Moving Air 10" FSe2 User manual

8” & 10” e²Subwoofer Installation Manual

8” FS e²Subwoofer Installation Guide

8” Subwoofer Installation with Passive Radiator
• Recommended Cube Enclosure of outer dimension
of 250mm x 250mm x 250mm using 15mm (min.) to
25mm thick MDF board.
• Box internal Volume needed is 8 (mins) to 10 liters
(+/-10%).
• Drivers Should be mounted back to back as shown
below.
250mm
250mm
250mm
Ø 182mm
Passive Radiator
Cut Diameter
Ø 180mm
8” Subwoofer Driver
Cut Diameter
250mm
250mm

8” Subwoofer Driver Dimension

8” Passive Radiator Dimension

10” FS e²Subwoofer Installation Guide

10” FS Subwoofer Installation with Passive Radiator
• Recommended Cube Enclosure of outer dimension
of 300mm x 300mm x 300mm using 15mm (min.)to
25mm thick MDF board.
• Box internal Volume needed is 15.6 (min.) to 19.6
liters (+/-10%).
• Drivers Should be mounted back to back as shown
below.
300mm
300mm
300mm
Ø 226mm
Passive Radiator
Cut Diameter
Ø 233mm
8” Subwoofer Driver
Cut Diameter
300mm
300mm

10” e Subwoofer Driver Dimension

10” e Passive Radiator Dimension