4.1 Guidelines for replacing blades
The MÜHLE ENTHUSIAST PRO Straight Razor (hereinafter
referred to as “Straight Razor”) is only compatible with
half, traditional razor blades. For a close shave, use a blade
only for a maximum of ve (5) shaves. If the Straight Razor
is used by or on dierent people, a new blade should be
inserted before each use for reasons of hygiene. Insert the
blade only with clean, dry hands. Follow the safety instruc-
tions for changing the blade:
1.Unfold the Straight Razor out of the handle so that
the ap of the blade holder can be opened. Now lay the
Straight Razor at on a level surface so that the blade
holder is horizontal. The hinge should point to the left and
the tang to the right. The closed lock and open lock
symbols should be visible.
2.With one hand, slide the grooved lock to the right
towards the open lock symbol in order to open the
locking ap with the other hand. Open it by 180degrees so
that it lies at.
3.Now insert the blade. Only touch the unsharpened ends
of the blade on the sides. Insert the blade exactly with the
help of the adjustment aids. Check again that the blade is
xed correctly.
4.Close the locking ap of the blade holder. Pull the lock
slightly in the direction of the open lock symbol and
allow the lock to slide back into place after closing the ap.
Check that the ap is closed correctly.
5.Check that the cutting edge of the blade runs parallel to
the blade holder and that the blade is xed correctly.
