Mr. Coffee BVMC-KG2 User manual

Quick Start
Guide
BVMC-KG2
www.mrcoffee.com
Place Brewer upright on
a flat surface and remove
protective sheet and
plug into outlet.
DO NOT remove or
puncture the foil lid of
the K-Cup® portion pack.
Lift front facing of the brewer
to insert a K-Cup.
Step
1
Step
3
Step
2
Step
4
1
7
2
3
4
5
6
1 Brew Now / Off
2 Heating Indicator (Red)
3 Brewing Indicator (Green)
4 Drip Tray Plate
5 Drip Tray
6 Lift Handle & Insert K-Cup®
portion pack
7 Hot Water Tank
Place chosen K-Cup into the K-Cup
Assembly Housing. CAUTION:
Avoid the sharp needles in the
K-Cup Assembly Housing.
Lower the front facing completely
and firmly to close the Lid and
puncture the K-Cup portion pack.

Enjoy!
Depress the water marking
button and the hot water tank
will open automatically.
Step
5
Step
8
Step
7
Step
10
Step
6
Step
9
© 2011 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. CSNH12032010 P.N. 144295
Fill the Hot Water tank with
filtered or bottled water up
to the FILL LEVEL indicator.
Close the Hot Water
Tank cover.
Place a coffee cup in
the dispense area on the drip
tray. Press the BREW NOW
button.
NOTE: Drip Tray can be
removed to accommodate
larger mugs.
When the water reaches
temperature, the HEATING
light will go off and the
BREWING light will turn on.
NOTE: Pump will remain on
for up to 90 seconds to dry
the K-Cup.