Mounting Dream MD5402-1 User manual

Please read this instruction carefully before installation.
MODEL：MD5402-1
INSTALLATION INSTRUCTION
Thank you for purchase!We strive to provide products and services of exceptional quality.
We sincerely invite you to write an unbiased review. For parts missed or installation problems,
please contact us at telephone [phone] (USA) Mon - Fri 10am - 6pm (Pacific time) or email
us by [e-mail] , so that we may solve the issue for you. (A0)
Weight capacity: 5 kg (11 lbs).

US WARNING!
安全警告:欢迎您选用空中视界音响架。为确保安全的使用MD5402-1型号产品，预防自身及其它
人员遭遇危险并防止财产受损，在使用前请仔细阅读此手册，如果您不理解这些说明或对安装
的安全性有任何疑问，请致电有资格的承包商或与空中视界客户服务部联系。组装前请仔细检
查以确保零件无缺少或缺陷，我们的客户服务代表会迅速为您的安装问题提供协助，以解决零
件的缺少或缺陷问题。通过授权经销商所购产品的替换零件将直接送货上门。切勿使用有缺陷
的零件，安装不正确可能会导致产品损坏或者身体严重受伤。切勿将本产品用于空中视界未明
示的任何其它目的，公司对于安装不正确、装配不正确或使用不当造成的产品损坏和身体受伤
不承担任何责任。
CN 警告!
ADVERTENCIA!
AVERTISSEMENT!
Safety Warning: Thank you for choosing Mounting Dream Speaker stand. For safe application of
model MD5402-1, and preventing yourself or others from danger or property loss, please read through
this manual before use. If you do not understand these instructions or have any doubt over safety of
installation, please contact qualified contractor or Mounting Dream customer service. Please check
carefully before assembly to ensure no parts missed or damaged. Our customer service representative
will assist you timely in installation to solve the issue of parts shortage or damage. Replacement parts
purchased through authorized distributor will be delivered to your door. Please do not use defective
parts. Incorrect installation may result in product damage or body injury. Do not apply this product to
any purpose not indicated by Mounting Dream. We shall bear no responsibility for any damage or
injury resulted from incorrect installation, incorrect assembly or misuse.
Avertissement de sécurité: Merci d'avoir choisi de montage support de rêve Président. Pour une application
sûre de modèle MD5402-1, et vous-même ou d'autres personnes prévenir du danger ou perte de biens, s'il
vous plaît lire ce manuel avant de l'utiliser. Si vous ne comprenez pas ces instructions ou avoir le moindre doute
sur la sécurité de l'installation, s'il vous plaît contacter entrepreneur qualifié ou montage service à la clientèle de
rêve. S'il vous plaît vérifier attentivement avant le montage afin d'assurer qu'aucune des parties manqués ou
endommagés. Notre représentant du service client vous répondra en temps opportun dans l'installation pour
résoudre la question de la pénurie de pièces ou de dommages. Les pièces de rechange achetées par le
distributeur agréé seront livrés à votre porte. S'il vous plaît ne pas utiliser les pièces défectueuses. Une
mauvaise installation peut entraîner des dommages matériels ou corporels du corps. Ne pas appliquer ce
produit à des fins non indiqué par Dream montage. Nous porterons aucune responsabilité pour tout dommage
ou blessure abouti à une mauvaise installation, l'assemblage ou une utilisation incorrecte.
Seguridad Advertencia: ¡Gracias por elegir el montaje soporte sueño altavoz ti. Para la aplicación segura de
modelo MD5402-1, y prevenir a sí mismo oa otros de peligro o pérdida de propiedad, por favor lea este manual
antes de usar. Si no entiende estas instrucciones o si tiene alguna duda sobre la seguridad de la instalación,
por favor póngase en contacto con el contratista calificado o montaje de servicio al cliente Sueño. Por favor,
revise cuidadosamente antes del montaje para asegurar sin piezas perdidas o dañadas. Nuestro representante
de servicio al cliente le ayudará a tiempo en la instalación para resolver el problema de la escasez o daño
partes. Los repuestos comprados a través de distribuidores autorizados serán entregados a su puerta. Por
favor, no utilice piezas defectuosas. La instalación incorrecta puede causar daños o lesiones cuerpo. No
aplique este producto a cualquier propósito no indicado por montaje sueño. Vamos a tener ningún tipo de
responsabilidad por los daños o lesiones causados por una incorrecta instalación, montaje incorrecto o mal
uso.
FR
ES

1
Band tape
2m Screwdriver Electrodrill
1/8"
For parts shortage or damage, please contact us directly by [e-mail].
New delivery will be timely arranged to replace missed or defective parts.
Attention:
A--Base
2 pcs
B--Bottom tube
2 pcs
C--Upper tube
2 pcs
H--M6X12 bolt 2pcs
2M2M
J-Fixed plate 2pcs
I--2 sets
I3--NutI2--Washer
I1--Horizontal bar
Installation tools:
Part list：
Hardware for stand assembly
Hardware for speaker assembly
S--M6 washer
4pcs
R--M5/M4
washer 4pcs
T--M4/M5/M6
spacer 4pcs
U--Plastic washer
4pcs
N--M4X30 bolt
4pcs
O--M5X30 bolt
4pcs
P--M6X30 bolt
4pcs
Q--M6X16 key
hole bolt 2pcs
M--Allen key 1pc
K--M6X10 bolt
8pcs
D--Brackets
2 pcs
L1--Acorn nut 2pcs L2--Washer 2pcs
L--2 sets V--Open-end wrench 1pc

2
B
Step 2 Insert upper tube (C) into bottom tube (B) and use Allen key (M) to
fasten bolt (K).
CM
K
Adjustable foot
M
K
A
Step 1 If the base is not level, please adjust the adjusting foot to level the
base. Insert bottom tube (B) into base (A),then fasten bolt (K) by using
Allen key (M) .

3
Step 4 Attach speaker to assembled stand
Option 1: Speaker installation hole distance is below
230mm/9in from the bottom
According to your speaker's installation hole, choose bolt N/O/P, spacer (T)
and plastic washer (U) ( as Figure 1 and Figure 2 shows) to attach it . Then plug
the wires.
N/O/P
T
Figure 1 Figure 2
For screw hole on flat
panel: Use bolt N/O/P,
spacer (T) and plastic
washer (U) to attach.
For inset hole: Use
bolt N/O/P and
spacer (T) to attach.
D
J
L1
L2
N/O/P
T
U
V
H
Step 3 Assemble the speaker attachment unit. Combine fixed plate (J) to
bracket (D) with acorn nut (L1) and washer (L2) by using open-end
wrench (V). Then fasten the speaker attachment unit to the upper
tube with screw (H).

4
Option 2: Speaker with a key hole
Attach key hole bolt (Q) to the assembled speaker attachment unit with washer
(U,I2) and nut (I3).
Place speaker on stand with key hole bolt (Q) inserted in the key hole, then tighten
the nut (I3) and plug the wires.
QUI3
I2

5
Assemble horizontal bar (I1) to the assembled speaker attachment unit with
washer (I2) and nut (I3).
Option 3: Speaker with two paralled installation holes
I1
I2
I3
According to your speaker's installation holes, choose bolt N/O/P, plastic
washer (U) ,washer R/S and spacer (T) ( as shows in Figure 3, Figure 4, Figure 5,
Figure 6 ) to attach it. Then plug the wires.
For screw holes on flat
panel: Use bolt N/O/P ,
spacer (T) and plastic
washer (U) to attach.
For inset holes: Use
bolt N/O/P, washer R/S
and spacer (T) to attach.
UT
Figure 3
UT
P
N/O
T
R
P
S
T
Figure 4
N/O
Figure 5
Figure 6

Product dimensions:
If you have any questions about the installation,please feel free to contact us at telephone [phone] (USA)
Mon - Fri 10am - 6pm (Pacific time) or email us by [e-mail] .
For more information,please visit our website:www.mountingdream.com
6
Use wood screws (NOT provided in the package) to mount the speaker. Mark
holes on bottom of speaker and drill holes, attach speaker onto speaker stand.
Option 4: Speaker with a wooden base and has no installation
holes at all.
Screwdriver
Electrodrill
100mm
1068mm
826mm
42mm
60mm 123mm