TROUBLE SHOOTING
The appliance does not switch on.
- Make sure it is plugged into a mains socket.
- Set ON/OFF switch to ON position. If unit is in standby mode, press STANDBY/MODE but-
ton to turn on the unit.
The remote control does not work or works only intermittently.
- Check that batteries are inserted or change them.
- Aim the remote control at the appliance. The infrared beam must not be blocked or
interrupted.
- Operate the remote control within about 23ft (7m).
There is no sound or the sound is of poor quality.
- Check the connections.
- Make sure the MUTE function is not on.
The picture is poor quality.
- Check the connections.
- Adjust the brightness or contrast of your display.
- Adjust the length, angle and direction of antenna.
No signal
- Check if the channel is right or not.
- Auto reset the receiving channel.
- Move the unit to another place.
- Try to replace telescopic antenna with external antenna.
SAFETY PRECAUTION
- The set does not work in extremely high or low temperature.
- Do not attempt to modify the unit, modifying the unit may cause an accident.
- Do not put the remote control under high temperature or under the sunshine.
- Do not use your set immediately after transportation from a cold place to a warm place,
there may be condensation problems.
- Make sure that you keep your set away from water and high temperatures.
- The ventilation should not be impeded by covering the ventilation openings with
items such as newspapers, table-cloths, curtains, etc.
- No naked ame sources, such as lighted candles, should be placed on the apparatus.
- To use the apparatus in moderate climates.
- The apparatus should not be exposed to dripping or splashing.
- Ensure a minimum distance of 5cm around the apparatus for sufcient ventilation.
- Do not place objects lled with liquids, such as vases, on the apparatus.
- The marking plate is located on the back of unit.
- Attention should be drawn to the environmental aspects of battery disposal.
- Do not throw batteries in re!
- Battery shall not be exposed to excessive heat such as sunshine, re or the like.
- Excessive sound pressure from earphones and headphones can cause hearing loss.
- Under the inuence of electrical fast transient or/and electrostatic phenomenon, the
product may malfunction and require user to power reset.
GB - 15
GB - 12
Yellow button: to make the picture leftward or rightward.
Blue button: to make the picture upward or downward.
OK: To enter Picture playing mode and auto-slide to see the pictures with different view effect.
EXIT: to enter 12pcs picture preview mode.
Pictures preview mode(12pcs small preview pictures on the display) :
Press▲,▼, ◄ , ► to select a desired picture and press OK to view the picture.
Press blue button on remote control to return to the picture le list.
Press Exit to exit “My Album”.
2. My Music
Press INFO button on the remote control to select the drivers.
Press ▲ / ▼ to select the music, press OK button to start playing music.
Press ▲ / ▼ to select a folder from the folder list, and press OK to open.
Press the following buttons on remote control to activate corresponding function:
OK: conrm to start playing.
◄ / ► : adjust the volume.
Red button: play/pause.
Green button: stop the music.
Yellow button: to select music repeat mode(Repeat all, Repeating, Random, Repeat OFF)
Blue button: fast forward with 2x, 3x, 4x speed.
EXIT: press once to stop playing, press again to exit ”My Music”
3.My Movie
Press INFO button on the remote control to select the drivers.
GB - 10
2. TV Guide
Press ▲ / ▼ to select your desired channel. Press ◄ / ► to enter the guide timer of the se-
lected channel.
Press RED button on remote control to move the channel to “Advance Timer” (refer to the
“Advance Timer” item under “SETUP” menu).
RADIO
1. Radio list
Press ▲ / ▼ to select your desired channel, press ◄ / ► to select the icons with
following function: “Favorites”, “Lock”, “Edit”, “Invisible”,“Delete”,“Search”.
Press YELLOW button on remote control to save your setting.
When the LCN setup is “OFF”, the icons “Move” and “Sort” will appear for the selection.
2. Radio Guide
Press ▲ / ▼ to select your desired channel in the list, and then press ◄ / ► to enter
the guide timer of the select channel.
Press RED button on remote control to move the channel to “Advance Timer” (refer to
the “Advance Timer” item under “SETUP” menu).
MULTIMEDIA
This unit can supports MP3, MPEG4 and JPEG and video les recorded on USB ash
drive or SD/MMC/MS card. (USB device and SD/MMC/MS card not included)
Plug the USB ash drive into the USB port or insert the SD/MMC/SD card into the card
Slot.
GB - 11
Note:
* This unit might not support all the SD cards or USB.
* The unit might not support all the multimedia les stored in SD card or USB because it in-
cludes some special playback procedure which might not be compatible with the procedure of
this unit.
1. My Album
Press INFO button on the remote control to select the drivers.
Press ▲ / ▼ to select “Device” item, press ◄ / ► to choose “USB” or “Card Reader”.
Press OK to conrm your selection.
Press ▲ / ▼ to select your desired picture, press OK button to start playing.
Press ▲ / ▼ to select a folder from the folder list, and press OK to open.
Picture viewing mode,
press the following buttons on remote control to activate corresponding function:
INFO: to display the player tools.
▲ / ▼: select a previous or next picture.
◄ / ► : rotate the picture.
Red button: press to zoom in a picture, then press▲,▼, ◄ ,► to move from one area to
another area.
Green button: press to activate the background music. When the background music
is on, press ◄ / ► to adjust the volume. Press EXIT button to hide the music list.
GB - 14
2. SYSTEM
: Select different menu language.
CLOCK: Set the time before turn off automatically.
: Select the screen mode between 16:9 and 4:3.
: To rotate the display image.
BLUE BACK: To show the blue background when there is no signal received.
SPECIFICATIONS
DTV system:
Input frequency: UHF 474MHz 858MHz
Modulate: QPSK/16-QAM/64-QAM
Decode standard: MPEG-2: MP@ML
Audio decode standard: MPEG1: LAYER I/II/III, MPEG-2: LAYER I/II
General characteristic
Display: Colour TFT-LCD
Screen size: 9 inches
Resolution:800(H) X RGB X 480(V)
Speaker: 2 x 28mm
Power supply: DC 12V 20W
Connector: Input jack for external antenna; stereo earphones jack; audio/video (AV) input
&output jacks;
Supported power: Three options:
1. Alternative current power supply - AC adapter
2. Car adaptor 12V
3. Built-in battery (7.4V/2000mAh)
Dimension: 262 x 158 x 24(mm)
Weight: about 600 g
Working temperature: 0 C -40 C
Storage temperature: -20 C -60 C
GB - 13
Press ▲ / ▼ to select the movie, press OK to start playing the movie.
Press ▲ / ▼ to select a folder from the folder list, press OK to open.
Press the following keys on remote control to activate corresponding function:
INFO: to display the player tools.
▲ / ▼: Select a previous or next movie.
OK: conrm to start playing.
◄ / ► : adjust the volume.
Red button: play/pause.
Green button: slowly play the movie step by step.
Yellow button: fast backward with 2x, 4x, 8x, 16x, 32x speed.
Blue button: fast forward with 2x, 4x, 8x, 16x, 32x speed.
EXIT: press once to stop playing, press again to exit ”My Movie”.
When movie is playing, press AUDIO button on remote control to switch left or right mono
sound.
GAME
Choose “Gomoku” (the game of go), “Calendar”, “Calculator” by▲ / ▼ button, then
press OK to enter.
Press EXIT to return to previous menu.
AV MENU
Press “STANDBY/MODE” button to switch to AV mode, connect the unit to external source
device by AV cable, press MENU to enter the main menu.
Press ▲ / ▼ button to select the item(picture, SYSTEM), press ► to enter the sub-menu.
Then press ▲ / ▼ to select an option under sub-menu, and press ◄ / ► to set the value.
1. PICTURE
SAFETY INFORMATION
ATTENTION: To reduce the risk of electric shock, do not remove
the cover or back. There are no user serviceable parts inside the
unit. Refer all servicing to qualied personnel.
The lightning ash with arrowhead symbol within the triangle is a warning sign alert-
ing the user of "dangerous voltage" inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of impor-
tant instructions accompanying the product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE.
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive)
Cleaning
WARNING: Disconnect the unit from the mains supply before cleaning.
- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
- Using solvents, abrasive or alcohol-based products risks damaging the appliance.
- If an object or liquid enters inside the appliance, unplug it immediately and have it checked
by an authorized engineer.
GB - 8
3. Password
* Setup Menu Lock: When this item set “ON”, user need to enter password when re-enter
the Menu.
* Channel Lock: When this item set “ON”, user need to enter password to implement auto
scan or manual scan for the TV/Radio list.
* Censorship Lock: To set “No block”, “Total block” or different age group to be restricted
for the setup.
* Change the password: Key in the old password then enter the new one. (The default
password is 0000.)
GB - 9
4. Advance Timer
5. SW Update
Update the software via external memory devices.
6. Set Default
Press OK to initialize the setting and clear the program list, press EXIT to return to the previ-
ous menu.
TV
1. TV list
Press ▲ / ▼to select your desired channel, press ◄ / ► to select the icons with
corresponding function as following order: “Favorites”, “Lock”, “Edit”, “Invisible”, “Delete”,
“Search”.
Press yellow button on remote control to save your setting.
When the LCN setup is “OFF” (operate in “Installation”), the icons “Move” and “Sort” will
appear for the selection.
Users can set up appointed time to watch appointed Channels, start and nish time can be
set according to the timer system for this unit (TV or radio). please conrm the timer system
on this unit is correct before setup.
Picture auto-sliding mode,
press the following buttons on remote control to activate corresponding function:
INFO: to display the player tools.
▲ / ▼: select a previous or next picture.
Red button: play / pause.
Green button: activate the background music.
Yellow button: to select the sliding pictures once or keep repeating.
Blue button: press to set the scrolling speed of the pictures.
EXIT: to enter 12pcs picture preview mode.
BRIGHT: Adjust the brightness of picture
CONTRAST: Adjust the picture contrast
COLOUR: Adjust the picture color
RESET: to return the value of above items to 50.
PTM-3102 IB MUSE 001 REV0 - GB.i2 2 9/15/2011 3:32:40 PM
