Mountup MU0060 User manual

01 02 03
Upper Holder
Wall Plate Down Holders
x2
x1 x2
Hardware Included
LM4-4
Philips
Screws
M4 x 30mm
Philips
Screws
M6 x 30mm
Philips
Screws
M8 x 30mm
x4 x4 x4
Spacers
L5mm
x8
Washers
Ø6mm
M4-5-6
x4
TV Screws / Washers
M-A M-B M-C M-G
Velcro Cable Ties ×3 Bubble Level ×1
INSTALLATION INSTRUCTION
Safety Caution
Must Check Before Getting Started
Installation Tools (Not Included)
Band
Tape
2M
Screwdriver
Hammer
MAX:400mm/16"
MAX:
Unrestricted Max:
(40KG)
88LBS
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please
contact us.
Philips
Screws
M4 x 40mm
Philips
Screws
M6 x 40mm
Philips
Screws
M8 x 40mm
x4 x4 x4
M-D M-E M-F
Thread screws by hand into the threaded holes on the back of your TV to select which screw
diameter fits your TV.
M6M4 M8
Step 1-2 Select TV screw length
(V1)
Please read this instruction carefully before installation.If you do not understand these instructions or have doubts
about the safety of the installation, assembly or use of this product, please contact us.
●This product is designed for use in drywall with / without wood stud. - DO NOT install into solid concrete wall.
●The wall must be capable of supporting five times the weight of the TV and mount combined.
● Incorrect installation may result in product damage or body injury.
Step 1-1 Select TV screw diameter
Horizontal × Vertical
Min: 100mm×100mm (4"×4")
Max: 400mm×Unrestricted (16"×Unrestricted)
Max:
(40KG)
88LBS
If you have any questions, please feel free to contact Customer Service via Amazon before returning.
CAUTION:
DO NOT install into concrete or brick.
DO NOT mount to patched areas/ drywall
seams/uneven walls.
Drywall must be of sound construction with
no water damage.
<16mm(5/8")
Drywall with / without wood studs
Hardware（Wall）
Nail 5/64 x 1 3/16 in
x23
A
Correct Correct
12
CorrectCorrect

Measure and note the width of the square
or rectangle formed from the VESA holes
pattern .
Step 2 Measure your TV pattern
W
2M2M
100mm ≈4in.
200mm ≈8in.
300mm ≈11 3/4in.
400mm≈16in.
Step 4 Wall plate installation (for drywall with /without stud)
Step 3 Attach the bracket
Product dimensions:
300mm/12”
100/4”
400mm/16”
200/8“
unrestricted
M-A
Use the shorter screws
M-B
M-C
Not for M8 screws
(b) For Round Back / Extra Space
(a) For Flat Back
Top of TV
M-D
Use the longer screws
M-F
M-E
Top of TV
M-G
02
Not for M8 screws
M-G
M-G
Washers
Washers
Spacers
03
02
03
Pay attention to the direction�
Pay attention to the direction�
3 4
27mm /1.06”
Position the wall plate at your desired height and secure it with the all nails total 23pcs.
01 A
!Wall plate MUST be level
when securing the nails.�
x23
A
Alternate installing all the nail holes from side to side.�
!
UP
LIFT
Step 5 Lift and hang TV with bracket onto wall bracket
Adding cables before hanging the TV onto wall plate.
Hang the TV by securing the Upper Holders 02 onto the wall plate.
02