STEP 1 Secure mount to reinforced ceiling
or mounting surface: Pre-drill holes using a 1/8”
drill bit. Use lag bolts or appropriate hardware for
the structure to secure the mount to the reinforced
mounting surface.
STEP 2 Secure the television or monitor to the
mount: Line up the hole pattern on your television
with the matching hole pattern on the mounting plate.
Using the appropriate mounting hardware and washers,
secure the television to the mounting plate.
CAUTION:
Using a screw or bolt length that is too long for your application may result in puncturing exterior structure.
Optional Washer (4)Lock Washer (4)Bolt (4)
CAUTION: Structure must be reinforced
- the size and weight of your television plus the weight
of the mount must be properly supported. MORryde
is responsible for the design and manufacturing of
our parts; we are not responsible for the structure it
is mounted to or the construction method used to
reinforce the mounting surface.
NOTE: This step may require two people. MORryde is not
responsible for property damage and/or personal injury.
Top view of mounting holes.
To Flip Down:
While supporting the TV with
one hand, pull lever to release
lock and gently guide TV into
the vertical position.
To Flip Up:
Gently lift TV toward the
ceiling and allow it to lock into
place.
