myappliances ART29201 Instruction Manual

GB IE
60cm Induction Hob
ART29201
USER HANDBOOK

[03] x 2
[02] x 2
[01] x 1
[04] x 1
TEMPLATE TEMPLATE

3
Induction Hob 04
Table à induction 33
Installation 27
FR
GB IE
ART29201

4
GB IE
Let's
get started...
Getting started... 05
Before you start 06
Safety 07
In more detail... 09
Product functions
Operation
Care and maintenance
Troubleshooting
Recycling and disposal
Technical and legal information
Guarantee
CE Declaration of conformity
10
12
17
19
20
21
24
26
Appendix
27
Installation

5
Getting
started...
GB IE
Before you start 06
Safety 07

6
Getting started...
GB IE
Tools required
Before you start
To avoid the risks that are always present when you use
an electrical appliance it is important that this appliance is
installed correctly and that you read the safety instructions
carefully to avoid misuse and hazards. Please keep this
instruction booklet for future reference and pass it on to any
future owners. After unpacking the appliance please check
that it is not damaged. If in doubt, do not use the appliance
but contact Customer Services on 0844 800 1128 (UK), 1
800 535542 (Ireland) and 01 56 48 02 60 (France).
Check the package and make sure you have all of the
parts listed.
Decide on the appropriate location for your product.
If this product contains glass please take care when tting
or handling to prevent personal injury or damage to the
product.
The specications plate is available on this appliance. This
plate displays all the necessary identication information for
ordering replacement parts.
If you sell the appliance, give it away, or leave it behind
when you move house, make sure you also pass on this
manual so that the new owner can become familiar with the
appliance and its safety warnings.
Before you start
SILICONE

7
Getting
started...
GB IE
Safety
These instructions are for your safety. Please read through
them thoroughly prior to installation and retain them for
future reference.
This appliance complies with all current European safety legislation,
however, the Manufacturer must emphasise that this compliance does
not prevent the surfaces of the appliance from heating up during use and
remaining hot during its operation.
Accessible parts may become hot during use. Young children should be kept
away. Care should be taken to avoid touching the appliance (e.g hob, cooker).
The Manufacturer highly recommends that this appliance be kept out of the
reach of babies and small children.
Children should be supervised to ensure that they do not play with the
appliance.
This appliance is not intended for use by persons (including children) with
reduced physical sensory, or mental capabilities, or by those who lack
experience and knowledge, unless they have been given supervision and
instruction concerning the use of the appliance by a person responsible for
their safety.
Means for isolating the appliance must be incorporated in the xed wiring
in accordance with the current wiring regulations. An all-pole disconnection
switch having a contact separation of at least 3 mm in all poles should be
connected in xed wiring.
Damaged power cables should be replaced by a competent person or
qualied electrician.
Make sure that the power cord is not caught under or in the appliance and
avoid damage to the power cable.
Do not allow the electric cables to touch the hot parts of the appliance.
Do not install the appliance outdoors in a damp place or in an area which
may be prone to water leaks such as under or near a sink unit. In the event
of a water leak allow the machine to dry naturally.
Please dispose of the packing material carefully.
Do not use ammable sprays in close vicinity to the appliance.
• All installation work must be carried out by a
competent person or qualied electrician.
• This appliance must be installed correctly by a
suitably qualied person, strictly following the
manufacturer’s instructions.

8
Getting started...
GB IE Safety
We also recommend that great care be taken during use and cleaning.
Read the cleaning and maintenance sections for this appliance carefully.
A steam cleaner is not to be used.
The appliance is not intended to be operated by means of external timer or
separated remote-control system.
The appliance is for domestic use only.
When a cooking zone has been on for a long time, the surface remains hot
for some time afterwards so do not touch the metal surface.
Do not store detergents or ammable materials beneath the hob.
Do not leave hot oils or fats unattended as they may catch light.
The Manufacturer declines all liability for personal or material damage as a
result of misuse or incorrect installation of this appliance.

9
In more detail...
In more
detail...
GB IE
Product functions 10
Operation 12
Care and maintenance 17
Troubleshooting 19
Recycling and disposal 20
Technical and legal information 21
Guarantee 24
CE Declaration of conformity 26

10
In
more
detail...
GB IE Operation
Product functions
> The induction hob caters for all kind of cooking, with its electromagnetic
cooking zones and its electronic touch controls and multi-functions,
making it the ideal choice for the modern family.
> The induction hob is extremely user-friendly, durable and safe.
Working principle
> The induction hob comprises a coil, a hotplate made of ferromagnetic
material and a control system. Electrical current generates a powerful
magnetic eld through the coil. This produces a large number of vortices
that, in turn, generate heat that is then transmitted through the cooking
zone to the pan.
Special functions
Protection from over-heating
A sensor monitors the temperature in the cooking zones. When the
temperature exceeds a safe level, the cooking zone is automatically
switched off.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents

11
In more detail...
GB IE
Detection of small or non-magnetic items
When an unsuitably sized or non-magnetic pan (e.g. aluminium) or some
other small item (e.g. knife, fork, key) has been left on the hob, the hob
switches automatically to standby one minute later.
Residual heat indicator
When the hob has been operating for some time, there will be some residual
heat. The letter “H” appears to warn you that it is too hot to touch the surface.
Auto shutdown
Another safety feature of the induction hob is auto shutdown. This occurs
whenever you forget to switch off a cooking zone.
The default shutdown times are shown in the table below:
Power level The heating zone shutdown automatically
after
1-3 8 hours
4-6 4 hours
7-9 2 hours
When the pan is removed from the cooking zone, it stops heating
immediately and switches itself off after the buzzer has sounded for
one minute.
Operation

12
In
more
detail...
GB IE Operation
Operation
Reference Description
Heating zone selection key
Power regulating key (reduce)
Power regulating key (increase)
Child lock
ON / OFF
Timer key
Preparation before use
> When the power is switched on, the buzzer will sound once and all the
indicators will switch on for one second and then switch off. The hob is
now in standby mode. Place the pan in the centre of the cooking zone.
Heating zone selection Key Timer key ON/OFF
Power regulating key Child lock

13
In more detail...
GB IE
Operation
Operating instructions
Caution
• When the ON/OFF key (E) is pressed, the induction hob
returns to standby mode if no other operation is carried out
within one minute.
• The four zones can take a maximum power of 3000 W.
Consequently, the hob automatically reduces the maximum
output power by allowing a maximum sum of total power
levels of 12.
Heating zone operation
When the ON/OFF key is pressed, all the indicators show "-".
1. Select the power level by pressing the "+" or "-" key for the
relevant hotplate.
2. The indicator initially displays "5".
3. Adjust up or down by pressing the "+" or "-" key.
4. If you press the "+" or "-" keys simultaneously, the power
setting returns to "0" and the entire cooking zone switches off.
5. See the table on Page 6 for the power specic to each cooking zone.
6. To adjust the power level select the zone rst.

14
In
more
detail...
GB IE
Timer function
1. Press the timer key and the indicator will start to ash.
2. Then set the time for between 1 and 99 minutes by pressing the "+"
and "-" keys.
3. Pressing the "+" key once increases the time by one minute;
pressing the "-" key once decreases the time by one minute.
4. When the set time exceeds 99 minutes, it will automatically return to "0"
minutes. If the "-" and "+" keys are pressed simultaneously,
the indicator will display "0".
5. Once the set time has elapsed the zone will automatically turn off.
Timer conrmation
1. Select the power level of the cooking zone and then press the "Timer"
key. The timer can now be set.
2. When the timing indicator has been ashing for 5 seconds, the set time
will be automatically conrmed.
3. After selecting a set time, conrm by pressing the "Timer" key.
Timer cancellation
After setting the time again, hold down the "Timer" key for 5 seconds.
This will cancel the timer and the indicator will revert to "0".
Operation

15
In more detail...
GB IE
Safety mode (Child lock)
To ensure the safety of children, the induction hob is tted with an interlock
device.
To lock:
1. Hold down the "Lock" ; the hob then switches to "Lock" mode.
2. The timer displays "LOW" and the rest of the keys are disabled except
the "ON/OFF" key.
3.
4.
Unlocking :
1. Hold down the "Lock" key for 2 seconds and the hob will return to
normal working mode.
The above may vary according to the size of the pan and the material from
which it is made.
Selection of heating appliances
Operation
Heating Zone Max. Power (W)
2000
2000
1500
1500
Caution
The base of the pan must contain magnetic material. It must
have a at bottom with a diameter of over 12 cm.

16
In
more
detail...
GB IE
Oil Frying Pan
Enamel coking utensil Iron plate
Stainless steel pot Iron pan
You may have a number of different cooking vessels
This induction hob can identify a variety of cooking vessels, which you
can test by one of the following methods:
1. Place the pan on the cooking zone. If the corresponding cooking
zone displays a power level, then the vessel is suitable. If "U"
ashes, then the pan is not suitable.
2. Hold a magnet to the base of the pan. If the magnet is attracted to
the pan, it is suitable for use with the induction hob.

17
In more detail...
GB IE
Care and maintenance
Care and maintenance
Damaged power cables should be replaced by a
competent person or qualied electrician.
For domestic use only.
Never place the induction hob directly into water.
Never place an empty pan on the hob as this will cause
an error message to appear on the control panel.
When a cooking zone has been on for a long time, the
surface remains hot for some time afterwards so do not
touch the ceramic surface.
Occasionally check that nothing is obstructing the air inlet
beneath the induction hob.
If the surface of the hob is cracked, disconnect from
power supply the appliance to avoid any possibility of
electric shocks.
Do not place rough or uneven vessels on the hob, as
they could damage the ceramic surface.
Avoid banging pots and pans down on the hob.
The ceramic surface is tough but not unbreakable.
OFF
Warning
Always switch off the electricity supply before
performing maintenance work. In the event of a fault,
contact an ofcial distributor or authorised dealer.

18
In
more
detail...
GB IE Care and maintenance
Do not leave metal objects, such as knives, forks, spoons
and lids on the hob as they may get hot.
Do not store detergents or ammable materials beneath
the hob.
Care and maintenance
Appliance cleanliness
Caution
• The glass surface is tough but not unbreakable.
• Avoid rubbing with any abrasive or with the base of the pans,
etc, as this will wear the markings on the top of the ceramic
hob over time.
> The appliance should be cleaned after use.
> The surface of the induction hob may be easily cleaned in the
following way:
Type of dirt Cleaning method Cleaning materials
Lime scale Apply white vinegar to the
surface, then wipe it dry
with soft cloth
Special ceramic cleaner
Burnt-on food Clean with damp cloth and
dry it with a soft cloth
Special ceramic cleaner
Light stains Clean with damp cloth and
dry it with a soft cloth
Cleaning sponge
melted plastics Use a scraper suitable for
ceramic glass to remove
residue
Special ceramic cleaner

19
In more detail...
GB IE
Care and maintenance
Troubleshooting
The following circumstances may not be a problem. Do not contact the
customer services until the problem has been conrmed.
If your appliance is still not functioning properly after making the checks
below, please contact the customer services.
Potential failure mode Potential cause Corrective action
F0/F1/F2 Fan failure Contact the customer
services
F3-F8 Temperature sensor failure Contact the customer
services
E1/E2 Abnormal voltage in power
supply
Check if power supply is
normal. Power on after power
supply returns to normal
E3/E4 Abnormal temperature Check the pan
E5/E6 Poor heat radiation in
cooking zone
Restart when cooking zone
cools down
The above table shows you how to assess and check common faults. Do not
take the appliance apart yourself, as you may damage the induction hob, and
will invalidate the guarantee.
Before calling the customer services, please do the following:
> Check that the appliance is correctly connected.
> Read the failure and display table above. If you are still unable to solve
the problem, switch off the appliance, do not try to take it apart or
uninstall it, and call customer services helpline.

20
In
more
detail...
GB IE Care and maintenance
Recycling and disposal
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or
retailer for recycling advice.
The symbol on the product or its packaging indicates that this product
cannot be treated as normal household waste. This product must be
handed over to an electric and electronic equipment collection point for
recycling.
On ensuring that this product is disposed of correctly, you will help to
avoid possible negative consequences for the environment and public
health, which could occur if this product is not handled correctly. To receive
more detailed information about recycling this product, contact your local
government, domestic waste disposal services or the outlet where the
product was bought.