MQ Whiteman WM-700S User manual

© COPYRIGHT 2001, MULTIQUIP INC.
PARTS AND OPERATION MANUAL
PLASTER / MORTAR MIXERS
WM-700S
WM-700P
Revision #7 (06/26/01)
Go to Discount-Equipment.com to order your parts

Discount-Equipment.com is your online resource for quality parts & equipment.
Florida: 561-964-4949 Outside Florida TOLL FREE: 877-690-3101
Need parts?
Click on this link: http://www.discount-equipment.com/category/5443-parts/ and
choose one of the options to help get the right parts and equipment you are looking
for. Please have the machine model and serial number available in order to help us
get you the correct parts. If you don’t find the part on the website or on one of the
online manuals, please fill out the request form and one of our experienced staff
members will get back to you with a quote for the right part that your machine needs.
We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman,
Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,
Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack,
Lull, Skytrak, Tsurumi, Husquvarna Target, Stow, Wacker, Sakai, Mi-T-M, Sullair, Basic,
Dynapac, MBW, Weber, Bartell, Bennar Newman, Haulotte, Ditch Runner, Menegotti,
Morrison, Contec, Buddy, Crown, Edco, Wyco, Bomag, Laymor, EZ Trench, Bil-Jax, F.S.
Curtis, Gehl Pavers, Heli, Honda, ICS/PowerGrit, IHI, Partner, Imer, Clipper, MMD, Koshin,
Rice, CH&E, General Equipment ,Amida, Coleman, NAC, Gradall, Square Shooter, Kent,
Stanley, Tamco, Toku, Hatz, Kohler, Robin, Wisconsin, Northrock, Oztec, Toker TK, Rol-Air,
APT, Wylie, Ingersoll Rand / Doosan, Innovatech, Con X, Ammann, Mecalac, Makinex, Smith
Surface Prep,Small Line, Wanco, Yanmar

PAGE 2 —WHITEMANWM-700S,700P — PARTS & OPERATION MANUAL — REV. #7 (06/21/01)
Go to Discount-Equipment.com to order your parts

PAGE 4 —WHITEMANWM-700S,700P —PARTS & OPERATION MANUAL —REV.#7 (06/21/01)
TABLE OF CONTENTS
Here's how To Get Help .......................................... 3
Table Of Contents ...................................................4
Parts Ordering Procedures .....................................5
Rules for Safe Operation & Safety Decals.............. 6
Warranty.................................................................. 7
WHITEMAN — 700S & 700P
Operations ......................................................... 8-10
Specifications ........................................................ 11
Explanation Of Codes In Remarks Column .......... 12
Suggested Spare Parts......................................... 13
Drum Head & Paddle Shaft Assembly ............. 14-15
Steel Drum (S) ................................................. 16-17
Polyethylene Drum (P) ..................................... 18-19
Gas Engines, Pulleys & Cab Assembly............ 20-21
Electric Motor & Pulleys ................................... 22-23
Axle & Wheel Group......................................... 24-25
Terms and Conditions Of Sale —Parts ................ 26
Go to Discount-Equipment.com to order your parts

PAGE 6 —WHITEMANWM-700S,700P —PARTS & OPERATION MANUAL —REV.#7 (06/21/01)
RULES FOR SAFE OPERATION & SAFETY DECALS
The safety instruction decal is P/N 924801
SAFETY INSTRUCTIONS
1. Read owners manuals before operating.
2. Keep unauthorized and untrained people away from machine during operation.
3. Make sure all safety devices are in place before this machine is started.
4. Make sure engine is turned off and spark plug wire is disconnected before cleaning the
machine.
5. Keep hands and fingers away from moving objects.
6. Do not operate machine in an enclosed area. Proper ventilation is required.
7. Never leave machine unattended when operating.
8. Always stop engine and allow engine to cool before adding fuel or oil.
WHITEMAN CONCRETE PRODUCTS  A MULTIQUIP COMPANY  CARSON, CALIFORNIA
■ Do not operate or service this equipment
beforereadingtheoperatingandmaintenance
instructions manual or serious injury may
result.
■ Do not operate this equipment unless all
guards and safety devices are attached and
in place.
■ Stop the engine when leaving the
equipment.
■ Block the unit when leaving or when using
on a slope
■ Maintain thisequipmentinasafeoperating
condition at all times.
■ Cautionmust be exercisedwhileservicing
thisequipment.Rotatingandmovingpartscan
causeinjuryif contacted.
■ Stop the engine before servicing, adding
fuel and oil.
■ When towing, an adequate safety chain
mustbefastenedtotheframe,refertopage 9.
■ Keep all inexperienced and unauthorized
peopleawayfromtheequipmentatalltimes.
■ Unauthorizedequipmentmodificationswill
voidallwarranties.
■ Checkallfastenersperiodicallyfortightness.
Also check towing tongue bolt, lock nut and
wheel lug nuts for wear.
■ Wear safety glasses at all times when
workingaroundmachinery.
■ Stop the engine and disconnect the spark
plug before allowing anybody’s hands in the
mixingdrum.
■ Never pour or spray water over the engine
orelectricmotor.
■ Always stand clear of dump handle when
mixer is in operation. Any binding of material
betweenthemixerbladesand drumwillcause
drum and handle to quickly move in the
dischargeposition.
The safety instruction decals shown must be on all Whiteman Mixers
Caution Decal is:
P/N EM948423
CAUTION!CAUTION!
CAUTION!CAUTION!
CAUTION!
SHUT OFF ENGINE BEFORESHUT OFF ENGINE BEFORE
SHUT OFF ENGINE BEFORESHUT OFF ENGINE BEFORE
SHUT OFF ENGINE BEFORE
PUTTING HANDS IN MIXING DRUMPUTTING HANDS IN MIXING DRUM
PUTTING HANDS IN MIXING DRUMPUTTING HANDS IN MIXING DRUM
PUTTING HANDS IN MIXING DRUM
Go to Discount-Equipment.com to order your parts

WHITEMANWM-700S,700P—PARTS&OPERATIONMANUAL—REV. #7 (06/26/01) —PAGE 7
WARRANTY
Thereare nowarranties,expressorimplied,madeby Multiquip
Inc. hereunder on Products manufactured or distributed by it
exceptthewarrantyagainstdefectsinmaterialandworkmanship
on new Products to the original purchaser, as hereinafter set
forth.
Multiquip Inc. warrants Products manufactured by it to be free
from defects in material and workmanship under normal and
properuseand servicingforthe periodsspecifiedon thebottom
ofthis page.Warrantyontheenginessuppliedwith theProducts
islimitedtothe warrantyextendedbytheenginemanufacturer.
MultiquipInc.’soleobligationunderthiswarrantyislimitedtothe
replacement or repair, at its Carson, California facility, or such
authorized facility, of only such part or parts thereof as shall
appeartoMultiquipInc.upon inspection at such facility,tohave
been defective in material and workmanship.
Astatement givingmodelandserialnumberoftheProduct,date
of sale to original purchaser and date and description of failure
shall accompany all parts.
Anypart orpartsdeterminedbyMultiquipInc.tobe defective will
bereplacedfreeof charge,F.O.B.Carson,California.Returned
parts subject to warranty must be shipped prepaid to Multiquip
Inc.within30 daysfrom thedatethe defective partor partswere
removed.Thiswarrantydoesnotapplytoanypartorpartswhich
have been subject to abuse or unauthorized repairs
WarrantywithrespecttoProducts,componentsandaccessories
not manufactured by Multiquip Inc. is limited to the warranty
extendedbythe manufacturerofthoseitems.
There are no warranties, express or implied, in addition to the
above except as may be provided in writing by Multiquip Inc.
MULTIQUIPINC.SHALLNOTBELIABLEFORANYSPECIAL,
INDIRECTORCONSEQUENTIAL DAMAGES.
THEFOREGOINGWARRANTIESAREINPLACEANDINLIEU
OF ALL WARRANTIES OF MERCHANTABILITY AND
FITNESS AND SETS FORTHTHE ENTIRE OBLIGATION OF
MULTIQUIP INC.
To avoid misrepresentations with respect to Products sold
hereunder, the Dealer agrees that no warranties, or other
operatingguarantiesonanyProductscoveredbythisAgreement
shall be made in excess of those made by Multiquip Inc.
Multiquip Inc. Warranty Periods:
WM-700 ........................ 12months
Go to Discount-Equipment.com to order your parts

PAGE 8 —WHITEMANWM-700S,700P —PARTS & OPERATION MANUAL —REV.#7 (06/21/01)
WM-700S, 700P —OPERATIONS
GENERAL
TheWhitemanWM-700andWM-900Seriesplasterandmortar
mixersarequality mixers thathaveabatch capacity of2.5and
3.5bagsrespectively.Withpropercare,theywillgivecontinuous
serviceyear-after-year.
BEFORE STARTING
Before starting the engine, read the engine owners manual
and thoroughly understand the safety information.
Check the items listed below:
Oil Levels. Be sure to check the oil levels in the engine and
engine reduction unit before starting the unit.
Hardware. Check all hardware on the mixer before starting.
Periodically inspect all hardware. Loose hardware can
contribute to early component failure and poor performance.
Use the torque chart below as a general guideline and keep
all hardware tight:
HARDWAREDIA TORQUE(LB./FT.)
%/16 "-18 14
#/8" -16 24
#/8" - 24 37
½" - 13 39
½" - 13 (Grade 8) 90
GASOLINE ENGINE CARE
For care and operation of the gasoline engine, refer to the
engine manufacturer’s operating instructions furnished with
the engine. We recommend draining and refilling the engine
crankcase at least every thirty hours of operation. Check the
engine oil level daily.
Refertothe following chart.Forrecommendplug sizes.
CONTROLS
KILL SWITCH: (Gasoline Engine Only)Locatedonthe side of
the engine cover.
ENGINETHROTTLE ANDCHOKE CONTROLS: Pleaserefer
to the engine owners manual for specific instructions. The
electricmotorswitch (electricmotoronly) locatedonthe motor
—is used to start and stop the mixer.
DUMP LATCH: To dump the tub, grasp the dump handle and
lift the dump latch, then rotate the tub to discharge the mix.
After, discharge, return thetubto the vertical mixingposition.
ROTOM Ø1TLOV511 007MW Ø1TLOV032 009MW
ESROH REWOP
PACLIATGIP /AMEN NAMETIHW YDOBNNOC /AMEN NAMETIHW PACLIATGIP /AMEN NAMETIHW YDOBNNOC /AMEN NAMETIHW
PH3&½1545049/P03-5L645049/R03-5L055049/P51-6L155049/R51-6L
CLUTCH
The paddle shaft and mixing blades are engaged and
disengaged by tightening and loosening the drive belts with a
springloaded idlerpulley.Toengagetheclutch,rotate thelever
counterclockwise.The springmaintainsthecorrectbelttension.
Todisengage the clutch, rotate the lever clockwiseagainstthe
leverstop.Theenginebaseisslottedto adjustforbeltwearand
to bring the idler pulley into operating range.
CAUTION: Stop the engine before allowing anybody to put
their hands in the mixing drum.
WHEEL BEARINGS
Afterevery3monthsofoperation,removethehubdustcapand
inspect the wheel bearings. Once a year, or when required,
disassemblethe wheelhubsremovetheoldgreaseandrepack
the bearings forcing grease between rollers, cone and cage
with a good grade of high speed wheel bearing grease (never
usegreaseheavierthan265 A.S.T.M.penetration(“No.2.”)Fill
the wheel hub with grease to the inside diameter of the outer
races and also fill the hub grease cap. Reassemble the hub
and mount the wheel. Then tighten the adjusting nut, at the
same time turn the wheel in both directions, until there is a
slight bind to be sure all the bearing surfaces are in contact.
Thenback-offthe adjustingnut
!/6 to¼turn ortothe nearest
locking hole or sufficiently to allow the wheel to rotate freely
withinlimitsof.001"to.010"endplay.Lockthenutatthisposition.
Install the cotter pin and dust cap, and tighten all hardware.
ELECTRIC MOTOR CARE
Forlubrication careandoperationof theelectric motor,referto
yourelectricmotorinstructionbookletfurnishedwiththemotor.
Protect the electric motor from dust as much as possible and
keep ventilating openings clean. Do not spray water on the
electricmotor.
Go to Discount-Equipment.com to order your parts

WHITEMANWM-700S,700P—PARTS&OPERATIONMANUAL—REV. #7 (06/26/01) —PAGE 9
WM-700S, 700P —OPERATIONS
BEARING BRACKET
Greasethebearingbracket every month.
COUNTERSHAFT
The countershaft rotates on two self-aligned pillow block
bearings. Grease these every 40 hours using grade #1 Lithium
Basegrease.
GEAR ALIGNMENT
The countershaft and driven pinion are mounted on a slotted
base.Toalign gears,loosenthepillowblockmounting boltsand
move them until the necessary alignment has been made.
GEAR LUBRICATION
The surface of the pinion and the bull gear
shouldbeverylightlygreasedevery250hours.
IMPORTANT! AVOID OVER-GREASING.
EXCESS GREASE WILL ACCUMULATE
CONTAMINATESAND CAUSEPREMATURE
WEAR.
IMPORTANT —DRUM HEAD SEAL CARE
Greasesealsevery40hoursofoperationusing
any grade #1 lithium base grease. Apply
grease until visible inside of mixing tub
(overgrease). This will purge seal system of
contamination.
DRUM GRILL
The drum opening is covered by a steel grill that is hinged for
easycleaning.Thisgrill shouldbeclosedatalltimeswhenmixer
is in use. Do not remove the grill or grill opening bar. Keep the
grill clean by washing it down daily.
CAUTION:Stop theenginebeforeallowinganybodytoputtheir
hands in the mixing drum.
TOWING —Before towing, check with local and state
laws for proper compliance.
The tow bar and chain must be properly attached to the mixer
and towing vehicle prior to towing. Refer to the following
installationinstruction:
Step 1. InserttheDrawBarintothemainframe.Secure,utilizing
the¾"bolt(grade5) andnylocknut.Tightento 100footpounds.
Step 2. Install the chain through the hole located between the
framegussetandframeangle.Loopthechaintogetherandplace
undertheDrawBar.Securewithconnectorlink.
Step 3. Extend the chain along the length of the Draw Bar,
remove excess chain (slack) and secure to bottom connector
link.Securethe chaintothe towingvehicle,usingthe connector
link.
NOTE: Itiscriticalthatthelengthofchainbe properlyadjusted
topreventtheDraw Bar andfrontmixerstandfrom
droppingtotheground (contact) in theeventtheDraw
Barbecomesdisconnectedfrom the towingvehicle.
BOLT & NUT
DRAW BAR
STEP 1
VEHICLE
CONNECTORLINK
CONNECTORLINK
FRAME ANGLE
FRAME GUSSET
INSERT CHAIN THROUGH
THE HOLE
DRAW BAR
BOTTOM CONNECTOR LINK
REMOVE EXCESS
CHAIN (SLACK)
STEP 3
STEP 2
DRAW BAR
SAFETY CHAIN .........................................P/N13363
CONNECTOR LINK ...................................P/N01004
Go to Discount-Equipment.com to order your parts

PAGE 10 —WHITEMANWM-700S,700P —PARTS & OPERATION MANUAL —REV.#7 (06/21/01)
END SCRAPER
WM-700S, 700P —OPERATIONS
BALL HITCH COUPLER
1. Checkvehiclehitch, ball, andcouplerforsigns of wearor
damage. Replace any parts that are worn or damaged
beforetowing.
2. Useonlythe2"balldiameteras indicatedonyourcoupler.
Use of any other ball diameter will create an extremely
dangerousconditionwhich canresultinseparation ofthe
coupler and ball or ball failure.
3. Be sure the coupler is secured to the hitch ball and the
lock lever is down tight and locked.
Recheck tightness again after towing about 50 miles.
4. Checkthattrailer safety chainsareproperlyconnected.
DANGER If housing is deformed,
replace complete coupler.
USE ONLY GENUINE
FULTON REPAIR KITS.
DANGER BEFORETOWING
RECOMMENDEDMAINTENANCE
1. Smear ball socket and clamp face with chassis grease.
Periodically oil pivot points and solutions surfaces of
couplerwithSAE 30 wt.motoroil.
2. When parking or storing your trailer.Keep the coupler off
the ground so dirt will not build up in the ball socket.
CLEANING —BLADE ADJUSTMENTS
Alwaysdisconnectthesparkplugwirebeforecleaningtheinside
ofthedrum.
Never pour or spray water over the gasoline engine or electric
motor.
For consistent performance, long life and high quality mixing,
thoroughly clean the mixer inside and out at the end of each
day’s operation.To prevent lumps of dried mortar from forming
and contamination of future batches, do not allow a buildup of
materials to form on the blades or anywhere inside the drum.
SIDE SCRAPER
2) POLYETHYLENE DRUM MIXERS
Thepolyblade should comeascloseas possible tothesurface
withouttouching.If materialbuildsup onthedrum, youmayuse
arubbermallettodislodge thematerialwithoutadverseeffect to
thedrum.
IMPORTANT NOTICE
EPOXYCOMPATIBILITY —Therearesomeexpoxiesandother
chemicals used in certain applications that are not compatible
withpolyethylenetubs.
Since Whiteman Industries cannot control the end user’s
applicationofthisproduct,wewillnotassumeresponsibilityfor
theresultingdamageswhenexposedtoincompatiblechemicals.
The following is the recommended wiper blade adjustments:
1) STEEL DRUM MIXERS
Go to Discount-Equipment.com to order your parts

WHITEMANWM-700S,700P—PARTS&OPERATIONMANUAL—REV. #7 (06/26/01) —PAGE 11
WM-700S, 700P —SPECIFICATIONS
WM-700S SPECIFICATIONS
MODEL U.S.(inch) METRIC
CAPACITY ....................................................7 CUBIC FEET ....................................................... 198 LITERS
BAG CAPACITY .............................................1½- 2½............................................................ 1½- 2½
WEIGHT (appROX.).......................................788 LBS. ............................................................. 357 KG.
L XW XH ..................................................71 X50 X56 IN. .................................................. 180 X127 X142 CM.
LENGTH W/TOW BAR ......................................98 IN. ................................................................. 248 CM.
HEIGHT W/DUMP HANDLE ................................73 IN. ................................................................. 185 CM.
DISCHARGE HEIGHT .......................................21 IN. ................................................................. 53 CM.
DRIVE .........................................................V-BELT TO GEAR ..................................................... —
DUMP ACTION ..............................................MANUAL ............................................................... —
WM-700P SPECIFICATIONS
MODEL U.S.(inch) METRIC
CAPACITY ....................................................7 CUBIC FEET ....................................................... 198 LITERS
BAG CAPACITY .............................................1½- 2½............................................................ 1½- 2½
WEIGHT (APPROX.) ........................................788 LBS. ............................................................. 357 KG.
L XW XH ..................................................71 X50 X56 IN. .................................................. 180 X127 X142 CM.
LENGTH W/TOW BAR ......................................98 IN. ................................................................. 248 CM.
HEIGHT W/DUMP HANDLE ................................73 IN. ................................................................. 185 CM.
DISCHARGE HEIGHT .......................................21 IN. ................................................................. 53 CM.
DRIVE .........................................................V-BELT TO GEAR ..................................................... —
DUMP ACTION.............................................MANUAL .............................................................. —
Go to Discount-Equipment.com to order your parts

PAGE 12 —WHITEMANWM-700S,700P —PARTS & OPERATION MANUAL —REV.#7 (06/21/01)
EXPLANATION OF CODE IN REMARKS COLUMN
How to read the marks and remarks used in this parts book.
Section 1: Items Found In the “Remarks”Column
Serial Numbers-Where indicated, this indicates a serial
number range (inclusive) where a particular part is used.
Model Number-Where indicated, this shows that the
corresponding part is utilized only with this specific model
number or model number variant.
Section 2: Items Found In the“Remarks”Column
SerialNumbers-Whereindicated, thisindicatesa serialnumber
range (inclusive) where a particular part is used.
Model Number-Where indicated, this shows that the
correspondingpartisutilizedonlywiththisspecificmodelnumber
ormodel number variant.
Section 3: Items Found In the“Items Number”Column
Allpartswithsame symbol inthenumbercolumn, *, #,+,%, or
■
,belongtothesameassemblyorkit.
Note: If more than one of the same reference number is listed,
the last one listed indicates newest (or latest) part available.
NOTE
If more than one of the same reference number is
listed,the lastonelisted indicatesnewest(orlatest)
part available.
NOTE
The contents of this catalog are
subjecttochangewithoutnotice
.
Go to Discount-Equipment.com to order your parts

WHITEMANWM-700S,700P—PARTS&OPERATIONMANUAL—REV. #7 (06/26/01) —PAGE 13
WM-700S, 700P —SUGGESTED SPARE PARTS
WM-700S/P
1 to 3 Units
Qty. P/N Description
3 ......... EM505834 ........... V-BELT
3 ......... EM507846 ........... V-BELT, WM-700 ELECTRIC MOTOR
6 ......... 491010 ................ LATCHASSY
3 ......... EM203010 ........... BLADE KIT STEEL DRUM
3 ......... EM204624 ........... BLADE KIT POLY DRUM
2 ......... EM902153 ........... BEARING, DRUM HEAD
2 ......... 3131 .................... O-RING, DRUM HEAD
2 ......... 3530 .................... SEAL KIT
1 ......... 3351 .................... PINIONGEAR
WM-700S/P
5+ Units
Qty. P/N Description
5 ......... EM505834 ........... V-BELT
5 ......... EM507846 ........... V-BELT, w/ELECTRIC MOTOR
10 ....... 491010 ................ LATCHASSY
5 ......... EM203010 ........... BLADE KIT STEEL DRUM
5 ......... EM204624 ........... BLADE KIT POLY DRUM
4 ......... EM902153 ........... BEARING, DRUM HEAD
4 ......... 3131 .................... O-RING, DRUM HEAD
1 ......... EM940734 ........... SWITCH, ON/OFF
2 ......... 3351 .................... DRIVEN PINON GEAR
1 ......... EM500083 ........... DUMP HANDLE, POLY DRUM
1 ......... EM201537 ........... DUMP HANDLE, STEEL DRUM
4 ......... 3530 .................... SEAL KIT
2 ......... 3065 .................... SEAL,AXLE
2 ......... 3469 .................... DUST CAP AXLE
2 ......... EM903049 ........... BEARING CONE UP TO S/N HL60000
2 ......... EM903113 ........... BEARING CONE STARTING S/N JA00000
2 ......... EM903012 ........... BEARING CUP
NOTE
Part numbers on this Suggested
Spare Parts List may supercede/
replace the P/N shown in the text
pages of this book.
Go to Discount-Equipment.com to order your parts

PAGE 14 —WHITEMANWM-700S,700P —PARTS & OPERATION MANUAL —REV.#7 (06/21/01)
WM-700S, 700P —DRUM HEAD AND PADDLE SHAFT ASSY
PADDLE SHAFT ASSEMBLY
TOW END
DRUM HEAD
28
27
26
25
Go to Discount-Equipment.com to order your parts

WHITEMANWM-700S,700P—PARTS&OPERATIONMANUAL—REV. #7 (06/26/01) —PAGE 15
WM-700S, 700P —DRUM HEAD AND PADDLE SHAFT ASSY
DRUM HEAD & PADDLE SHAFT ASSEMBLY
DRUM HEAD
NO. PART NO. PART NAME QTY.REMARKS
2 EM200297 U-BOLT 2
EM968011 NUT HEX ½-13 4
3 EM200292 U-BOLT INSERT 4
4 3249 DUST CAP ............................................................................... 1 ................. REPLACES 50017
5 EM902153 BEARING 2
6 EM507720 BRACKET, DUMP BEARING ................................................... 2................. STARTING S/N 750180
6 500076 BRACKET, DUMP BEARING ................................................... 2 ................. S/N 750000 THRU 750105
7 EM916019 GREASE ZERK........................................................................ 2 ................. REPLACES 491705
8 5028 B COTTER PIN 1/8 X 2............................................................... 2 ................. REPLACES 491690
9 8164 CASTLE NUT .......................................................................... 2 ................. REPLACES 502246
10 3047 SPACER................................................................................... 2 ................. REPLACES 500089
11 3131 O-RING .................................................................................... 2 ................. REPLACES 491040
12*13002 SEAL ........................................................................................ 2 ................. REPLACES 504749
13 507719 DRUM HEAD, BEARING BOSS ............................................... 2 ................. STARTING S/N 750180
13 3291 DRUM HEAD, BEARING BOSS ............................................... 2 ................. S/N 750000, THRU 750105
REPLACES 500085
14 3024 SPRING ................................................................................... 2 ................. REPLACES 491930
15 3061 THIN SEAL SPACER ............................................................... 14 ............... REPLACES500088
29*3019 SEAL ........................................................................................ 4 ................. REPLACES 500086
30*3494 SEAL URETHANE ................................................................... 2................. REPLACES 500613
3530 SEAL KIT, PADDLE SHAFT ..................................................... 1 ................. INCLUDES ITEMS w/*
PADDLE SHAFT ASSEMBLY
NO. PART NO. PART NAME QTY.REMARKS
1 EM507269 PADDLE SHAFT 1
16 EM202899 PADDLE ARM-TOW END 1
17 EM202897 PADDLE ARM-CENTER 1
18 EM202898 PADDLE ARM-ENGINE END 1
19 EM202896 PADDLE ARM-CENTER 1
20*# EM202928 TOP STEEL BLADE 4
21*# EM202927 DRUM END STEEL BLADE 2
22*EM202929 TOP RUBBER BLADE (STEEL) DRUM ONLY 4
22# EM507497 TOP PLASTIC BLADE (POLY) DRUM ONLY 4
23# EM507496 DRUM END PLASTIC BLADE (POLY) DRUM ONLY 2
23*EM202926 DRUM END RUBBER BLADE (STEEL) DRUM ONLY 2
25 EM963110 BOLT ½-13 X 3 ¾1
26 6109180 LOCKWASHER ½................................................................... 1................. REPLACESEM923638
27 EM968011 HEX NUT 1/2-13...................................................................... 1
28 507270 SPACERBULL GEAR 1
EM203010 BLADE KIT, (STEEL) DRUM ONLY.......................................... 1................. INCLS w/*AND MTG.& HDWR
EM204624 BLADEKIT, (POLY)DRUMONLY ............................................ 1 ................. INCLS w/# AND MTG. & HDWR
EM203029 HARDWAREKIT, (RUBBER/POLYBLADES)........................... 1................. INCLUDED IN BLADE KITS
Go to Discount-Equipment.com to order your parts

PAGE 16 —WHITEMANWM-700S,700P —PARTS & OPERATION MANUAL —REV.#7 (06/21/01)
WM-700S —STEEL DRUM
STEEL DRUM
110 111
108
109
Go to Discount-Equipment.com to order your parts

WHITEMANWM-700S,700P—PARTS&OPERATIONMANUAL—REV. #7 (06/26/01) —PAGE 17
WM-700S —STEEL DRUM
WM-700S - STEEL DRUM
NO. PART NO. PART NAME QTY.REMARKS
100*EM201537 DUMP HANDLE 1
101 ELC1 TOWING TONGUE (P.EYE) .................................... 1 .............. NOLONGERAVAILABLE
101 EPC1
TOWING TONGUE (PIN HOLE) .. ............................ 1 .............. CONTACT DISCOUNT-EQUIPMENT/ACCESSORY ITEM
101 EBC1
TOWING TONGUE (BALL HITCH) .......................... 1 .............. CONTACT DISCOUNT-EQUIPMENT/ACCESSORY ITEM
102 EM963580 CAP SCREW ........................................................... 1 .............. REPLACES 505067
103 EM969038 LOCK NUT............................................................... 1 .............. REPLACES 505069
104*EM203333 DRUM GRILL 1
105*EM507271 GRILL OPEN BAR 1
106+508097 DRUM ASSY (STEEL) ............................................. 1 .............. INCLS. ITEMS w/*
508098 DRUM & SHAFT ASSY.(COMPLETE)(STEEL) ...... 1 .............. INCLS. ITEMS w/+AND DRUM HEAD &
PADDLE SHAFT ASSY
108 EM506309 MAIN FRAME 1
109 507264 CLUTCH LEVER 1
110 EM507421 DUMP LATCH 1
111 EM507835 CLEVIS PIN 1
❑ 13363 SAFETY CHAIN 1
❑ 01004 5/16" CONNECTOR LINK 2
❑ ILLUSTRATED ON PAGE 9
Go to Discount-Equipment.com to order your parts

PAGE 18 —WHITEMANWM-700S,700P —PARTS & OPERATION MANUAL —REV.#7 (06/21/01)
WM-700P —POLYETHYLENE DRUM
POLYETHYLENE
DRUM
116
121 122
123
124
125
126
123
124
Go to Discount-Equipment.com to order your parts

WHITEMANWM-700S,700P—PARTS&OPERATIONMANUAL—REV. #7 (06/26/01) —PAGE 19
WM-700P —POLYETHYLENE DRUM
POLYETHYLENEDRUM
MODEL WM-700P
NO. PART NO. PART NAME QTY.REMARKS
115*13000 PLASTIC DRUM (W/O GRATES)............................................. 1...................... REPLACES 504522
116 507495 SUPPORT DRUM 1
117*504534 STATIONARY GRATE 1
118*504535 MOVEABLE GRATE 1
119*507493 GRATE OPEN BAR 1
120*500083 DUMP HANDLE 1
508022 DRUM & SHAFT ASSY (COMPLETE) (POLY) ........................ 1 ...................... INCLS ITEMS w/* AND DRUM
HEAD & PADDLE SHAFT ASSY
121 EM963610 HHCS 3/8" NC X 1 1/4" G-5 .................................................... 7 ...................... REPLACES 492376
122 EM969013 LOCK NUT 3/8" NC ................................................................. 7 ...................... REPLACES492583
123 504987 FHCS 1/4" NC X 1" G-5 8
124 EM969079 LOCK NUT 1/4" NC ................................................................. 8 ...................... REPLACES 492581
125 504943 FHCS 3/8" NC X 2" G-5 12
126 EM969013 LOCK NUT 3/8" NC ................................................................. 12 .................... REPLACES 492583
Go to Discount-Equipment.com to order your parts

PAGE 20 —WHITEMANWM-700S,700P —PARTS & OPERATION MANUAL —REV.#7 (06/21/01)
WM-700S, 700P —GAS ENGINES, PULLEYS & CAB ASSEMBLY
CAB ASSEMBLY
Go to Discount-Equipment.com to order your parts

WHITEMANWM-700S,700P—PARTS&OPERATIONMANUAL—REV. #7 (06/26/01) —PAGE 21
WM-700S, 700P —GAS ENGINES, PULLEYS & CAB ASSEMBLY
GASENGINES,PULLEYS &CAB ASSEMBLY
COMMON PARTS
NO. PART NO. PART NAME QTY.REMARKS
150 507158 CABASSEMBLY 1
151 491010 LATCH ASSEMBLY ..................................... 2......... REPLACES 504744
152 502228 DRIVE GEAR 16-1/2 DIA. 1
153 EM959080 ROD END 2
154 EM102014 SPRING 1
155 EM901515 IDLER PULLEY 1
156 EM905016 PILLOWBLOCKBEARING 2
157 EM203098 SPRING CLIP 1
158 3351 DRIVEN PINION GEAR .............................. 1......... REPLACES 500272
159 EM940734 SWITCH, ON/OFF 1
167 502226 COUNTER SHAFT 1
168 JISB2804C25 SNAP RINGS .............................................. 2......... REPLACES 490957
169 500214 KEY 1
170 EM963064 BOLT 3/8 X16 X 3-1/4 1
171 1141 KEY 1
MODEL WM 700 w/HONDA
NO. PART NO. PART NAME QTY.REMARKS
161 GX240K1HA2 HONDA ENGINE GX240 K1HA 8HP .......... 1......... REPLACES 493261
161 GX160K1HX2 HONDA ENGINE GX160 5.5HP ENG. 1
162 492057 DRIVENPULLEY-LARGE 1
162 492055 DRIVE PULLEY-5.5 HP 1
163 EM901074 DRIVE PULLEY-SMALL 1" BORE 8.0 HP 1
164 EM505834 V-BELT 2
165 EM507490 THREADED ROD 1
166 EM507491 IDLER ARM 1
MODEL WM 700 w/WISCONSIN
NO. PART NO. PART NAME QTY.REMARKS
161 EM937171 ENGINEWISCONSIN BKN2-408472 ......... 1......... REPLACES 505208
162 EM505204 DRIVEN PULLEY 1
163 505205 DRIVE PULLEY 1
164 507775 V-BELT 2
165 EM507771 THREADED ROD 1
166 EM203352 IDLER ARM 1
MODEL WM 700 w/ROBIN
NO. PART NO. PART NAME QTY.REMARKS
161 W1280800466 ROBIN ENGINE 8HP EY-28........................ 1......... UPTOOCTOBER,1999
161 EH252YR0000 ROBIN ENGINE 8HP EH25-2..................... 1......... STARTING OCTOBER, 1999, REPLACES 493260
162 492057 DRIVENPULLEY-LARGE 1
163 492054 DRIVEPULLEY-SMALL 1
164 EM505834 V-BELT 2
165 EM507490 THREADED ROD 1
166 EM203352 IDLER ARM 1
MODEL WM-700 w/B&S
NO. PART NO. PART NAME QTY.REMARKS
161 1964521049 B&S ENGINE 8HP ...................................... 1......... REPLACES 493181
161 1352321036E1 B&S ENGINE 5HP 1
162 492057 DRIVENPULLEY-LARGE 1
163 EM901074 DRIVE PULLEY-SMALL 1" BORE 1
164 EM505834 V-BELT 2
165 EM507490 THREADED ROD 1
166 EM507491 IDLER ARM 1
Go to Discount-Equipment.com to order your parts