Morel SoundSpot User manual

and

*SP-2 and SP-3 mounting options are the same. Demonstrated in the drawing below is the SP-2 model
Lock the speaker in the desired
angle by securing the screw with
moderate force
Take off the speaker from the base by
removing the grill and releasing the
locked screw with an allen key (up to
5 turns) (see no. 5).

6
7
A
B
Take off the speaker from the base by
removing the grill and releasing the
locked screw with an allen key
(up to 5 turns) (see no. 5).
4
3
4.0mm
Insert the terminal adaptor to
the base
5
Lock the speaker in
the desired angle by
securing the screw
with moderate force.
Place the grill in position
SP-2 / SP-3
speaker rotation options
2
7mm(0.275")
SP-2 SP-3
A
B
A
1
SP-2: Lock cable inside the
terminal hole
SP-3: Push terminal