
3. Switch on the dryer and adjust it to desired wind speed and temperature (air flow and
temperature adjustable). Then the dryer can be engaged for normal use and use the relevant nozzle
attachment as required.
Important Notice
1. This machine use AC power source, power must thus have a good grounding device
2. To maintain a smooth flow of air the air intakes cannot be put near any water, preventing sucking
in water which may damage the machine.
3. Clean the filter at the back regularly to ensure a smooth air flow.
4. If the motor does not work after plug into power and switching the machine ON, please turn off
heat switch immediately to avoid damage to heating element.
. Do not let minors and children be close to or to play with the machine!
Maintenance Instructions
1. The shell of the machine can be cleaned with a soft cloth and neutral detergent solution (to avoid
spoiling the paint work) then use a dry cloth to clean it;
2. Use water or strong fan to clean the filters regularly. Note that filters cannot be put back into the
machine until it is totally dry, as the water may damage the machine.
3. When the machine runs out of the internal carbon brush, Please take it to professional service
centre to replace with new Carbon Brush.
Product eatures and Parameters
See the label of the machine.
unctions & eatures
1. Soft Start:
Thanks to the protection from current buffers, when started, the dryers will not discharge any impulse
current, exerting no adverse influence upon the neighbouring working electrical equipment.