Move SINGLE User manual
2
MOVE SINGLE - Installation guide
1. Desk clamp (1PC)
2. Anti-slip mat (1PC)
3. Anti-slip ring (1PC)
4. Grommet support (1PC)
5. Anti-slip pad (2PCS)
6. Grommet support-washer (1PC)
7. Screw (1PC)
8. Butterfly nut (1PC)
Tool required
1.Desk clamp(1PC)
2.Anti-slip mat (1PC)
3.Anti-slip ring (1PC)
4.Grommet support(1PC)
5.Anti-slip pad (2PCS)
6.Grommet support-washer(1PC)
7.Screw(1PC)
8.Butterfly nut(1PC)
This product contains small items that could be a choking hazard if swallowed.Keep these items away from young children.
● Make Sure these instructions are read and completely understood before attempting
installation.If you are unsure of any part of this installation,please contact a professional installer
for assistance.
● The desk or mounting surface must be capable of supporting the combined weight of the mount
and the display,otherwise the structure must be reinforced.
● Please check joint parts every two months,making sure the screws are loosened or not.
This product was designed to be installed on desk. Before installing, make sure the mount will support the combined load of the
equipment and hardware. Never exceed the maximum load capacity 9 KG,or else it may result in product failure or personal
injury.
Note: this product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
CAUTION
This marking indicates that this product should not
be disposed with other household wastes. To
prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmental safe recycling.
Waste disposal
Item No.:DLB902-UK175
Installation guide
1.Desk clamp(1PC)
2.Anti-slip mat (1PC)
3.Anti-slip ring (1PC)
4.Grommet support(1PC)
5.Anti-slip pad (2PCS)
6.Grommet support-washer(1PC)
7.Screw(1PC)
8.Butterfly nut(1PC)
This product contains small items that could be a choking hazard if swallowed.Keep these items away from young children.
● Make Sure these instructions are read and completely understood before attempting
installation.If you are unsure of any part of this installation,please contact a professional installer
for assistance.
● The desk or mounting surface must be capable of supporting the combined weight of the mount
and the display,otherwise the structure must be reinforced.
● Please check joint parts every two months,making sure the screws are loosened or not.
This product was designed to be installed on desk. Before installing, make sure the mount will support the combined load of the
equipment and hardware. Never exceed the maximum load capacity 9 KG,or else it may result in product failure or personal
injury.
Note: this product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
CAUTION
This marking indicates that this product should not
be disposed with other household wastes. To
prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmental safe recycling.
Waste disposal
Item No.:DLB902-UK175
Installation guide
12
3
4
5
6
7
8
3
MOVE SINGLE - Installation guide
Desk Clamp
Tighten
Tabletop
Adaptable tabletop thickness
20-25mm Tabletop
Through Desk Mounting
Attaching Monitor
Cable Management
Tabletop
on actual situation
After using, please put
the 4X4 Allen key(E)
here for storage.
To adjust the swivel function use
5x5 allen key(F) on position 1
To adjust the tilt function use
5x5 allen key(F) on position 2
Choose use washer(D) based
Cable
Tabletop
After installation, In case of display rising or dropping
automatically, please use 4x4MM allen key (E) tighten the
screw in the direction of " " to increase the friction with
display stopping normally . If you feel hard in using after
stopping of display, tighten the screw in the direction of
" " to release the friction.
Desk clamp
Through desk mounting
Attaching monitor
4
MOVE SINGLE - Installation guide
Desk Clamp
Tighten
Tabletop
Adaptable tabletop thickness
20-25mm Tabletop
Through Desk Mounting
Attaching Monitor
Cable Management
Tabletop
on actual situation
After using, please put
the 4X4 Allen key(E)
here for storage.
To adjust the swivel function use
5x5 allen key(F) on position 1
To adjust the tilt function use
5x5 allen key(F) on position 2
Choose use washer(D) based
Cable
Tabletop
After installation, In case of display rising or dropping
automatically, please use 4x4MM allen key (E) tighten the
screw in the direction of " " to increase the friction with
display stopping normally . If you feel hard in using after
stopping of display, tighten the screw in the direction of
" " to release the friction.
Cable management
5
MOVE SINGLE - Installation guide
This product contains small items that could be a choking hazard
if swallowed. Keep these items away from young children.
• Make sure these instructions are read and completely understood
before attempting installation. If you are unsure of any part of this
installation, please contact a professional installer for assistance.
• The desk or mounting surface must be capable of supporting
the combined weight of the mount and the display, otherwise
the structure must be reinforced.
• Please check joint parts every two months, making sure the
screws are loosened or not.
This product was designed to be installed on desk. Before installing,
make sure the mount will support the combined load of the equipment
and hardware. Never exceed the maximum load capacity 9KG, or else it
may result in product failure or personal injury.
Note: this product is intended for indoor use only. Use of this product
outdoors could lead to product failure or personal injury.
Safety
This marking indicates that this product should not be disposed with other household wastes. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
