Moser SPRING RIDE Manual

Moser Rides SRL
Manufacturers and sellers of quality Amusement Rides
Via Abetone Brennero –46035 Ostiglia (Mn) Italy
Tel. ++39 386 800001 Fax ++39 386 802099
Email: [email protected]
Pag. n. 1
SPRING RIDE
PROCEDURE FOR MAINTENANCE OF THE HARNESS LIMIT SWITCHES
To get that all harness limit switches are activated at the third click proceed as follow:
1. Close all the handles except that you need to adjust
2. Close this handle until the third click
3. Check on the operator console if the signal lamp “ SAFETY BARS CLOSED “ is
power ON
Fig. 1: Safety bars closed signal lamp

Moser Rides SRL
Manufacturers and sellers of quality Amusement Rides
Via Abetone Brennero –46035 Ostiglia (Mn) Italy
Tel. ++39 386 800001 Fax ++39 386 802099
Email: [email protected]
Pag. n. 2
SPRING RIDE
PROCEDURE FOR MAINTENANCE OF THE HARNESS LIMIT SWITCHES
If instead the signal lamp stays out
•Loose the fixing screws of the limit switch
•Move the limit switch until the lever activate the contact (check the signal lamp on
the operator console).
•Tight The fixing screws