MTD 500 Series User manual

MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
Op e r a t O r ’sMa n u a l
Form No. 769-04394
(November 19, 2008)
Push Mower — Model Series 500

18
Model Series 500
5
4
1
30
6
29
31
25
14
15
14
28 27
9
22
21
27
19
20
14
18
31
17
39
26
23
16
32
24
14
14
38
10
8
7
34
33
35
37
36
2
3
11
12
13

19
Ref. Part Number Description
1. 710 -1205 Eye Bolt
2. 720-0279 Wing Nut
3. 747-1161A-0637 Blade Control Handle
4. 749-1092A-0637 Upper Handle
5. 746-0957 Control Cable
6. 749-04037 Lower Handle
7. 725-0157 Cable Tie
8. 687-02048A-0638 Deck Assembly, 22”
9. 710-0654A TT Screw, 3/8-16 x 1.0
10. 748- 0376C Blade Adapter
11. 942-0742A Mulching Blade, 22”
12. 736-0524B Blade Bell Support
13. 710-1044 Screw, 3/8-24 x 1.5
14. 712- 04065 Lock Nut, 3/8-16
15. 741-0717 Thrust Bearing
16. 687-02343 Rear Pivot Arm - LH
687-02344 Rear Pivot Arm - RH
17. 732-1026 Front Lever
18. 736-0741 Bell Washer, .760 OD x 1.25 OD
19. 73 8 -117 2 Shoulder Screw
20. 734-1988 Front Wheel
Ref. Part Number Description
21. 710-0599 TT Screw, 1/4-20 x .5
22. 736-0270 Bell Washer, .265 ID x .75 OD
23. 710-0216 Screw, 3/8-16 x .75
24. 738-04267 Shoulder Screw
25. 734-04082 Rear Wheel
26. 982-3062A Handle Bracket Assembly, RH
—982-3063A Handle Bracket Assembly, LH
27. 720-04072 Star Knob
28. 731-2537 Trailshield
29. 17098P Hinge Clip
30. 710 -1174 Carriage Bolt, 5/16-18 x 2
31. 720-0426 Knob
32. 732-0984B Rear Lever
33. 732-1014 Torsion Spring
34. 17032A Chute Hinge
35. 747-0710 Hinge Pin
36. 931-1034B Hinged Chute Deector Ass’y
37. 631-04045 Mulching Bae
38. 687-02342 Front Pivot Arm
39. 741-04242 Height Adjuster Bearing
Model Series 500