Muji CPD-4 User manual

Wall-mounted CD Player
Model CPD-4
USER MANUAL
壁掛式CD音響
型號 CPD-4
操作說明書
pThank you for purchasing this product.
pBe sure to read this user manual before operating the product and use it correctly.
pStore this manual in a safe place for future reference.
p多 謝 惠 顧 本 公司 產 品。
p為了正確及安全地使用本產品,使用前請詳細參閱此說明書。
p請務必妥善保管本操作說明書。
D01204752A
ENGLISH 繁體中文

2
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10) Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified
by the manufacturer.
12) Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer, or
sold with the apparatus.
When a cart is used, use
caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14) Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.

3
< Do not expose this apparatus to drips or
splashes.
< Do not place any objects filled with liquids,
such as vases, on the apparatus.
< Do not install this apparatus in a confined
space such as a book case or similar unit.
< The apparatus draws nominal non-operating
power from the AC outlet.
< The apparatus should be located close
enough to the AC outlet so that you can
easily grasp the power cord plug at any time.
< The appliance coupler is used as the
disconnect device, the disconnect device
shall remain readily operable.
< If the product uses batteries (including a
battery pack or installed batteries), they
should not be exposed to sunshine, fire or
excessive heat.
< CAUTION for products that use replaceable
lithium batteries: there is danger of explosion
if a battery is replaced with an incorrect type
of battery. Replace only with the same or
equivalent type.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION
< DO NOT REMOVE THE EXTERNAL CASES OR
CABINETS TO EXPOSE THE ELECTRONICS. NO
USER SERVICEABLE PARTS ARE WITHIN.
< IF YOU ARE EXPERIENCING PROBLEMS WITH
THIS PRODUCT, CONTACT MUJI LIMITED
FOR A SERVICE REFERRAL. DO NOT USE THE
PRODUCT UNTIL IT HAS BEEN REPAIRED.
< USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
MPEG Layer-3 audio coding technology licensed
from Fraunhofer IIS and Thomson.
This product is protected by certain intellectual
property rights of Microsoft. Use or distribution
of such technology outside of this product is
prohibited without a license from Microsoft.
Other company names, product names and
logos in this document are the trademarks or
registered trademarks of their respective
owners.

4
What’s in the box
Confirm the supplied standard accessories.
Remote control unit x 1
Battery (CR2025) for remote control
unit x 1
(The battery has been installed in the
remote control unit when shipped
from the factory.)
Wall-fixing plate x 1
Fixing screws x 4
Dedicated AC adaptor x 1
Owner’s manual (this document) x 1
Before Using the UnitContents
Before Using the Unit . . . . . . . . . . . . . . . . . . . 4
Safety Precautions . . . . . . . . . . . . . . . . . . . . . 6
Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MP3/WMA Compatibility. . . . . . . . . . . . . . . . . 12
Identifying the Parts. . . . . . . . . . . . . . . . . . . . 13
Remote Control Unit . . . . . . . . . . . . . . . . . . . 14
Installation Method . . . . . . . . . . . . . . . . . . . . 14
Connecting the AC adaptor . . . . . . . . . . . . . . . 15
Listening to a Disc . . . . . . . . . . . . . . . . . . . . . 16
Listening to the Radio. . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 19
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 21

5
ENGLISH
Read this before operation
<When a disc is inserted into the unit, do not tilt the
unit. Doing so might cause a malfunction.
<Before the unit is moved, or covered with a paper
or cloth for a moving, be sure to remove the disc
from the unit. If the unit is moved with a disc
inside, it might cause a malfunction.
<Choose the installation location of your unit
carefully. Avoid placing it in direct sunlight or
close to a source of heat. You should also avoid
locations that are subject to vibration, excessive
dust, heat, cold, or moisture. Doing so might
result in discoloration or deformation, or cause a
malfunction.
<When the unit is turned on, if a TV is turned on
nearby lines might appear on the TV screen
depending on the frequency of the TV broadcast.
This is not a malfunction of the unit or the TV.
If you see such lines, turn off the unit (standby),
or remove the plug of the AC adaptor from the
socket.
<While the plug of the AC adaptor is inserted into
the socket, power is consumed even in stand-by
mode.
AC adaptor’s plug
Please change the AC adaptor plug to suit the mains
socket where you will use the unit.
1. While pulling the tab at the side of the AC adaptor
plug, pull the plug out at an angle to remove it.
2. Attach the concave part of the plug (A) to the
convex part (B) on the inside opposite the tab.
(A)
(A) (B)
3. Insert the plug until you hear a click.

6
Safety Precautions
In order to use the product safely and correctly, and to prevent both injury to yourself and others
around you and damage to property, please read the following safety precautions carefully before use.
F
If anything unusual occurs
If smoke, a strange smell, or a strange noise is emitted from the
product
If water or foreign bodies get into the product
If the product falls and becomes damaged
You must remove the plug of the AC adaptor from the power socket
immediately.
Do not continue to use the product as this may cause a fire or electric
shock. Contact your retailer.
Before installing and removing this product, always ensure you
remove the plug of the AC adaptor from the power socket.
If the plug of the AC adaptor is still inserted into the power socket, there is a
risk of accident or electrocution.
Before moving this product, always remove the plug of the AC
adaptor from the power socket.
The cable of the AC adaptor may be damaged, and it may cause a fire or
electric shock.
If you do not use the product for an extended period of time, for
example, if you are going away on vacation, the plug of the AC
adaptor must be removed from the power socket for safety reasons.
Remove the plug of the AC adaptor from the power socket for safety
reasons before maintenance.
Otherwise, it may cause electrocution.
A
Do not damage the DC power cable and AC adaptor cable.
Do not place anything heavy on the DC power cable and AC adaptor
cable, or place the DC power cable and AC adaptor cable under the
product.
Do not alter, bend excessively, twist, pull, or heat the DC power cable
and AC adaptor cable and AC adaptor cable.
If the DC power cable or AC adaptor cable is damaged (the core is exposed
or broken), it may cause a fire or electric shock. In such a case, ask your
retailer to exchange it.
QWarning
If you ignore the following warnings and use the product
incorrectly, it may cause death or serious injury due to
fire or electrocution.
Disconnect at
plug
Prohibited

7
ENGLISH
A
Keep the plug of the AC adaptor free from dust.
If there is dirt or dust between the plug of the AC adaptor and the power
socket, it may cause a fire or electric shock. Remove dirt or dust after
removing the plug of the AC adaptor from the power socket.
Do not use the product with any voltage other than that indicated on
the AC adaptor.
This product is for use within the country of purchase only. It cannot be
used in other countries. Do not use the product with any power supply or
voltage other than that indicated on the AC adaptor. Do not connect the
AC adaptor to DC power supplies of on ships, etc. Doing so may cause a fire
or electric shock.
Do not use any AC adaptor other than that supplied with this
product.
Do not use the AC adaptor supplied with this product for another
equipment.
Doing so may cause a malfunction, fire, or electric shock.
Do not leave the DC power cable near any heat sources such as stoves
or other objects that produce heat.
The cover of the DC power cable may be melted and it may cause a fire or
electric shock.
Do not touch the plug of the AC adaptor with wet hands.
Doing so may result in electrocution.
Do not pull on the AC adaptor cable when you remove the plug of the
AC adaptor from the power socket.
The AC adaptor cable may be damaged, and it may cause a fire or electric
shock. Be sure to grasp the plug of the AC adaptor when removing it from
the power socket.
Do not place vases or anything containing water or other liquids on
the product.
If water gets into the product, it may cause a fire or electric shock.
QWarning
If you ignore the following warnings and use the product
incorrectly, it may cause death or serious injury due to
fire or electrocution.
Prohibited

8
Safety Precautions (Continued)
ADo not locate the product in a place that is either damp or dusty. Do
not use the product in a bathroom.
Do not locate the product in a place where it may be exposed to
smoke or steam, such as near a kitchen table or humidifier.
Doing so may result in a fire, electric shock, or injury.
DDo not take this product apart.
Doing so may cause a fire or electric shock. Ask the retailer for servicing/
repairs of the inside.
Do not alter this product.
Doing so may cause a fire or electric shock.
S
The product should be located close to the power socket so that you
can easily grasp the plug of the AC adaptor at any time.
If anything unusual occurs, you must remove the plug of the AC adaptor
from the power socket immediately.
The product should be located away from another equipment in
order to be able to expel heat.
When the product is installed in a rack or similar unit, leave a space of
at least 5 cm (2 inches) above the product.
Heat is generated inside the product, and may cause a fire if not expelled
properly.
QWarning If you ignore the following warnings and use the product
incorrectly, it may cause death or serious injury due to
fire or electrocution.
Prohibited
No
disassembly
Mandatory
Action

9
ENGLISH
QWhen installing this product, refer to the installation method in this
manual at all times, taking care to observe the following.
When attaching the wall-fixing plate, make sure that you use screw fixings
that are appropriate for the structure and material of the wall. The product
may cause injury in the event that it falls from the wall.
A
Do not place the product on an unstable or uneven place.
The product may cause injury in the event that it falls from the wall.
Do not move the product during playback.
Do not pick up or move the product since the disc spins very quickly during
playback. Doing so may cause scratches on the disc.
QCaution
If you ignore the following cautions and use the product
incorrectly, it may cause injury to yourself and others
around you and damage to property due to electrocution
or other accidents.
Precaution
Against fall
Prohibited

10
Safety Precautions (Continued)
Battery Precautions
This product uses a battery. If you handle the battery incorrectly, it may result in the battery
heating up, catching fire, or leaking. Be sure to observe the following precautions.
S
When inserting the battery into the remote control unit, check that
the polarities (positive “+” and negative “-”) are correctly positioned,
and insert it according to the indication on the battery case.
If you insert the battery incorrectly, it may cause a fire or injury, or staining
of surrounding objects due to explosion or leaking.
If the remote control unit is not used for a long time, remove the
battery.
Battery leakage may cause a fire or injury, or staining of surrounding
objects. If the battery leaks, wipe away the leakage inside the battery
compartment and replace the battery with a new one. If the leakage
adheres to your skin, wash it with water.
A
Do not use any batteries other than those specified for the remote
control unit.
Otherwise, it may cause a fire or injury, or staining of surrounding objects
due to explosion or leaking.
Do not carry or store the battery with other metallic objects.
The battery may short circuit, which may cause it to explode or leak, etc.
DDo not take the battery apart.
Acidic matter inside the battery may cause damage to your skin or clothes.
QWarning Warnings for battery usage
Mandatory
Action
Prohibited
No
disassembly

11
ENGLISH
Continued on the next page
Discs
Discs that can be played on this
unit
This unit can play back the above-mentioned disc
types. It cannot play back the discs of the other types.
Caution:
Playback of any other type of disc could cause
loud noise and damage to speakers as well as
harm hearing. Never play back any other type of
disc.
<Copy-protected discs and other discs that do
not conform to the CD standard might not play
correctly in this unit. If you use such discs in this
unit, MUJI LIMITED and its subsidiaries will not be
responsible for any consequences or guarantee
the quality of reproduction. If you experience
problems with such non-standard discs, you
should contact their issuers.
About CD-R/CD-RW discs
This unit can play back CD-R and CD-RW discs that
have been recorded in the audio CD format (CD-DA).
Also can playback MP3 and WMA files recorded into
the CD-R/CD-RW discs.
<Discs created by a CD recorder must be finalized
before use with this unit.
<Depending on disc quality and recording
conditions, playback of some discs might not be
possible. Please see the manual for the device that
you used to create the disc.
<If you are uncertain about the handling of a CD-R
or CD-RW disc, please contact the seller of the disc
directly.
Caution
<Do not play any disc that is warped, deformed
or damaged. Playing such discs could cause
irreparable harm to the playing mechanisms.
<Use a soft oil-based felt-tipped pen to write
information on the label side. Never use a ball-
point or hard-tipped pen, as this could cause
damage to the recorded side.
<Never use a stabilizer. Using commercially available
CD stabilizers with this unit will damage the
mechanisms and cause them to malfunction.
<Do not use irregularly-shaped discs (octagonal,
heart-shaped, business card size, etc.). CDs with
these shapes could damage the unit.
Handling precautions
<Always insert a disc with the label side up. Only
one side of a Compact Disc can be played.
<If there are scratches, fingerprints, or stains on the
recorded side (non-label side), an error may occur
when attempting to play back a disc. Handle the
disc carefully.
<To remove a disc from its storage case, press down
on the center of the case and lift the disc out,
holding it carefully by the edges.
CDs that bear the “COMPACT disc DIGITAL AUDIO”
logo.
CD-R and CD-RW discs that have been correctly
recorded in the audio CD format and finalized.
Finalized CD-R and CD-RW discs that contain MP3/
WMA files.
How to remove
the disc
How to hold the disc

12
This unit can play MP3/WMA files recorded on a CD-R,
CD-RW discs.
<This unit can play back monaural and stereo MP3
files that are in the MPEG-1 Audio Layer 3 format
with a sampling rate of 16 kHz or 48 kHz and a bit
rate of 32 to 320 kbps.
<WMA file must have a sampling rate of 32 kHz, 44.1
kHz or 48 kHz, and a bit-rate of 48 to 192 kbps.
<This unit cannot play copyright protected files.
Cautions when preparing MP3/
WMA files using a computer or
other device
<Always include the extension in the file name. This
unit recognizes MP3 files by their “.mp3”, and WMA
files by their “.wma” file extensions.
<Always close the session (complete disc creation).
This unit cannot play discs if the session has not
been closed.
<If the disc contains more than 999 files or 99
folders, this unit cannot play it back correctly.
Discs (Continued)
MP3/WMA Compatibility
Storage precautions
<Discs should be returned to their cases after use to
avoid dust and scratches that could cause the laser
pickup to “skip.”
<Do not expose discs to direct sunlight or high-
temperature and humidity for extended periods.
Long exposure to high temperatures will warp
discs.
<CD-R and CD-RW discs are more sensitive to the
effects of heat and ultraviolet rays than ordinary
CDs. It is important that they are not stored in
locations where they will be exposed to direct
sunlight. They should also be kept away from
sources of heat, such as radiators and heat-
generating electrical devices.
<Dirt on the disc may cause the sound to skip or
reduce the sound quality. Be sure to keep the discs
clean.
Maintenance
<If a disc becomes dirty, wipe its surface radially
from the center hole outward towards the outer
edge with a soft, dry cloth.
<Never clean discs using chemicals such as record
sprays, antistatic sprays and fluids, and thinner.
Such chemicals will do irreparable damage to the
disc’s plastic surface.

13
ENGLISH
Identifying the Parts
Main unit
Remote control unit
Connection to the AC
adaptor
FM antenna
Skip button (forward) (/)
Forward button (,)
Skip button (back) (.)
Back button (m)
Stop button (H)
Repeat button (REPEAT)
Play/Pause button (y/J)
FM button (FM)
Volume button (VOLUME+/−)
Lens
Protective sheet (card)
DC Power cable
(play/stop)
Display*
Mode button (MODE)
Volume button (−,+)
Skip button
Back/forward button
(.,/)
Remote sensor
Central hub
Speakers
To simplify explanations, instructions
in this manual might refer to the
main unit or remote control unit only.
In such cases, the same controls on
the remote control and main unit will
operate similarly.

14
Remote Control Unit
Notes on using the remote
control unit
<Even if the remote control is used within its
effective operation range (5 m/16 feet), the unit
might not respond to the remote if there are any
obstacles between them.
<The remote control might not function if sunlight
or other bright light shines directly on the remote
sensor of the unit.
<The remote control might function incorrectly if
it is operated near other products that generate
infrared rays or if other remote control devices
that use infrared rays are operated near the unit.
Likewise, the other products might also function
incorrectly.
Before using the remote control
When you use the remote control for the first time,
pull out the insulation sheet from the rear.
Battery replacement
The battery has been installed in the remote control
unit when shipped from the factory.
To replace the battery, pull out the battery tray from
the rear, put the lithium-ion battery (CR2025) in with
the "+" side facing up, and insert the tray again.
Battery replacement time
If the distance required between the remote control
unit and main unit decreases, or the remote control
unit's buttons don't work, the battery is exhausted. In
this case, replace the battery with a new one.
For information about the collection of batteries,
please contact your local municipality, your waste
disposal service or the place where you purchased
them.
1Attach the wall-fixing plate to the
wall.
Choose a sturdy wall, and install the wall-fixing plate
using the supplied screws or other fixings.
<Make sure that the wall-fixing plate does not feel
shaky or loose.
QCaution
Be very careful when attaching the wall-fixing
plate to the wall.
<When attaching to walls made of plasterboard or
concrete construction etc. please make sure that
you use proprietary fixings that are appropriate for
the wall. In particular, it is very hazardous to use
regular wood screws on walls that are made of
plasterboard or a similar type of material.
2Extend the FM antenna.
Unwind the FM antenna on the rear, and extend it.
Installation Method

15
ENGLISH
Connecting the AC adaptor
After connecting the power cord to the dedicated
AC adaptor cord, plug the adaptor into an outlet.
Into a power socket
Dedicated
AC adaptor
The DC power cable of
the unit
The plug of the
AC adaptor
3Attach the unit to the wall-fixing
plate.
Line the unit up with the wall-fixing plate and clip the
back of the unit on at the slots.
<Make sure that the unit is firmly attached.
<Extend the FM antenna fully and position for the
best reception.

16
1Insert the CD into the unit.
Fix the CD onto the central hub of the unit.
QCaution
Fix the CD firmly into the unit until you hear
a click. The CD will spin very fast, so it is
extremely hazardous if the CD is not inserted
correctly into the unit.
<Be careful not to press the CD too hard when you
fix it. Doing so may cause scratches on the CD.
2Gently pull the DC power cable to
play back the CD.
CD playback will start automatically.
<The play/pause button (y/J) on the remote
control unit can also be used.
<Please do not touch the CD whilst it is spinning/
playing.
3Press the volume buttons (−,+) to
adjust the volume.
VOL 05
<The volume can be adjusted in a range between
00 and 32. (“MAX” is shown on the display at 32.)
To stop the playback, gently pull the
DC power cable again.
<The stop button (H) on the remote control unit
can also be used.
<30 minutes after playback finishes, the machine
will automatically enter stand-by mode. To
re-activate from stand-by mode, pull on the
power cable lightly.
Removing the CD
Pull the CD straight outwards to remove it.
<Be careful not to press the CD too hard when you
remove it. Doing so may cause scratches on the
CD.
Caution
Never touch the lens.
Please take care, as any damage or dirt can cause
the CD player to malfunction.
The volume level
is shown.
Listening to a Disc

17
ENGLISH
<During playback, press the repeat button (REPEAT)
once to play back all tracks on the disc repeatedly
from the first track ("REPEAT" is shown on the
display).
<To stop the repeat playback, press the repeat
button (REPEAT) again ("NORMAL" is shown on the
display).
MP3/WMA Playback Order
MP3/WMA files on a CD can be stored in folders in
the same way that files are managed on a computer.
Moreover, multiple folders can be contained inside
another folder.
Here is an example of the file and folder structure
of an MP3/WMA disc, showing the order of the
folders and the playback order of the files (
1
to
7
).
01root
02 folder
04 folder
05 folder
03 folder
folder
MP3 file
1
2
3
7
MP3 file
MP3 file
MP3 file
MP3 file
MP3 file
MP3 file
4
5
6
<The playback order shown in the diagram above
may change depending on how you add, delete,
or move files or folders.
Selecting tracks
To previous track
02 00:05
<During playback, press the skip button (.)
repeatedly to return to the previous tracks.
<During playback, press the skip button (.)
once to return to the start of the current track.
<During playback, keeping the skip button (.)
held down will take you back more quickly.
To next track
04 00:05
<During playback, press the skip button (/)
repeatedly to go to the next tracks.
<During playback, press the skip button (/)
once to go to the start of the next track.
<During playback, keeping the skip button (/)
held down will take you ahead more quickly.
Playing back all tracks repeatedly
The track number and the
elapsed time are shown.
The track number and the
elapsed time are shown.

18
Listening to the Radio
1Press the Mode button (MODE).
The source changes to FM.
FM 87.5
<The FM button (FM) on the remote control unit
can also be used.
<When a CD is not inserted into the unit, pulling
the DC power cable will also perform the same
operation.
2Select the station you want to
listen to.
Automatic selection
FM 87.5
Hold the skip button (.//) for more than
2 seconds and release it when the frequency
display starts changing continuously.
A station is tuned in automatically, and the
frequency display will stop. Repeat this step until
the station you want to listen to is found.
<To stop the automatic tuning process, press the
skip button (.//) briefly.
Manual selection
To tune in to a station the unit cannot tune in to
automatically, press the skip button (.//)
repeatedly to select the station you want to
listen to.
FM 87.5
<Press the skip button (.//) briefly. The
frequency changes by a fixed step (0.1MHz). Press
repeatedly until the station you want to listen to
is tuned in.
<You can also use the skip buttons (.//) on
the remote control.
3Press the volume buttons (−,+) to
adjust the volume.
VOL 05
<The volume can be adjusted in a range between
00 and 32. (“MAX” is shown on the display at 32.)
The frequency
is shown after
"FM" is shown.
The volume level
is shown.
Hold down

19
ENGLISH
Troubleshooting
If you a have problem with your system, read this page
and try to solve the problem yourself before calling
your dealer.
General
No power.
eInsert the plug of the AC adaptor into a power
socket.
eCheck the connection of the DC power cable
and the AC adaptor cable.
eIf the battery of the remote control unit is
exhausted, replace it with a new one.
I’m pressing the buttons but nothing is working.
eCondensation. Wait one hour before using.
No sound is coming from the speakers.
eThe volume is turned down. Adjust the volume.
The remote control does not work.
eThe insulation sheet has been inserted in the
battery compartment when shipped from the
factory. Pull it out before use. For details, see
page 14.
eIf the battery is exhausted, replace it with a new
one.
eUse the remote control unit within the operation
range (5 m/16 feet) and point it at the remote
sensor on the main unit.
eRemove obstacles between the remote control
unit and the main unit.
eIf a bright light is near the unit, turn it off.
The sound is noisy.
eThe unit is too close to a TV or similar device.
Relocate it away from the interfering device or
turn it off.
If the reception is poor
Extend the FM antenna or change its position to
improve the reception of a station.
To turn off the unit (standby),
press the Mode button (MODE)
again.
<The FM button (FM) on the remote control unit
can also be used.
<When a CD is not inserted into the unit, pulling
the DC power cable will also turn off the unit
(standby).

20
CD player
Cannot insert the CD into the unit.
eRemove dust or obstacles from the central hub
of the unit.
Cannot play.
eInsert a disc with the label side facing you.
eYou cannot play back unfinalized CD-R/RW discs.
Finalize such a disc using a CD recorder and try
again.
eDepending on the disc type, it may not be
possible to play back. For details, see pages 11
and 12.
The sound stutters or breaks up.
eThe unit is placed somewhere where there is
a lot of vibration. Put it somewhere with less
vibration.
eThe disc is dirty. Clean the disc.
MP3/WMA
Cannot play.
eCheck the MP3/WMA file extension. For details
about the extension, see page 12.
FM Tuner
Cannot listen to any station, or the signal is too
weak.
eTune in to a station properly.
eChange the position or orientation of the main
unit until you receive the station clearly.
eRotate the FM antenna until you receive the
station clearly.
Troubleshooting (Continued)
A microcomputer is used in this unit, it may
sometimes not operate correctly due to noise,
etc. from around the unit. In this case, remove the
plug of the AC adaptor from the power socket,
wait for a while before inserting the plug back
into the power socket, then operate the unit
again.
Maintenance
If the main unit or remote control unit gets dirty, wipe
with a soft cloth or use a diluted, mild, liquid soap.
Do not use benzine or thinner as they could damage
the surface of the unit.
QCaution
Remove the plug of the AC adaptor from the
power socket before maintenance.
Table of contents
Other Muji CD Player manuals