Mr. Coffee Latte User manual

USER MANUAL
NWL0001311939 www.mrcoffee.com
SINGLE SERVE ICED AND HOT COFFEEMAKER WITH MILK FROTHER

2
INTRODUCTION
Hey! Welcome to the Mr. Coffee Product Family and
congratulations on the purchase of your new Mr. Coffee Latte™
Coffeemaker. Your coffeemaker brings the coffeehouse home with
the ability to make iced and hot coffee and froth milk with one
machine. Easily create lattes and cappuccinos with the step-by-step
guide and integrated measuring system. To create refreshing iced
coffee, use the tumbler to measure water and ice, and the scoop
to measure coffee grounds. The perfect ratio of hot, concentrated
coffee is brewed over the ice, leaving you with avorful iced coffee
that’s never watered down. Your coffeemaker can also make
single servings of pod-free hot coffee, giving you better taste and
reducing waste. As always, Mr. Coffee creates the great tasting
coffee and you make it special – add in your favorite avorings and
mix-ins to customize exactly how you like it!
Our number one goal is to give you great-tasting coffee every
time. If you have any questions about your new Mr. Coffee Latte™
Coffeemaker, please contact us at 1-800-MRCOFFEE
(1-800-672-6333).

3
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of re, electric shock, and/or injury to persons including
the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electric shock, do not place or immerse cord, plugs, or
appliance in water or other liquid.
4. This appliance is not intended for use by children or by persons with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge.
Close supervision is necessary when any appliance is used near children.
Children should be supervised to ensure that they do not play with the
appliance. Keep the appliance and its cord out of reach of children.
5. Unplug from outlet when either the appliance or display clock (if provided) is
not in use, and before cleaning. Allow to cool before putting on or taking off
parts, and before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return appliance
to an Authorized Service Center for examination, repair or adjustment. Do not
attempt to replace or splice a damaged cord.
7. The use of an accessory not recommended by the appliance manufacturer for
use with this appliance may result in re, electric shock or injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Always attach plug to appliance rst, then plug cord into the wall outlet (for
appliances with detachable cords). To disconnect, turn any control to the off
position, then remove plug from wall outlet.
12. Do not use appliance for other than intended use.
13. All lids should be closed during use.
14. Scalding may occur if the lid is removed or brew basket door is opened during
or immediately after the brewing cycles. Contents may be hot. Allow to cool
before opening the lid.
For appliances with sealed capsules:
15. WARNING: To avoid the risk of injury, never open or disengage the brew
chamber during the brew cycle.
16. Only use capsules intended for this appliance. If the capsule does not t, do not
force the capsule into the appliance.

4
For appliances with glass containers:
17. The container is designed for use with this appliance. It must never be used on
a range top.
18. Do not set a hot container on a wet or cold surface.
19. Avoid sudden temperature changes, such as rinsing, washing, lling, or
immersing a hot container with cold liquids.
20. Do not use a cracked or chipped container or a container having a loose or
weakened handle.
21. Do not clean container with cleansers, steel wool pads, or other abrasive
material.
For appliances with service panels:
22. WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO
NOT REMOVE THIS COVER. NO USER-SERVICEABLE PARTS INSIDE. REPAIR
SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY.
IMPORTANT SAFEGUARDS CONT.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
Polarized plug
This appliance has a polarized plug, (one blade is wider than
the other). As a safety feature to reduce the risk of electrical
shock, this plug is intended to t in a polarized outlet only
one way. If the plug does not t fully in the outlet, reverse
the plug. If it still does not t, contact a qualied electrician. Do not attempt to defeat
this safety feature or modify the plug in any way. If the plug ts loosely into the AC
outlet or if the AC outlet feels warm do not use that outlet.

5
A short power-supply cord (or detachable power-supply cord) may be provided to
reduce risks resulting from becoming entangled in or tripping over a longer cord.
Longer detachable power-supply cords or extension cords are available and may
be used if care is exercised in their use. If a long detachable power-supply cord or
extension cord is used:
a. The marked electrical rating of the detachable power-supply cord or extension
cord should be at least as great as the electrical rating of the appliance;
b. If the appliance is of the grounded type, the extension cord should be a
grounding type 3-wire cord; and
c. The longer cord should be arranged so that it will not drape over the
counter top or table where it can be pulled on by children or tripped over
unintentionally.
Do not pull, twist or otherwise abuse the power cord.
1. Place the appliance on a hard, at, level surface to avoid interruption of airow
underneath the coffeemaker.
2. Glass decanters only: Discard the decanter immediately if it is ever
boiled dry.
3. Glass decanters only: Protect the decanter from sharp blows, scratches or
rough handling.
4. Do not operate the appliance with an empty water tank.
5. Keep the area above the appliance clear during use, as hot steam will escape
the appliance.
POWER CORD INSTRUCTIONS
PRODUCT NOTICES

6
GET TO KNOW YOUR SINGLE SERVE
COFFEEMAKER & FROTHER
1. Scoop Storage
2. Drip tray – helps keep countertop
tidy and free from mess. Clean after
a few uses to prevent any overow
3. Drip tray cover – handwash only
4. Over ice button – press to brew
refreshing single servings of iced
coffee
5. Hot brew button – press to brew
avorful single servings of hot
coffee
6. Frother
7. Brew spout – place your cup or
tumbler underneath to catch your
delicious brew
8. Lid
9. Showerhead
10. Reusable coffee lter – is
dishwashable
11. Brew basket – is dishwashable,
insert lter lled with grounds here
12. Hot Froth – press to make hot froth
for lattes or cappuccinos
13. Cold Foam – press to make cold
foam for iced lattes
Lux Version:
14. Hot Capp button – press to make
hot cappuccino froth
15. Hot Latte button – press to make
hot latte froth
1
7
8
10
11
2
3
413
512
6
9

7
Frother
Frothing jar – is dishwasher safe
Frothing jar lid – is dishwasher safe
Frothing whisk – is dishwasher safe
Coffee ground scoop – dual sided for
measuring iced or hot coffee grounds
Mr. Coffee Iced Tumbler – is 22 oz. double-
wall insulated and BPA-free, handwash only
Lid – handwash only, BPA-free
Straw – handwash only, BPA-free

8
CLEAN COFFEEMAKER BEFORE FIRST USE
Just follow these simple steps:
1. Wash the frother jar, frothing whisk, frothing jar lid, tumbler, tumbler lid, tumbler
straw, reusable coffee lter, coffee ground scoop and brew basket in a mixture of
mild detergent and water. Rinse each thoroughly.
2. Fill tumbler with water to the water line and pour into reservoir. Replace brew
basket in position and nylon lter (or paper 5-cup basket style paper lter) into
brew basket.
3. Position tumbler under brew spout, plug in unit and press HOT BREW.
NOTE: the unit is on when the LED is lit.
4. When brewing is complete, discard water from tumbler and rinse tumbler
thoroughly with clean water.
5. Your Mr. Coffee Latte™ Coffeemaker is now ready for use!
NOTE: Wait a few minutes before brewing your next coffee to allow the heater to
cool. It is normal for steam to occur if brewing back to back.
DISHWASHER SAFE PARTS OF YOUR COFFEEMAKER
FROTHING MILK TYPES
To thoroughly clean your coffeemaker, you can put the following parts into the top-
rack of the dishwasher:
1. Reusable coffee lter
2. Brew basket
3. Milk frothing jar
4. Jar lid
5. Frothing whisk
CAUTION: The electrical base, power cord and plug are not dishwasher safe and
should never be immersed in water or other liquids.
Experiment and Find Your Favorite Type!
Not all alternative milk brands froth the same
Whole Milk Preferred milk type for creating a thick, creamy froth and the
best outcome for a latte or cappuccino.
Reduced Fat Milk Creates a lighter foam due to lower fat content. Skim milk will
create a more stable foam that is easier to shape.
Oat Milk Foam results vary based on different brands. Try using an oat
milk based creamer for better results!
Almond Milk Creates smaller foam bubbles which will dissipate quickly. Try
using an almond based creamer for better results!

9
CLEAN COFFEEMAKER BEFORE FIRST USE
1. Plug the coffeemaker in.
2. Fill your favorite mug with clean, ltered water to brew a concentrated coffee shot.
3. Lift the lid of the unit and pour the water in to the water reservoir to the 4-ounce
mark. Discard any excess water in your mug.
4. Place the reusable coffee lter (or standard 5-cup basket-style paper lter) into the
brew basket.
5. Using the HOT side of the coffee scoop, add 1½ scoops of coffee grounds to the
coffee lter. Move the shower head over the coffee lter and grinds. Close the lid.
NOTE: If you want a stronger coffee shot, add an additional ½ scoop of coffee
grounds.
6. Place the mug under the brew head. Press the Hot Brew button – ensure the LED
is illuminated.
7. While your coffee is brewing, prepare your frothed milk.
NOTE: Before adding milk, ensure that your whisk is properly placed at the bottom
of frother jar by clicking in-place and securely fastening it.
NOTE: Please ensure to handle frothing jar by the silicone sleeve as the bottom of the
frothing jar gets hot!
NOTE: Clean frothing jar after each use.
NOTE: Wait a minute or so before frothing again to allow the heater to cool.
NOTE: Do not touch frothing warming plate after use as it is hot.
For a Hot Latte:
8. Add 6.5 ounces of the milk of your
choice to the latte line indicator in
the frothing jar.
9. Place frothing jar on mount. Put lid
back on the frothing jar.
10. Press the Hot Froth or Hot Latte
button (depending on your model).
Ensure the LED is illuminated and
frothing will begin. Frothing jar will
stop automatically once the cycle
is complete.
NOTE: Do not ll frothing jar past
lines for best froth outcome. Do not
remove frothing jar from mount mid-
cycle. If removed, turn off frother
by pressing Hot Froth or Hot Latte
button again. Cycle will need to be
re-started if desired.
11. Add frothed milk into mug
and enjoy!
For a Hot Cappuccino:
8. Add 5 ounces of the milk of your
choice to the capp line indicator in
the frothing jar.
9. Place frothing jar on mount. Put lid
back on the frothing jar.
10. Press the Hot Froth or Hot Capp
button (depending on your model).
Ensure the LED is illuminated and
frothing will begin. Frothing jar will
stop automatically once the cycle
is complete.
NOTE: Do not ll frothing jar past
lines for best froth outcome. Do not
remove frothing jar from mount mid-
cycle. If removed, turn off frother
by pressing Hot Froth or Hot Capp
button again. Cycle will need to be
re-started if desired.
11. Add frothed milk into mug
and enjoy!
LET’S MAKE A HOT LATTE OR CAPPUCCINO!

10
1. Plug the coffeemaker in. Add clean ltered water to your Mr. Coffee Iced
tumbler to brew a concentrated coffee shot. Lift the lid of the unit and pour the
water in to the water reservoir to the 4-ounce mark. Discard any excess water in
your tumbler.
2. Place the reusable coffee lter (or standard 5-cup basket-style paper lter) into
the brew basket.
3. Using the HOT side of the coffee scoop, add 1 ½ scoops of coffee grounds to the
coffee lter. Move the shower head over the coffee lter and grinds. Close the lid.
NOTE: If you want a stronger coffee shot, add an additional ½ scoop of coffee
grounds.
4. Fill your Mr. Coffee Iced Tumbler with ice to the Ice line indicator.
5. Place the tumbler under the brew head. Press the Hot Brew button – ensure the
LED is illuminated.
6. While your coffee is brewing, prepare your frothed milk.
NOTE: Before adding milk, ensure that your whisk is properly placed at the
bottom of frother jar by clicking in-place and securely fastening it.
For an Iced Latte:
7. Add 6.5 ounces of the milk of your
choice to the latte line indicator in
the frothing jar.
8. Place frothing jar on mount. Put lid
back on the frothing jar.
9. Press the Cold Froth button to
create a creamy cold foam. Ensure
the LED is illuminated and frothing
will begin. Frothing jar will stop
automatically once the cycle
is complete.
NOTE: Do not ll frothing jar past
lines for best froth outcome. Do not
remove frothing jar from mount mid-
cycle. If removed, turn off frother by
pressing Cold Foam button again.
10. Pour frothed milk into tumbler, add
straw and lid then enjoy!
For an Iced Cappuccino:
7. Add 5 ounces of the milk of your
choice to the latte line indicator in
the frothing jar.
8. Place frothing jar on mount. Put lid
back on the frothing jar.
9. Press the Cold Froth button to
create a creamy cold foam. Ensure
the LED is illuminated and frothing
will begin. Frothing jar will stop
automatically once the cycle
is complete.
NOTE: Do not ll frothing jar past
lines for best froth outcome. Do not
remove frothing jar from mount mid-
cycle. If removed, turn off frother by
pressing Cold Foam button again.
10. Pour frothed milk into tumbler, add
straw and lid then enjoy!
LET’S MAKE AN ICED LATTE OR CAPPUCCINO!
NOTE: Clean frothing jar after each use.