Vivo STAND V101 User manual

  
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
 
phillips screwdriver
 
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- -   !" 
 (x1)
VES Plate
# (x1)
rm
 (x1)
“ C Clamp
 (x2)
Pole
$ (x1)
Cable Clip
% (x1)
Grommet Base
& (x5)
Rubber Pad
' (x3)
Bolt
( (x1)
Support Plate
) (x1)
humb Screw
* (x1)
4mm lle% Key
+ (x1)
6mm lle% Key
 (x1)
Pole Cap
-  (x4)
M4x12
- # (x4)
M4x16
-  (x4)
M5x12
-  (x4)
M5x16
- $ (x4)
D5
- % (x4)
Spacer

",- 
 
M
D
Attach pole cap (M) to top of pole (D).
 .
Stick soft pads (G) to the underside of clamp (C). Attach pole (D) to
clamp (C) using bolts (H). Tighten using 4mm allen key (K). Attach
clamp (C) to desktop.
/  01 " (
K
H
C
G
D
10-88mm
2
 . 23
/ # &"" # (
For grommet hole mounting, remove screw in top of bolt on clamp
(C). Stick soft pads (G) to bottom of grommet base (F). Attach
grommet plate (I) to bolt and run through grommet hole into
grommet base (F) and thread into pole (D) as shown in diagram.
 4
C
G
F
I
D
Slide cable management clip (E) and arm (B) onto pole (D) and
tighten using 6mm allen key (L).
B
D
E
L

3
 5
Adjust tension in monitor bracket with 6mm allen key (L).
 6
Route cables through cable management clips.
L
 7
/  % # 
Attach VESA plate (A) to monitor using bolts (M-A) or (M-C) and
washers (M-E).
/ #   # 
Attach VESA plate (A) to monitor using bolts (M-B) or (M-D), washers
(M-E), and spacers (M-F).
 8
Slide VESA plate (A) into bracket on arm (B) and secure using thumb
screws (J) as shown in diagram.
M-A
M-C
M-E
A
M-B
M-D
M-E
M-F
A
J

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
9- :
  
Last updated: 0 /22/18
 ;
Store allen key (L, K) in cable management clip (E) for future
adjustments.
<  
180 °
+45°
-45°
180 °
360 °
360 °
K
L
4