Mountfield MC 300 Li User manual
Please Read These Instructions
Before Using Your Mower
Operating Instructions
for models
MC 300 Li, MC 340 Li, MC 380 Li
Battery Lawnmowers
Do not return this product to store, please call
the Service Link Helpline.
Products with petrol in cannot be accepted
back in store.
Supported by
For all your Warranty,
Parts and Service needs
0800 121 6585
1800 806 149 ROI
www.servicelink.org.uk
Visit www.servicelink.org.uk for a quick start video
Product Codes:
293305064/MC
293345064/MC
293385064/MC
MC 300 Li = E 300 Li 40 P
MC 340 Li = E 340 Li 40 P
MC 380 Li = E 380 Li 40 P
ENGLISH - Original instruction ..................................................................................................... EN
I G J
D
H
F E
BCA
G
K
1
2
14
2
3
6 8
5 7
10a
W
12
10
9
Type:
- s/n
Art.N.
A
B
D
C
B
C
A
D
E
3
4
I
II
C
D
E
F
G
A
B
C
D
E
B
A
D
F
E
C
G
J
K
H
I
5
6
I
II
A
A
B
B
A
7
8
9
A
A
AB
A
10
11
12
A
B
A
B
A
B
B
A
13
14
15
A
A
B
A
B
A
16
17
18 19
A
B
22
23 24
A
B
20 21
TECHNICAL DATA E 300 Li 40
Series
E 340 Li 40
Series
E 380 Li 40
Series
Nominal power * W 400 470 550
Max. motor operation speed * min 3500 3300 3300
MAX power voltage and frequency V / DC 40 40 40
NOMINAL power voltage and fre-
quency V / DC 36 36 36
Machine weight * kg 8,9 - 9,0
Cutting width cm 30 34 38
Dimensions
Length cm
Width cm 36 37
Height cm
Cutting means code cm
Sound pressure level
Measurement uncertainty
dB(A)
dB(A)
3
3
75,8
3
Measured acoustic power level
Measurement uncertainty
dB(A)
dB(A)
84,7
86,6
88,9
Guaranteed acoustic power level dB(A) 96 96 96
Measurement uncertainty
m/s
m/s
3,0
3,0
3,0
OPTIONAL ATTACHMENTS
Mulching kit
Battery, mod.
Battery charger, mod. CG 40 Li
WARNING!: READ THIS MANUAL CAREFULLY BEFORE
USING THE MACHINE. Keep safe for future use.
EN
INDEX
..........................................
.............................................
................................................ 4
............... 4
......................................................... 4
.............................................. 4
3.4 Main components................................................ 5
................................................................... 5
....................................... 5
..................................... 5
................................................ 5
.................................................................. 6
........................ 6
................................................. 6
5.3 Cutting height adjustment................................... 6
................................................. 6
........................................ 6
...................................................... 7
6.3 Start-up ............................................................... 7
6.4 Operation ............................................................ 7
6.5 Stop ..................................................................... 8
6.6 After use .............................................................. 8
.......................................... 8
............................................ 8
................................................................. 9
7.3 Cleaning .............................................................. 9
..................................................... 9
8. OCCASIONAL MAINTENANCE................................... 9
...................................................
...................................................................
...............................................................
.............................................
.................................
....................................
...........................................
..............................................
...............................................
.................................
.....................................................
............................................................
.................................................
1. GENERAL INFORMATION
1.1 HOW TO READ THIS MANUAL
Some of the paragraphs in this manual contain
particularly important information in terms
of safety and operation, and are highlighted
NOTE or IMPORTANT These give details or further
information on what has been previously indicated and aim
to prevent damage to the machine or cause other damage.
The
and/or third party injury and/or damage.
The paragraphs highlighted in a dotted grey square
all models documented in this manual. Check if
Whenever reference is made to a position on the
this refers to the operator's working position.
1.2 REFERENCES
1.2.1 Figures
1.2.2 Titles
The manual is arranged in chapters and paragraphs.
2. SAFETY REGULATIONS
2.1 TRAINING
Become familiar with the controls and the
proper use of the machine. Learn how to stop the
motor quickly. Failure to follow the warnings and
instructions may result in re and/or serious injury.
•
individuals who are not familiar with the instructions.
•
given supervision or instructions concerning use
of the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall
• Never use the machine if the user is tired or
unwell, or has taken medication, drugs, alcohol or
• Do not allow children or other passengers
to ride on the machine
•
for accidents or unexpected events occurring to other
carried out and to take all the necessary precautions
to ensure his own safety and that of others, particularly
• If the machine is sold or lent to others, make
sure that the operator looks over the user
instructions contained in this manual.
2.2 PRELIMINARY OPERATIONS
Personal Protective Equipment (PPE)
•
footwear with non-slip soles and long trousers.
open sandals. Wear hearing protection devices.
•
hear any warnings (shouting or alarms). Be careful
of what occurs around you in the work area.
• Wear protective gloves whenever your hands are at risk.
•
•
Work / Machine Area
• Thoroughly inspect the entire work area and
machine or damage the cutting means/rotating
.
2.3 DURING OPERATION
Work Area
• Do not use the machine in environments that pose
liquids, gases or powders. Power tools create
sparks which may ignite the dust or fumes.
•
• Keep people, children and animals away from the work
• Avoid working with wet grass, in the rain and when
there is a risk of a thunderstorm, especially lightening.
• Do not expose the machine to rain or wet
environments. Water entering a power tool
will increase the risk of electric shock.
• Pay careful attention to uneven ground
(hills, dips), slopes, hidden hazards and
•
The machine could overturn if a wheel slides
over the edge or if the earth gives way.
• Always mow across a slope and never up and down
to slide sideways or make you lose control of it.
•
machine near the road.
Conduct
•
• Never run, always walk.
• Do not allow the lawnmower to pull you along.
• Always keep hands and feet away from the cutting
means, when starting and when using the machine.
•
rotate for a few seconds after disengagement
• Keep away from the discharge opening.
move the machine away to prevent further damage;
if an accident occurs with injuries or third parties
the medical authorities for any necessary health
damage or injury to persons or animals if ignored.
Restrictions of use
• Never operate the machine with guards damaged,
side discharge guards, rear discharge guards).
• Don’t use the machine if the attachments/
tools are not installed in their seats.
• Never disengage, deactivate, remove or tamper
with the safety systems/micro switches installed.
• Do not strain the machine too much and do not
use a small machine for heavy-duty work; if you
use the right machine, you will reduce the risk of
hazards and improve the quality of your work.
EN - 3
2.4 MAINTENANCE, STORAGE
Ensure regular maintenance and correct storage to
maintain machine safety and high performance levels.
Maintenance
• Never use the machine with worn or damaged
parts. Faulty or worn-out parts must always
• Be careful during adjustment of the machine to prevent
instructions are the maximum levels for use of the
is necessary to take preventive steps to eliminate
Storage
•
2.5 BATTERY / BATTERY CHARGER
IMPORTANT The following safety instructions
are in addition to the safety requirements
provided in the specic battery and battery
charger manual delivered with this machine.
•
•
•
•
paper clips, coins, keys, nails, screws or other
•
•
never come into contact with each other and
never use metal containers to transport them.
2.6 ENVIRONMENTAL PROTECTION
•
times of the day only (not early morning or late
• Scrupulously comply with local regulations for the
disposal of packaging, deteriorated parts or any
elements with a strong environmental impact; this
centres, which will recycle the materials.
• Scrupulously comply with local regulations
for the disposal of waste materials
• When the machine is withdrawn from service,
it to a waste disposal facility in accordance
with the local regulations in force.
Do not throw electrical equipment away with
domestic waste. According to the European
equipment waste and its implementation in
compliance with national standards, old
disposal of this product, contact your dealer or a domestic
waste collection service.
paying due attention to the environment. Batteries
disposed of separately at a facility that accepts
Separate waste collection of the products and
materials help to prevent environmental pollution
and reduces the demand for raw materials.
EN - 4
3. ABOUT THE MACHINE
3.1 MACHINE DESCRIPTION AND INTENDED USE
This machine is pedestrian-controlled lawnmower.
The machine is essentially composed of a motor
which drives a cutting means enclosed in a
casing, equipped with wheels and a handle.
at a safe distance from the rotating cutting means.
If the operator leaves the machine, the motor and
cutting means will stop within a few seconds.
3.1.1 Intended use
collect) grass in gardens and grassy areas,
with a height according to its cutting capacity,
1. mow the grass and collect it in the grass catcher;
2. mow the grass and discharge it on the
ground through the rear part;
3. mow the grass, chop it and discharge it on
if available).
various operating modes, illustrated in this manual or the
instructions that accompany the single attachments.
3.1.2 Improper use
Any other use that does not comply with the
people and/or property. Examples of improper
– Allowing children, animals or other passengers on the
–
–
–
–
–
cutting vegetation other than grass;
–
IMPORTANT Improper use of the machine will
void the warranty and relieves the Manufacturer of
any liability, placing all responsibility for damage or
injury, to him/herself or third parties, on the user.
3.1.3 Type of users
i.e. non-professional operators. It is intended
IMPORTANT The machine must
be used by one operator.
3.2 SAFETY SIGNS
function is to remind the operator of the correct
conduct for use, with due care and caution.
Warning
Danger! Risk of projected ob-
jects
work area during machine use.
Danger of cutting. Cutting means
in motion. Do not put your hands or
feet inside the housing of the cutting
means.
Be careful when using the cutting
means: Do not insert hands or feet
into the cutting means housing. The
cutting means continues to turn even
-
is carried out.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.
3.3 IDENTIFICATION LABEL
1. Sound power level
2. CE conformity marking
3.
4. Type of machine
5.
6. Name and address of Manufacturer
7. Article code
8. Max. motor operation speed
9. Weight in kg
10. Power voltage and frequency
11. Electrical protection rating
12. Maximum and nominal power
EN - 5
IMPORTANT Quote the information on
the product identication label whenever you
contact an Authorised Service Centre.
IMPORTANT An example of the Declaration of
Conformity is provided on the last pages of this manual.
3.4 MAIN COMPONENTS
The machine is composed of the following main
A. Chassis
the rotating cutting means.
B. Engine
to the cutting means;
C. Cutting means
designed to cut the grass.
D. Rear discharge guard: it is a safety device which
.
E. Grass catcher: apart from collecting the cut grass,
it also constitutes a safety element, preventing
cutting means from
.
F. Handle
enough to ensure the operator remains at a safe
distance from the rotary cutting means whilst working.
G. Battery (if it is not supplied with the machine, see
chapter 15 “accessories on request”)
H. Switch command
same time engages/disengages the cutting means
I. Hatch for accessing the battery compartment
J. Safety key (Deactivation device)
The key activates / deactivates the
electric circuit of the machine.
K. Battery charger (if it is not supplied with the
machine, see chapter 15 “accessories on
request”)
4. ASSEMBLY
The safety regulations to follow are
described in chap. 2. Strictly comply with these
instructions to avoid serious risks or hazards.
For storage and transport purposes, some components of
Unpacking and completing the assembly should
be done on a at and stable surface, with enough
space for machine handling and its packaging,
always making use of suitable equipment. Do not
use the machine until all the indications provided
in the “ASSEMBLY” section have been carried out.
4.1 ASSEMBLY COMPONENTS
4.1.1 Unpacking
1. Carefully open the packaging, paying
attention not to lose components.
2.
including these instructions.
3.
4.
compliance with local regulations.
Before assembling, make sure the safety
key is not inserted into its housing.
4.2 GRASS CATCHER ASSEMBLY
• Type “I”
– Join the two upper (Fig. 3.A) and lower (Fig.
3.B) components of the grass catcher,
– Fit the handle (Fig. 3.C) on the upper part
of the grass catcher, inserting it in the
appropriate slots, until a click is heard.
– Mount the conveyor (Fig.3.D) in the indicated
• Type “II”
– Join the two lateral components (Fig. 4.A) (Fig.
– Fit the handle (Fig. 4.D) on the upper part
of the grass catcher, inserting it in the
appropriate slots, until a click is heard.
– Mount the conveyor (Fig.5.E) in the indicated
4.3 HANDLE ASSEMBLY
• Type “I”
– Insert the lower right part and the left part (Fig.5.A)
of the handle in their seats and fasten them with
Fig.5.B) supplied.
– Fasten the upper part of the handle (Fig.5.C)
and the screws supplied (Fig.5.E).
–
• Type “II”
–
the screws protruding from the chassis (Fig.6.C).
– Insert the washers (Fig.6.D) on the screws
–
– Fasten the upper part of the handle (Fig.6.G)
and the screws supplied (Fig.6.I).
–
EN - 6
• Models with handle height adjustment
–
– To adjust the height of the handle, loosen the
5. CONTROLS
5.1 SAFETY KEY (DEACTIVATION DEVICE)
• Models with 1 battery slot
–
circuit is completely deactivated to prevent
uncontrolled use of the machine.
–
machine is activated, thus starting the machine.
• Models with 2 battery slots
–
circuit is completely deactivated to prevent
uncontrolled use of the machine.
–
of the machine is activated, thus starting the
–
of the machine is activated, thus starting the
IMPORTANT Remove the safety key whenever the
machine is not used or when it is left unattended.
5.2 SWITCH COMMAND
The switch control starts/stops the engine and at the
same time engages/disengages the cutting means.
1. Start-up.
.
2. When the engine starts, the
cutting means is also engaged.
3. Stop. The engine stops automatically
when the lever is released (Fig. 9.B).
5.3 CUTTING HEIGHT ADJUSTMENT
Lower or raise the chassis to cut the
Carry out this operation when
the cutting means is stationary.
The cutting height is adjusted using
6. USING THE MACHINE
The safety regulations to follow are
described in chap. 2. Strictly comply with these
instructions to avoid serious risks or hazards.
6.1 PRELIMINARY OPERATIONS
Before starting work, it is necessary to carry out
several checks and operations to ensure that the work
1. Make sure that the safety key is not inserted in its slot;
2.
position on the ground;
3.
4.
5. Adjust the cutting height (par.5.4).
6.1.1 Checking the battery
–
6.1.2 Preparing the machine before starting work
NOTE This machine can be used to mow lawns in
a number of dierent ways; before starting, prepare
the machine based on how the lawn is to be mowed.
a. Preparation for grass cutting and
collection in the grass catcher:
1.
b. Preparation for grass cutting and rear
grass discharge on the ground:
1.
EN - 7
c. Preparation for grass mowing and
chopping (mulching function):
1.
in the discharge opening.
To remove the chute plug, lift the rear discharge
6.2 SAFETY CHECKS
Always carry out the safety checks before use.
6.2.1 General safety check
Object Result
Grips Clean, dry
Handle
Cutting device Clean, not damaged
or worn
grass catcher
Good condition. No
damage. Properly installed.
Switch command The lever must move
freely, it must not need
forcing and should return
automatically and rapidly
Battery No damage to the casing,
no liquid leakage
Screws/nuts on the
machine and on the
cutting means
Correctly tightened
(not loose)
Cooling air ducts Not clogged
Machine No signs of damage
or wear
6.2.2 Machine operating test
Action Result
1. Start the machine
(par. 6.3 );
2.
1. The cutting means
should move.
2. The lever should
return automatically
and rapidly to the
neutral position, the
motor must switch
means must stop
within a few seconds.
Test driving
If any of the results fail to match the
indications provided in the tables, do not use
the machine! Contact a service centre to have
it checked and repaired if necessary.
6.3 START-UP
NOTE Start up the machine on a at
surface without obstacles or high grass.
1. Open the hatch for accessing the
2.
3. Insert the safety key
4a.
4b.
5. and pull
the switch control lever.
6.4 OPERATION
IMPORTANT When working, always keep a safe distance
from the cutting means, given by the length of the handle.
IMPORTANT If the motor stops because it
becomes overheated during operation, you must
wait approximately 5 minutes before restarting it.
6.4.1 Grass cutting
1. Start moving forward and mowing the grass area;
2.
(par. 5.4) according to the lawn conditions
(grass height, density and humidity) and
3.
if the grass is always cut at the same height
For mulching or rear grass discharge:
• always avoid removing a large quantity of
grass. Never cut more than one third of the
•
EN - 8
6.4.2 Suggestions for maintaining a nice lawn
• To keep a lawn green and soft with a good appearance,
grass and roots grow more vigorously, forming a solid
grass and weeds start growing (clover and daisies,
•
approx. 4-5 cm and with one mowing, you do not need to
remove more than a third of the total height. If the grass
cutting height and the second cut at the height desired.
• If the cutting device are positioned too low,
•
little higher to prevent the ground from drying out.
•
not cut wet grass; this could reduce cutting means
•
sharpened so that the grass is cut straight without a
ragged edge that leads to yellowing at the ends.
6.4.3 Grass catcher emptying
and the lawn mower noise changes.
For grass catcher with contents indicator device:
1. Lifted = empty.
2. Lowered = full.
During operation, when the cutting means is moving,
the indicator stays lifted as long as the grass catcher
can collect the cut grass; when it is lowered, it means
that the grass catcher
1. release the switch lever and wait for the
cutting means to stop (par. 6.5);
2.
catcher, keeping it in upright position.
6.5 STOP
1.
2. Wait until the cutting means stops;
When you have stopped the machine, it will
take a few seconds for the cutting means to stop.
IMPORTANT Always stop the machine:
- when moving between work areas.
- when driving on grass free surface;
- every time it is necessary to overcome an obstacle;
- before adjusting the cutting height;
- any time the grass catcher is removed or retted;
- any time the side discharge chute (if
available) is removed or retted.
6.6 AFTER USE
1. Stop the machine (par. 6.5).
2. Open the hatch and remove the safety key.
3.
4.
storing in an enclosed space.
5. Clean (par. 7.3).
6. Make sure there are no loose or damaged
components. If necessary, replace the damaged
components and tighten any screws and loose
IMPORTANT Remove the safety key whenever the
machine is not used or when it is left unattended.
7. ROUTINE MAINTENANCE
7.1 GENERAL INFORMATION
The safety regulations to follow are
described in chap. 2. Strictly comply with these
instructions to avoid serious risks or hazards.
Before conducting any inspections,
cleaning or maintenance/adjustment
interventions on the machine:
• Stop the machine;
• Remove the safety key, (never leave
the key inserted or within the reach of
children or unauthorised persons);
• make sure that all moving parts have
come to a complete stop;
• allow the engine to cool before
storing in an enclosed space;
• read the relevant instructions;
• Use suitable clothing, protective
gloves and goggles.
• The frequency and type of procedures are outlined in the
your machine’s safety and performance. It summarises
• The use of non-genuine and/or incorrectly
•
Assistance Centres and Dealers.
This manual suits for next models
5
Table of contents
Other Mountfield Lawn Mower manuals
Mountfield
Mountfield 460R User manual
Mountfield
Mountfield SP536 User manual
Mountfield
Mountfield 4125M User manual
Mountfield
Mountfield 2L0536033/MC User manual
Mountfield
Mountfield SP 554 User manual
Mountfield
Mountfield 2105M User manual
Mountfield
Mountfield HP41 User manual
Mountfield
Mountfield SP474 User manual
Mountfield
Mountfield HP185 User manual
Mountfield
Mountfield SP555 User manual
Mountfield
Mountfield SP550 Combi User manual
Mountfield
Mountfield HP164 User manual
Mountfield
Mountfield HP180 User manual
Mountfield
Mountfield 2135H User manual
Mountfield
Mountfield HP454 User manual
Mountfield
Mountfield HP454 User manual
Mountfield
Mountfield HP185 User manual
Mountfield
Mountfield 550 SP TRI-CUT User manual
Mountfield
Mountfield SP51 User manual
Mountfield
Mountfield EP 414 User manual
