Motorola LS2208AP User manual

LS2208AP
Quick Reference Guide

2 LS2208AP
©2010 MOTOROLA, INC. All rights reserved.
Motorola reserves the right to make changes to any product
to improve reliability, function, or design.
Motorola does not assume any product liability arising out
of, or in connection with, the application or use of any
product, circuit, or application described herein.
No license is granted, either expressly or by implication,
estoppel, or otherwise under any patent right or patent,
covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Motorola
products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in Motorola
products.
MOTOROLA, the Stylized M Logo and Symbol and the
Symbol logo are registered trademarks of Motorola, Inc.
Other product names mentioned in this manual may be
trademarks or registered trademarks of their respective
companies and are hereby acknowledged.
Motorola, Inc.
One Motorola Plaza
Holtsville, N.Y. 11742-1300
http://www.motorola.com/enterprisemobility
Warranty
For the complete Motorola hardware product warranty
statement, go to:
http://www.motorola.com/enterprisemobility/warranty.

Quick Reference Guide 3
Introduction
The LS2208AP scanner combines excellent scanning
performance and advanced ergonomics to provide the
best value in a lightweight laser scanner. Whether used
as a hand-held scanner or in hands-free mode in a stand,
the LS2208AP scanner ensures comfort and ease of use
for extended periods of time.

4 LS2208AP
Parts of the Scanner
Exit Window
Trigger
Beeper
LED

Quick Reference Guide 5
Installing the Interface Cable
1. Plug the interface cable modular connector into the
cable interface port on the bottom of the scanner’s
handle.
2. Connect the other end of the interface cable to the
host.
3. Connect the power supply to the cable (if necessary).
4. Scan the appropriate bar code(s) beginning on page
29 to communicate with the host.
Removing the Interface Cable
Unplug the installed cable’s modular connector by
depressing the connector clip with the tip of a screwdriver.
Interface cable
modular connector
Cable interface
port

6 LS2208AP
Aiming
Note: The scanner performs best when it is not ex-
actly perpendicular to the bar code.
Scanning In Hand-Held Mode
1. Ensure all connections are secure.
2. Aim the scanner at the bar code.
NOTE Operation of the device without
regulatory approval is illegal.
65 65
Specular
Reflection
± 4°
Bar code

Quick Reference Guide 7
3. Ensure the scan line crosses every bar and space of
the symbol.
4. Upon successful decode, the scanner beeps and the
LED turns green.
Scanning in Hands-Free Mode
In the stand, the scanner is in constant-on mode. When
you remove the scanner from the stand it operates in its
normal hand-held mode.
5. Insert scanner in stand.
6. Present bar code and ensure the scan line crosses
every bar and space of the symbol.
7. Upon successful decode, the scanner beeps and the
LED turns green.
012345 012345
RIGHT WRONG

8 LS2208AP
Troubleshooting
Problem Possible
Cause Possible Solutions
Nothing
happens when
you follow the
operating
instructions.
No power to the
scanner. Check the system power. Ensure the power supply is
connected if your
configuration requires a
power supply.
Interface/power
cables are
loose.
Check for loose cable
connections.
Laser comes
on, but bar
code does not
decode.
Scanner is not
programmed
for the correct
bar code type.
Ensure the scanner is
programmed to read the
type of bar code you are
scanning.
Bar code
symbol is
unreadable.
Check the symbol to make
sure it is not defaced. Try
scanning test symbols of the
same bar code type.
Distance
between
scanner and
bar code is
incorrect.
Move the scanner closer to
or further from the bar code.
Bar code is
decoded, but
nottransmitted
to the host.
Scanner is not
programmed
for the correct
host type.
Scan the appropriate host
type bar code.

Quick Reference Guide 9
Scanned data
is incorrectly
displayed on
the host.
Scanner is not
programmed to
work with the
host.
Ensure proper host is
selected.
Check the scanner’s host
type parameters or editing
options.
For RS-232, ensure the
scanner’s communication
parameters match the
host’s settings.
For a keyboard wedge
configuration, ensure the
system is programmed for
the correct keyboard type,
and the CAPS LOCK key is
off.
Ensure editing options (e.g.,
UPC-E to UPC-A
Conversion) are properly
programmed.
Problem Possible
Cause Possible Solutions

10 LS2208AP
はじめに
The LS2208AP スキャナは、優れたスキャン性能と先進
の人間工学的設計を兼ね備えた、最高品質の軽量レーザ
スキャナです。LS2208AP スキャナは、ハンドヘルド
モードまたはスタンドを使ってハンズフリーモードで
使用することができ、操作が簡単で使い勝手が良く、末
永くお使いいただけます。