MORDEN FORT G20 User manual

G20 CHAIR
ASSEMBLY
INSTRUCTIONS

CARTON ITEM PARTS INENTIFICATION ID QUANTITY HARDWARE
PACK ID ITEM QTY
SOFA
SEAT
FRAME
G20-S1
CHAIR SEAT
A 1PC
FPALSTIC
WASHER 7PCS
G CHAIR LEG 4PCS
PILLOW
B 1PC
IBOLT
φ8MM*60MM 10PCS
JWASHER
φ8MM 10PCS
K
SPRING
WASHER
φ8MM
10PCS
LALLEN
WRENCH 1PC
SOFA
BACK
FRAME
G20-S2
CHAIR BACK
C 1PC
ARMS G20-ARM
LEFT ARM
D 1PC
RIGHT ARM
E 1PC
02

STEP 1
1. Take out the CHAIR SEAT& CHAIR BACK& ARMS & PILLOW & HARDWARES
STEP 2
2. Find a clean plane, place the RIGHT ARM(E) and LEFT ARM(D) on the both
side of the CHAIR SEAT(A) as Picture shows.
Then assembly them with BOLTS(I)&WASHERS(J)&SPRING WASHERS(K)&WRENCH(L).
STEP 3
03
3. Assembly the legs to the Sofa
Bx1
X7
X4
X1
X10
X10
X10
D
E
A
Cx1
Dx1
Ex1
G
I
F
L
J
K
A
A
D
E

STEP 4
4. Connect the CHAIR BACK(C) with ARMS(D&E) on both side.
STEP 5
5.Assembly the CHAIR BACK(C) and the CHAIR SEAT(A) with BOLTS(I)&WASHERS(J)
&SPRING WASHERS(K)&WRENCH(L).
STEP 6
04
C
D
E
A
A
C
D
E
B
I
L
J
K

ITEM: G20 CHAIR
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior
to start of assembly.
3.Please follow attached instructions in the same sequence as
numbered to assure fast & easy assembly
1.Don’t attempt to repair or modify parts that are broken or
defective. Please contact the store immediately.
2.This product is for home use only and not intended for
commercial establishments.
ASSEMBLY TIME: 20 MINUTES
If you receive any damaged or defective parts, please provide the following
information and contact us as soon as possible. We will respond
within 24 hours:
1. Pictures or video of the damaged/defective part
2. Part number according to the manual
3. Order ID
You can reach us by phone at 909-203-1668 or by email at csr@mordenfort.
com.
We apologize for any inconvenience this may have caused.
05