mychway WL-VS17 User manual

1
2 Parts far Infrared Sauna Blanket Instrument
INSTRUCTION
Please read carefully before using,Thanks!

2
Contents
Theory&Function..................................................................3
Control Panel .........................................................................4
Operating Procedures............................................................4
Technology Parameter............................................................5
Packing list..............................................................................6
Important Safety Notice........................................................7

3
Theory&Function
Function:
1.To improve the blood circulation and enhance cells nourishments,make skin more
fresh and active.
2.To use the infrared rays shining the body,make the power under skin transport into
the heating power,the temperature of skins cells will increase,expend the blood
vessel,burning the free and extra fatness inside skins,final get the reducing fatless
and sliming body effect.
Caution of interrelated products:
1.The products that you use together with the machine should be with the high
quantity and safe function.
2.Don’t use the products with the element of alcohol,acid and alkali.
3.It’s necessary to use the moist and collagen products to protect the skin.
4.During the operation,the unit is working,don’t make upper part and down part of
covers overlap together,to avoid burning the leather of covers.
5.After the treatment,please use the sun block cream every day.It will be helpful if use
the essence gel,but please use the gel with anti-irritability and diminish inflammation
function.
Control Panel
1.Working Time Display
2.Temperature 1 Display
3.Temperature 2 Display

4
4.Temperature 1 Indicator
5.Temperature 2 Indicator
6.Start/Pause
7.Time&Temperature Adjust(Increase)
8.Time&Temperature Adjust(decrease)
9.Time&Temperature Setup Transition
Operation Procedures
1.Roll out the sauna blanket and connect two wires of it with the output of the
mainframe.
2.Let the client lie on the blanket and then start the operation.
3.Put through the electrical source and open the switch.
4.Press the button 7 and button 8 to set the working time of the machine.
5.Press SETUP button.when the nixietube2 glittering,please press the button 7 and
button 8 to set the output temperature of OUT 1.after setting the machine it can
conserve the numerical value automatically.
6.Press SETUP button again,when the nixietube3 glittering,please press the button 7
and button 8 to set the output temperature of OUT 2.After setting the machine it can
conserve the numerical value automatically.
7.Press SETUP button one more time.when the nixietube glittering,the machine will
return to the working time setup station.
8.After setting the working time and output temperature,please press’’S/P’’button to
start the machine,and then there will be a tittle glittering at the lower right corner of the
nixietube 1.
9.After the treating,shut off the machine and cut off the electrical source.
10.Cleaning the blanket and keep it on the dry place.

5
Cautions
1.When the machine is on the station of working,if it need to adjust the output
temperature,we can press the button ”setup” directly to choose and set and no need
to stop the machine to avoid effecting it.
2.When the temperature do not get to the setting number,the indicator light”4” and ”5”
keep lighting after start the machine.when it get to the setting number,the indicator
light is put out.
Technology Parameter
Voltage:AC110V 220V 230V 240V
Frequency: 50Hz 60Hz
Power:650W
Dimension:80*46*14CM
Any change is subjected to manufacturer without notice.
Attention
Please read the introduction carefully.When malfunction occurs,please contact with
the supplier.Do not open it by yourself to be protected.Keep out of water to avoid
damage or danger when cleaning the machine
Cautions
1.Press the start key before starting work,the caregiver should confirm that all the
output setting can meet the needs of the guests,caregiver can’t set too high at the
beginning of nursing,suggest adjust from the lowest output,slowly regulate.
2.When using,two layers of sauna blanket cant close to each other,stacked
together.After finishing the operation,please disconnect main power and take
off the accessories.In order to avoid adhibiting to each other for the overheating
between two layer of sauna blanket,it’s need to open the slide fastener to separate
two layer of blanket for cooling.After cooling,please cleaning,disinfection and

6
wiping the accessories,and put together at a dry and ventilated place.
3.Temperature above 65℃is dangerous,please use it carefully.
Packing list
Item Name Unit OTY Mark
Mainframe Set 1
Power wire Pc 1
Blanket Set 1 2parts
Fuse Pcs 2 Spare,10A
Instruction Pc 1
Attentions
1.The material object of the instrument shall previal.Please contact the distributor
directly in case of any special requirements.
2.Do not connect accessories not equipped with this instrument with the this
instrument in order not to cause any harm.

7
Important Safety Notice
1.Please don’t disassemble the equipment or try to do some other operation,which
have been indicted in our instruction.All the repairing work should be done by our
admitted professional personnel.
2.Please don’t assemble or operate this equipment while you are near the water or
your hands are wet.Notice that don’t pour the liquid on it.
3.Please pull out the plug from the socket when you met such conditions a below.And
keep in touch with professional maintenance Station.
a.The equipment poured by liquid
b.The equipment has abnormal smell.fuming or loud and strong noise
c.Cable is destroyed.
d.The equipment is fallen down and broken
4.Please don’t put anything on the cables,don’t place the equipment at any place
where someone can step on the caple.
5.Please pull out the power cable after using it for your safety.
6.Don’t put anything into the equipment’s jack,otherwise it may cause fire or get a
shock.If something enters the equipment,please don’t pick it out by yourself,contact
with distributor or our company immediately.
7.Please don’t put the equipment on anything which can’t stand steadily,so that the
equipment can avoid being turned over or damaged.
8.Our company has the right to modify this introduction before notify!And keep the
explanations right for the above.