Nüby Sleep By Me User manual

Instruction Manual
Age: 0-6m
(weight of child
maximum 9kg)
Sleep By Me
Bedside Crib
MAINTENANCE ADVICE
PRODUCT WARRANTY
The crib and the mattress have a resistant fabric cover which is completely removable and washable.
The removal/assembly operation should be carried out by adults only. On a regular basis check the
condition of the product and presence of any possible damage. In the case of damage do not use it and
keep it out of the reach of children. For washing of the fabric, carefully comply with the washing
instructions indicated on the label.
For cleaning, do not use solvents, abrasive or agressive products. Hand wash in cold water. Do not bleach.
Do not tumble dry. Do not iron. Do not dry clean. After each wash check the condition of the fabric and of
the stitching for any signs of damage.
WARNING – During the removal / or application of the lining, handle the fabric carefully in order to avoid
accidental damage or tears.
WARNING – The removal and/or application operations may take a few minutes and should be carried
out by an adult.
Nûby’s ‘Sleep By Me’ Bedside Crib includes a one-year limited warranty against defects from the
date of purchase. In the event of a malfunction or defect during the in-warranty period, Luv n’ care®,
Ltd. at its option, will replace or repair the product under warranty. Upon receipt of the product and
the proof of purchase with a valid date of purchase, the defective part will be immediately repaired
or replaced and returned to you free of charge. Please send defective unit, proof of purchase with
valid date of purchase, and a description of the problem you have encountered to:
Nûby UK LLP
13 Burford Way
Boldon Business Park
Boldon Colliery
Newcastle upon Tyne, NE35 9PZ
Attn: Nûby Customer Care
Note: This warranty does not cover a defect that has been caused by negligence, accident or
improper use of the product.
Questions:
Call 0800 334 5844 (UK only) or visit www.nuby-uk.com
[email protected]
Nûby UK LLP
13 Burford Way
Boldon Business Park
Boldon Colliery
Newcastle upon Tyne, NE35 9PZ
Freephone number: 0800 334 5844
[email protected]
www.nuby-uk.com
www.nuby.com
Form PIC/UK: 99819
© 2020 Luv n’care®, Ltd.
Nûby™ is a trademark licensed to
Luv n’ care®, Ltd.
PRODUCT DESIGN, TM & ©
Complies with EN1130: 2019
Designed by Luv n’ care® in the U.S.A.
Made in China

3
2
WARNING – Do not use this product without reading the instruction for use first;
WARNING – Placing additional items in the product may cause suffocation;
WARNING – Do not place the product close to another product, which could
present a danger of suffocation or strangulation, e.g. strings,
blind/curtain cords, etc.;
WARNING – Do not use more than one mattress in the product;
WARNING – Stop using the product as soon as the child can sit, kneel or pull
itself up;
WARNING – Be aware of the risk of burning cigarettes, open fires and other
sources of strong heat, such as electric bar fires, gas fires, etc. in the
near vicinity of the Bedside Crib.
WARNING!
• NEVER leave the child unattended in the Bedside Crib when in “Co-sleep
mode (fixed to the bed)”.
• DO NOT use crib if any parts are missing, damaged, or broken. Contact Nuby
UK ([email protected]) for replacement parts and instructional literature
if needed. DO NOT substitute parts.
• NEVER use accessories that have not been approved by the manufacturer.
• Only an adult should assemble, fold and unfold the Bedside Crib.
• Before assembly, check that the product and all of its components have not
been damaged during transportation. Should any part be damaged do not use
and keep out of reach of children. Make sure that users of this product are
knowledgeable on its proper operation.
• The Bedside Crib should be locked in the fixed position when a child is
unsupervised in it when in “Stand-alone cot mode”.
• Before use in “Co-sleep mode (fixed to the bed)”, make sure the product is
properly anchored and positioned.
• When the product is used in “Co-sleep mode (fixed to the bed)”, before laying
the child in it, make sure that the connection belts are hooked and tensioned
properly. The product must be secured to the parents’ mattress and no gaps
between the product and the adults’ mattress must be present.
• Keep the fastening belts out of the reach of children.
• Do not use the product without the frame.
• The thickness of the mattress must be such that vertical height (upper surface
of the mattress to the upper edge of the product’s sides) is at least 200mm.
Do not use more than one mattress in the Bedside Crib.
• If you purchase a mattress separately, make sure it is suitable for the product.
• Do not leave any object inside the product that could reduce its depth.
• The Bedside Crib should be placed on a horizontal floor.
• Children should not be allowed to play unsupervised in the vicinity of the
Bedside Crib.
• The Bedside Crib comes with a mattress - if you need to replace the mattress,
ensure it is no deeper than 100mm.
• All assembly fittings should always be tightened properly and care should be
taken that no screws are loose, because a child could trap parts of the body or
clothing (e.g. strings, necklaces, ribbons for babies’ dummies, etc.), which
would pose a risk of strangulation.
•Do not position the crib near walls and obstacles to prevent trapping hazards.
•Do not adjust the product with the child inside.
•Do not move the product with the child inside.
•Do not use the product with more than one child at a time.
COMPONENTS
A. Central Supporting Structure
B. Rocking Support Frame
C. Fixing Belts
D. Connecter Knuckle
E. Fabric Lining
F. Mattress with Removable Cover
G.
Outer Travel Bag
H. Support Bar for Middle
I. Support Bar for Bottom
J. Storage Basket
GH I J
DEF
A B C

4 5
B1
E1
C1
C2
E1. Velcro for Fixing Crib
E2. Zip for Fabric Removal
E3. Zip for Co-sleeping Mode
E4. Mesh Window
E5. Side Support for Restraint
A1. Height Adjuster Button & Second Lock
A2. Middle Support Frame Release Button
A3. Adjustable Feet with Wheels & Brakes
A4. Wheels
A5. Front Leg Adjustable Button
A6. Front Bar Release Button
A7. Snap & Hook Fixing Storage Basket
A8. Rocking Function Button
B1. Fixing Pins
C1. Fixing Male Buckles
C2. Belt Length Adjust Buckles
A7
A6 A8
A2
A3
A4
A5
A1
ASSEMBLING THE BASSINET
1. Take product from carton box, hold the Central Supporting Structure (A) , turn the
leg outward until you hear the locking click on the top hinges. Repeat the same
operation with the other leg, after which the product will resemble as shown in 1.1.
2. Hold Connecter Knuckles (D), push it to Rocking tubes on both sides.
1.1
3. Hold Middle Support Bar (H),
push it in and ensure fixing pins.
4. Hold Bottom Support Bar (I),
push it in and ensure fixing pins.
1
2
3 4
E2
E3
E3
E4
E5

2
2.2
6 7
HEIGHT ADJUSTMENT OF THE COT
1. The crib can be adjusted to different height positions. In order to adjust the height,
press Height Adjuster Buttons (A1) on both sides of the cot to the desired position.
1
5. Hold Rocking Support Frame (B), push it and ensure Fixing Pins (B1) are locked
inside Middle Support Frame Release Button (A2). After this operation, the
product will resemble the above.
5
8. Place the mattress on the bottom of
the bassinet.
8
9. Locate the storage basket to Crib.
9
6. Fix the Fabric Lining (E) to the Central Supporting Structure (A), hooking the 2
belts at the bottom of the lining (E1).
6
2. The base of the crib can be inclined slightly by adjusting the two legs to
different heights.
7. Fix the top rail of both sides and then zip up the front panel.
7
WARNING – The crib can be inclined with a maximum variance of 2 positions
between one leg and the other (for example: the right leg In position 3 and
the left leg in position 1).
WARNING – The head of the child should always be positioned on the highest
side, as shown above in 2.2.

8 9
CO-SLEEP MODE (FIXING TO THE BED)
The crib can be fixed to the parent’s bed (co-sleeping mode).
WARNING - IMPORTANT FOR THE SAFETY OF YOUR CHILD:
This method is only possible with bed types that comply with all of the conditions
described in this paragraph. In particular the side support of the crib should
always be put close to the parent’s mattress and the mattress should always be
aligned with the height of the side support for restraint of the crib. Furthermore,
the crib should be firmly fixed to the structure of the parents bed or to the
mattress support (net or slats).
WARNING – To avoid hazards from the child’s neck being caught on the top rail
on the side that is next to the adult bed, the top rail must not be higher than the
adult bed mattress.
WARNING – To avoid the risk of your child being strangled, the attachment system
to the adult’s bed shall always be kept away from and out of the crib.
WARNING – Check to make sure that the crib in the co-sleeping mode does not
interfere with the parent’s bed.
• DO NOT use Bedside Crib if any parts are missing, damaged, or broken. Only
use attachment system provided, contact Nuby UK ([email protected]) for
replacement parts & instructional literature if needed. DO NOT substitute parts.
•Bedside Cribs should never be used in an inclined position when in co-sleep
mode;
• DANGER! – Always completely raise the drop side when not attached to the
adult’s bed.
Open the side of the crib with the window using the side zips , then push the
release button (A6) and release the tube end from the plastic housing in front bar,
repeat on both sides, then open them completely.
Move the crib close to the parent’s bed and check the height of the crib
compared with the bed’s mattress. The open side of the crib should always be
lower to ensure containment of the crib.
WARNING – in the co-sleeping mode the 2 legs of the crib should always be
adjusted to the same height.
In order to fix the crib to the parent’s bed (co-sleeping mode) use the pair of fixing
belts (C ) provided. Take the end of the belt which has both the male and female
connector (as per below image). Locate the female connecter stitched to the side of
the Crib. Attached the male connecter into it. Take the belt and wrap securely around
the structure of the parents’ bed. This could be around the mattress or the bed frame
depending on the style of bed. Once
complete attach the male connector into the
remaining female connecter. During fixing we
recommend that the crib is kept a short
distance from the parents’ bed. Repeat this
operation with the second belt on the other
side of the crib.
At this point, move the crib to the side of the
parent’s bed and tighten the loop (C1) by
pulling the belts firmly, ensuring you carry out
this operation for both belts. Adjust the belts
until the crib is firmly in the contact with the
parent’s mattress.
FEMALE
FEMALE
MALE
STAND-ALONE COT MODE
This product can be used as a stand-alone cot but the co-sleeper mesh side panel
MUST be zipped up in the closed position.
• The Bedside Crib should be locked in the fixed position when a child is
unsupervised in it when in “Stand-alone cot mode”.

10 11
MAKING THE BED
It is possible to unfasten the crib from the parent’s bed in order to make the bed
easily. Just unfasten the buckles on the crib located below the fabric finish.
To re-secure the crib to the parent’s bed, pull once again the belts to make sure
the crib is properly and firmly secured to the parent’s bed. Pay attention to follow
all the steps previously mentioned in paragraph ”Co-sleeping Mode (fixing to the
bed)”.
ROCKER FUNCTION
Push the rocking function
buttons on both sides, the
bassinet can now swing by
hand.
WARNING!
•Suitable beds for co-sleep mode - the height of the adult bed (incl. mattress)
from the floor should be a minimum of 52cm.
• The adult bed mattress must be flush to its frame i.e. the bed frame cannot
extend beyond the mattress as this would result in a gap between the adult
mattress and the Bedside Crib.
•Check the tightness of the attachment system before each use by pulling the
Bedside Crib in a direction away from the adult bed.
•Ensure there are no space between the parents mattress and the side of the
Bedside Crib. If there is, pull the belts firmly to tighten until there is no space.
• Always ensure the fixing belts are straight.
•To prevent a suffocation hazard from entrapment, the Bedside Crib shall be
properly secured to the adult bed using the attachment system.
•There shall never be a gap between the lower side of the Bedside Crib and
the mattress of the adult bed.
•If there is any gap between the Bedside Crib and the adult bed DO NOT
use product.
• Gaps should not be filled with pillows, blankets or other items.
•During use, make sure that the parents bed sheets, blankets etc, do not enter
and cover the interior of the Bedside Crib.
•When the product is used in the “Co-sleeping Mode (fixing to the bed)”, it
should always be fitted to the long side of access to the bed. Do not fix the
product to the head or bottom of the bed.
•Use of the product is only permitted with beds and / or mattress with straight
sides. Use of the product with a round bed or
mattress or water bed is not permitted.
Check the Adjustable Feet with Wheels and
Brakes (A3). Ensure they are firmly in contact
with the parent’s bed.
If during the fixing operations of the Bedside
Crib to the parent’s bed, it is not possible to
slide the feet of the crib under the parent’s bed,
it is still possible to fix the crib by pressing the
front leg adjustment button (A5) and folding the
legs so the crib can be pushed up flush to the
parent’s bed.
LINING REMOVAL AND CLEANING
1. Remove the mattress and release the velcro on the underside part of the
fabric structure (E1).
1
2. Open zips on both sides of the window opening (E3). Open the zipper that
runs around the top tube frame (E2). Ease the fabric from the tube then gently
pull towards the lowered window, paying attention not to damage the internal
part of the lining.
2