MOTECK TBA User manual

www.moteck.com
USER GUIDE
Technical changes may be made to improve the product without notice！
2021.09_V2.0Revision
Bluetooth Adapter
TBA

www.moteck.com
1
Installation
Step 1: Download MOTECK “Bluetooth LE Adapter” APP
1.1 Find ”Play Store” icon on your smart phone (Fig 1).
1.2 On the searching page of play store, key in “MOTECK” to search “Bluetooth LE Adapter”APP
(Fig 2).
1.3 Click the download button to download the APP (Fig 3).
Step 2: Execute APP
2.1 Click MOTECK “BLE Adapter” icon to start it (Fig 4).
2.2 You will see a pop-up window “Connect Device Wait...” (Fig 5).
2.3 Now you can start your operation (Fig 6).
Fig 3Fig 1 Fig 2
Fig 4 Fig 5 Fig 6

www.moteck.com
2
Step 3: Setting for Bluetooth
3.1 Click symbol for “Device Settings” (Fig 7).
3.2 Click “Search Bluetooth Device”, then you will see a pop-up window “Search Device Wait…”.
(Fig 8).
Step 4: Setting for Device (Take TBA3 adapter as an example)
4.1 Click “Bluetooth Interface” and select the TBA3 device you intended to connect. You may find
a serial number as TBA3-xxxxxxx on the label of TBA3 (Fig 9).
4.2 After selecting the device, you will find the device number “TBA3-xxxxxxx” appears under
“Device Name” and the MAC address appears under “Bluetooth Interface” (Fig 10).
Fig 7
Fig 10
Fig 8-1 Fig 8-2
Fig 9-1 Fig 9-2

www.moteck.com
Step 5: Rename Device
If you’d like to rename the device, please click “Device name” to proceed. Then the changed name
will appear under “Device Name” (Fig 11).
3
Fig 11-1 Fig 11-2 Fig 11-3
Fig 11-4

www.moteck.com
4
Step 6: Setting for motor
Click “Device Class” to indicate the type of your MOTECK motor. The chosen item will appear under
“Device Class” (Fig 12).
Connect button
Step 7: First time connection
If it is the first time to connect this APP to TBA device (Bluetooth Adapter), please follow the process
below to link.
7.1 Press the connect button on TBA. There will be a short beep sound to trigger the connection (Fig 13).
Note: Procedure 7.1 is required only for the first connection.
7.2 Click symbol on the main page (Fig 14).
7.3 Find and click the “Bluetooth Interface” you intend to connect (Fig 15).
Fig 13 Fig 14 Fig 15
Fig 12-1 Fig 12-2 Fig 12-3

www.moteck.com
5
7.4 Click “Device name” to proceed (Fig 16).
7.5 Click “Connect” to connect the device (Fig 17).
7.6 Once the connection is successful, TBA will have two short beeps and the LED will be illuminated.
(Fig 18).
7.7 The MOTECK Logo on the main page of APP will turn into green color (Fig 19).
7.8 If the connection failed with a long beep sound, please repeat the process from 7.1 to 7.7 again.
Fig 16 Fig 17 Fig 18
Fig 19

www.moteck.com
6
Step 8: Disconnection/ Reconnection
8.1 This is not a must step. But if necessary, you can click “ ” (menu button) and “Disconnect” to
disconnect the device (Fig 20).
8.2 Once the disconnection is successful, the MOTECK Logo on the main page will
turn into white color (Fig 21).
8.3 Click “Connect” to reconnect the device. Then you will see a pop-up window “Wait…” (Fig 22).
8.4 Once the connection is successful, the MOTECK Logo on the main page will turn into
green color (Fig 23).
Fig 21
…
Fig 20-2Fig 20-1
Fig 22-1 Fig 22-2 Fig 23

www.moteck.com
Step 9: Exit
Click “ ” (menu button) and “Exit” to exit the APP (Fig 24).
…
Fig 24
7

8
www.moteck.com
Regular Operation
1. There are three types of operating UI
The type will be decided when you choose the type of your MOTECK motor in the step 6, setting for
motor (Fig 25).
●2 motors ●3 motors ●2 motors(Memory)
2. Save position function
2.1 Press button for approximate 1 second.
2.2 You will hear a low-speed sound from device and click or to save.
2.3 When position is saved successfully, you will hear a high-speed sound from device first and
stop afterwords.
3. Connection
Once your smart phone has ever successfully connected with indicated TBA as mentioned in
installation step 7, next time when you turn on APP on this smart phone, the connection will be done
automatically if the smart phone is within the accessible range of the indicated TBA adapter.
Note 1: Procedure 4.1 is not necessary if this TBA has been connected by this APP.
Note 2: Each TBA is able to memorize up to 4 Android Devices. The first device will no longer be
kept in the memory if there is 5th device connecting to this TBA.
Fig 25-1 Fig 25-2 Fig 25-3

9
4. Change setting of motors allocation
You may change the allocation for each motor according to product (bed) design.
Default setting of Head / Back / Foot is motor 1 / motor 2 / motor 3.
www.moteck.com
5. You may set preferred vibration mode as followings, which makes your smart phone
vibrates in different ways while you are pressing the control keys.
●On: Keep vibrating while control keys are pressed
●Off: Turn off vibration
●Once: Vibrate for only one time while control keys are pressed

10 MOTECK MO-I-0027-V2.0
Terms of Use
The user is responsible for the suitability of MOTECK products, and the products listed on the MOTECK website are subject to change without notice. MOTECK reserves the right to terminate sales or
delete any products displayed on the website or listed in its catalog.
6. See more information, please press menu button on your phone.
www.moteck.com