numerical
value is small, a larger proportional scale should be used.
Left Speaker
Battery cover
opening position
Camera Flash
Right Speaker
i7 PRODUCT SPECIFICATIONS MENU
MOQI service Wechat
MOQI website：
www.imuch.com
MOQI QQ group
MOQI BBS：
bbs.imuch.com
MOQI Weibo
Service hotline：
4006-61-00-61
MOQI ASSISTANT
Product Drawing
1
SIM card installation
2
1
2
3
杭州瑞高智能设备有限公司
型号：I7
TD-LTE数字移动电话机
CMIIT ID:
IMEI：
Nano
SIM
1
Nano
SIM
2
Before using the product, please carefully read the User Manual.
To get more information about our products and our company,
please login：www.imuch.com
or call our service hotline：[phone]
Power Key
Front Camera
L-3d Joystick
Cross Key
Receiver
Light Sen Sor
And ProximitySensor
Volume Key
Mountain(X) Key
Water(Y) Key
Moon(B) Key
Sun(A) Key
R-3d Joystick
Type C USB
Head Phone
R
L

User Manual
Indicator Light
Rear Camera
MIC
Gently press on “OPEN” and move upwards to open the SIM
cover. Unlock the SIM socket, and open the SIM cover.
Put the SIM card into the card socket, with metal contact
surface facing downwards and the bevel angle of SIM card
corresponding to the bevel angle of the socket, and then
cover the SIM cover.
Gently push in the “LOCK” direction to lock the SIM cover.
Ensure the SIM cover is pushed to the bottom.
Tips:
1. The mobile phone supports dual-Nano-SIM card with a
dimension of 12mm*9mm. Don’t use the non-standard card or
the hand-cut card.
2. After the SIM card is installed, the mobile phone should be
restarted to make the SIM card recognized by the system.
MOQI Mobile Phone Menu will automatically hide after the app
is launched. The user can invoke the menu by sliding from
bottom (or from right in case of landscape mode). The menu
contains the hide, back, home and menu buttons.
In order to better support the mobile game operation, MOQI
Mobile Phone is inbuilt with MOQI Assistant, which provides
keymap, one-click skill, one-click macro, and game auxiliary
message notification. The user can click on MOQI Assistant
floating window to set the keymap operations.
Keymap switch:
Open or close the keymap. After the keymap is turned off, the
original handle key function will be resumed. Please refer to
the attached list for the button value.
Directional skill switch:
After the switch is turned on, press on the button to release
the skill. Use the right rocking bar to adjust the skill release
direction. You can then release skill at desired direction by
releasing the key. MOQI Mobile Phone Button supports
correlated directional skill.
Button tip:
After the button tip is enabled, the set buttons will be displayed
on the screen. When it is turned off, the display disappears.
Operation tip:
After the operation tip is enabled, MOQI Assistant will be start-
ed as well. The user can operate according to the guides.
When it is turned off, the display disappears.
1.Button configurations
MOQI Mobile Phone has provided different official button config-
uration plans for different games or different roles in the same
game. These configurations are available upon the start of
game. The user can add or delete different button configura-
tions based on their use habits. The user can also share
button configurations with others or use others’ configurations.
Button (Single button and combined buttons):
MOQI Mobile Phone support up to ten single button settings
for game skills.
In order to introduce more available buttons, the user can
define new buttons by combining any two buttons. When
assigning button value on the keymap, the user can press on
two buttons within 30ms to generate a new button. Up to 43
combined buttons can be set.
* All the above 53 single buttons or combined buttons are
collectively called buttons.
When playing a game, user can operate the single button or
the combined button, or trigger another combined button within
1s after pressing the first combined button. (Take two
combined buttons, “L+Sun” and “L+Moon” , for example,
within 1S after pressing the first combined button, “L+Sun” ,
the user can swift between different skills by pressing “Sun”
and “Moon” buttons repeatedly. )
2.One-key skill
MOQI Assistant provides the user with a launch button which
allow user to trigger a combination of multiple skills. The user
can modify and set the skill release interval and combination
at his discretion.
3.One-key macro
MOQI Assistant sets a macro button for the user, which can
realize the release of different skills one by one. After finishing
the one-key Macro settings, the user can press on the macro
button one by one to trigger different skills in sequence. If the
macro button is not pressed on for more than 5S, the one-key
macro function will automatically be interrupted. The macro
button functions will start from the first skill. The user can
modify and set the one-key macro at his discretion.
* The time is set to 10ms. To set the time interval more precisely,
the coordinate axis adopts unequal intervals. When the numerical
value is small, a larger proportional scale should be used.
Left Speaker
Battery cover
opening position
Camera Flash
Right Speaker
i7 PRODUCT SPECIFICATIONS MENU
MOQI service Wechat
MOQI website：
www.imuch.com
MOQI QQ group
MOQI BBS：
bbs.imuch.com
MOQI Weibo
Service hotline：
4006-61-00-61
MOQI ASSISTANT
Product Drawing
1
SIM card installation
2
1
2
3
杭州瑞高智能设备有限公司
型号：I7
TD-LTE数字移动电话机
CMIIT ID:
IMEI：
Nano
SIM
1
Nano
SIM
2
Before using the product, please carefully read the User Manual.
To get more information about our products and our company,
please login：www.imuch.com
or call our service hotline：[phone]
Power Key
Front Camera
L-3d Joystick
Cross Key
Receiver
Light Sen Sor
And ProximitySensor
Volume Key
Mountain(X) Key
Water(Y) Key
Moon(B) Key
Sun(A) Key
R-3d Joystick
Type C USB
Head Phone
R
L

User Manual
Indicator Light
Rear Camera
MIC
Gently press on “OPEN” and move upwards to open the SIM
cover. Unlock the SIM socket, and open the SIM cover.
Put the SIM card into the card socket, with metal contact
surface facing downwards and the bevel angle of SIM card
corresponding to the bevel angle of the socket, and then
cover the SIM cover.
Gently push in the “LOCK” direction to lock the SIM cover.
Ensure the SIM cover is pushed to the bottom.
Tips:
1. The mobile phone supports dual-Nano-SIM card with a
dimension of 12mm*9mm. Don’t use the non-standard card or
the hand-cut card.
2. After the SIM card is installed, the mobile phone should be
restarted to make the SIM card recognized by the system.
MOQI Mobile Phone Menu will automatically hide after the app
is launched. The user can invoke the menu by sliding from
bottom (or from right in case of landscape mode). The menu
contains the hide, back, home and menu buttons.
In order to better support the mobile game operation, MOQI
Mobile Phone is inbuilt with MOQI Assistant, which provides
keymap, one-click skill, one-click macro, and game auxiliary
message notification. The user can click on MOQI Assistant
floating window to set the keymap operations.
Keymap switch:
Open or close the keymap. After the keymap is turned off, the
original handle key function will be resumed. Please refer to
the attached list for the button value.
Directional skill switch:
After the switch is turned on, press on the button to release
the skill. Use the right rocking bar to adjust the skill release
direction. You can then release skill at desired direction by
releasing the key. MOQI Mobile Phone Button supports
correlated directional skill.
Button tip:
After the button tip is enabled, the set buttons will be displayed
on the screen. When it is turned off, the display disappears.
Operation tip:
After the operation tip is enabled, MOQI Assistant will be start-
ed as well. The user can operate according to the guides.
When it is turned off, the display disappears.
1.Button configurations
MOQI Mobile Phone has provided different official button config-
uration plans for different games or different roles in the same
game. These configurations are available upon the start of
game. The user can add or delete different button configura-
tions based on their use habits. The user can also share
button configurations with others or use others’ configurations.
Button (Single button and combined buttons):
MOQI Mobile Phone support up to ten single button settings
for game skills.
In order to introduce more available buttons, the user can
define new buttons by combining any two buttons. When
assigning button value on the keymap, the user can press on
two buttons within 30ms to generate a new button. Up to 43
combined buttons can be set.
* All the above 53 single buttons or combined buttons are
collectively called buttons.
When playing a game, user can operate the single button or
the combined button, or trigger another combined button within
1s after pressing the first combined button. (Take two
combined buttons, “L+Sun” and “L+Moon” , for example,
within 1S after pressing the first combined button, “L+Sun” ,
the user can swift between different skills by pressing “Sun”
and “Moon” buttons repeatedly. )
2.One-key skill
MOQI Assistant provides the user with a launch button which
allow user to trigger a combination of multiple skills. The user
can modify and set the skill release interval and combination
at his discretion.
3.One-key macro
MOQI Assistant sets a macro button for the user, which can
realize the release of different skills one by one. After finishing
the one-key Macro settings, the user can press on the macro
button one by one to trigger different skills in sequence. If the
macro button is not pressed on for more than 5S, the one-key
macro function will automatically be interrupted. The macro
button functions will start from the first skill. The user can
modify and set the one-key macro at his discretion.
* The time is set to 10ms. To set the time interval more precisely,
the coordinate axis adopts unequal intervals. When the numerical
value is small, a larger proportional scale should be used.
Left Speaker
Battery cover
opening position
Camera Flash
Right Speaker
i7 PRODUCT SPECIFICATIONS MENU
MOQI service Wechat
MOQI website：
www.imuch.com
MOQI QQ group
MOQI BBS：
bbs.imuch.com
MOQI Weibo
Service hotline：
4006-61-00-61
MOQI ASSISTANT
Product Drawing
1
SIM card installation
2
1
2
3
杭州瑞高智能设备有限公司
型号：I7
TD-LTE数字移动电话机
CMIIT ID:
IMEI：
Nano
SIM
1
Nano
SIM
2
Before using the product, please carefully read the User Manual.
To get more information about our products and our company,
please login：www.imuch.com
or call our service hotline：[phone]
Power Key
Front Camera
L-3d Joystick
Cross Key
Receiver
Light Sen Sor
And ProximitySensor
Volume Key
Mountain(X) Key
Water(Y) Key
Moon(B) Key
Sun(A) Key
R-3d Joystick
Type C USB
Head Phone
R
L

4.Message notification
Concerning different games and roles, MOQI Assistant provides
corresponding official strategies and playing methods. The user
can click to get more details.
Apart from the normal mobile phone functions, MOQI Mobile
Phone also provides the intelligent scenario-based no-disturbance
function:
When the user is playing games, the incoming call reminder
interface will neither be interrupted nor cover the current
application. The frontend game will not be influenced.
MOQI Mobile Phone supports PE + Quick Recharge. When the
mobile phone enters the quick charge mode, the charging interface
will display the “PE+” symbol. After the mobile phone is turned
off, the power can be recharged from 0% to 20% in 15min.
In order to provide the user with better game performance,
MOQI Mobile Phone adopts the exposed metal heat irradiator
design. The graphite heating pad is added to the battery cover
to improve the heat radiation performance, so that the processor
can maintain high performance operation for a long time. During
the use process, the temperature at the side close to the heat
radiator might rise. This is a normal phenomenon of high
performance operation of the processor, which will not influence
the normal use. Meanwhile, the processor will adjust the
performance output via the algorithm so as to keep operation
stability.
High performance design
6.0 Inches, 16.7-mega pixels, 1920*1080P
Gorilla Class 3 Glass Capacitive Screen
LTE FDD/TDD R9 Cat6 /DC-HSPA+/EDGE
Wifi 802.11ac /abgn, Bluetooth 5.0+HS,
GPS +AGPS
GSM：850/900/1800/2100
WCDMA：B1/B2/B5/B8
TD-SCDMA：B34/B39
LTE FDD：B1/B3/B7/B17
LTE TDD：B38/B39/B40/B41
China Mobile: 2G/3G/4G
China Unicom: 2G/3G/4G
China Telecom: 4G (Only supporting data service)
The main card is 4G and the subsidiary card is
2G GSM.
The user can set the main and subsidiary card
at his discretion.
Black
207*96*15mm
About 330g (Including 117g battery)
◎ Other fees may be created by sending and
receiving messages, uploading and down
loading, using automatic synchronization or
location services. If you would like to avoid
additional costs, please choose the appropriate
data charge plan. For more information, please
contact the service provider.
◎ Images and screen shots used in this manual
may be different from the actual product
appearance.
Please read this manual before operating the
device and keep it for future reference.
The firm continue to strive for perfect in all
phases of design,R&D,manufacturing, test and
seals, as mean while, we keep close contact with
consumers,every demand will be well satisfied by
the team through innovation, diligence and teamwork.
In order to offer quicker and higher-quality services,
we will work hard to provide a rich experience
through our gaming products. With our products,
you can easily manipulate popular titles and
enjoy the most modern games in vivid graphic
detail.Hangzhou iReadyGo Intelligence Technology
Co.Ltd. Reserves the right to improve the described
products, if specifications are subject to change.
Any update and changes will not be noticed,
please take the product as standard, the firm
reserve the right of final explanation.
MUCH UI (Customized based on Android 7.1)
MTK6797, ten-core, 2.3Ghz
4GB
64GB
5800mAh, Li-polymer anti-explosive battery
(Exchangeable and dismountable)
Inbuilt with GPS, supporting A-GPS
Nine-axis sensor (gyroscope, electronic
compass, and gravitational sensing),
light sensor, proximity sensor
16-mega pixels
5-mega pixels
Dual-path Class-K amplifier
and dual-speaker stereo
Type C interface
12V1.5A, PE + Quick charge
Four-phase 3.5mm stereo headset interface
(Following the international standard, CTIA)
Recharge
Call
MOQI Mobile Phone is capable of quick screenshot. The function
is on by default when the mobile phone is delivered from the
factory. After entering into the system, the user can click on the
screenshot floating window to capture the screen as long as the
screen is on. Press and hold the floating window to enter the
screenshot setting.
Quick screenshot supports GIF screenshot at an interval of 10s.
To turn off or turn on this function, the user can set it in the
“setting”→“display”→“screenshot setting”.
Quick screenshot Basic parameters Hardware parameters
Thanks for buying this device,the product will
provide you qualified communication and enter-
tainment service.
This manual will help you learn about the function
and features of the device.
Before using this product, please carefully read all
the security information along with this manual,
in order to ensure safe and proper use.
◎ The descriptions in this manual are based on
the terminal’s default settings.
◎ Images and screen shots used in this manual
may be different from the actual product
appearance.
◎ The contents in this manual may be different
from products, and may also be different from
the software provided by the service provider.
Any changes will be without prior notice.
◎ Features available and the additional services
may be different owing to the different products,
software or service providers.
◎ The format and information in the manual are
based on the operating system Google Android;
users' operation systems may differ from it.
◎ The the function of applications and programs
may differ due to differences in national, regional
or hardware standards. Responsibility for
performance problems caused by third-party
applications will not be born by us.
◎ The firm will not liable to any responsibility for
performance problems causes by the third-party
applications.
User Manual
If the user chooses the no-disturbance mode, the incoming
call reminder interface will disappear but ring and vibration
remain. and the call will not be hung up. The frontend game
will not be influenced
If the user chooses the hands-free answering mode, the
incoming call reminder interface will disappear. The mode
will be automatically changed to the hands-free mode or the
headset mode. The frontend game will not be influenced.
The other two modes include Reject and Answer.
1
2
3
【Warranty Card 】
【Repair Records 】
Product Information Customer Name
Product Model Gender
Serial No. Contact Tel.
Device E-mail
Date Cable Mailing Address
charger Dealer Name
Others Dealer Tel.
Purchase Date Mailing Address
Invoice No.
Repair Records Delivery Date
Fault Status
Fault Cause
Repair Status
Return & Change State
Repari Department Name Seal
Telephone Postal Code
Address
For more information,
please scan the two-dimensional code
Main screen
dimensions
Operating
system
CPU
RAM
ROM
Battery
type
GPS
Sensor
type
Rear camera
Front camera
Audio
Hardware interface and others
Data
hardware
interface
Headset
socket
Touch
screen
Data
service
Supported
frequency
band
Chinese
operators
Color
Dimension
Weight
Dual SIM
Dual
Standby
(DSDS)
Attached list:
Instructions for the button value
* The above shows the Android button value by default, same as
the button value of the Android handle (ABXY).
Left Joystick 106 L 102
Right Joystic 107 R 103
Down 19 Sun 96
Up 20 Moon 97
Left 21 Mountain 99
Right 22 Water 100
Single
button
Android
button value
Single
button
Android
button value
L+R 1045
L+Sun 1034 R+Sun 1035
L+Moon 1038 R+Moon 1039
L+Mountain 1041 R+Mountain 1042
L+Water 1043 R+Water 1044
L+Up 1008 R+Up 1009
L+Down 1016 R+Down 1017
L+Left 1023 R+Left 1024
L+Right 1029 R+Right 1030
Up+Sun 1004 Down+Sun 1012
Up+Moon 1005 Down+Moon 1013
Up+Mountain 1006 Down+Mountain 1014
Up+Water 1007 Down+Water 1015
Up+Left 1002 Down+Left 1010
Up+Right 1003 Down+Right 1011
Up+Down - Left+Right -
Left+Sun 1019 Right+Sun 1025
Left+Moon 1020 Right+Moon 1026
Left+Mountain 1021 Right+Mountain 1027
Left+Water 1022 Right+Water 1028
Sun+Moon 1031 Moon+Mountain 1036
Sun+Mountain 1032 Moon+Water 1037
Sun+Water 1033 Mountain+Water 1040
* The above are the combined button values of the mobile phone.
Combined
buttons
Android
button value
Combined
buttons
Android
button value