Nac BlueNAC-3000 User manual

BlueNAC-3000
®
–User Manual– English
1
BlueNAC-3000 RADIOLINK PORTABLE
BlueNAC-3000RL
The device BlueNAC-3000 RadioLink (from now abbreviated BN-3000RL) it is a device
based on Bluetooth®technology that allows wireless use of one radio (walkie-talkie or
transceiver) in combination with two headsets or motorbike Intercoms BlueNAC-3000®.
With this device you’ll have a complete wireless intercom system, connectable to almost all
market radios.
In addition it is possible to connect a GPS or audible warning devices with the auxiliary
audio connection, expanding its possibilities still more.
Thanks a lot for your confidence in our company and we hoped that enjoy long time the
benefits that this product offers.

BlueNAC-3000
®
–User Manual– English
2
INDEX
MAIN FEATURES OF BLUENAC-3000RL....................................................................................................3
USE OF DEVICE...............................................................................................................................................3
Description and use front panel buttons......................................................................................................3
NORMAL Operation Mode ...........................................................................................................................3
SETUP MENU Mode......................................................................................................................................3
LEDs Indications............................................................................................................................................3
OPERATION MODE .........................................................................................................................................4
MENU MODE.....................................................................................................................................................4
PAIRING WITH BlueNAC-3000 HEADSETS................................................................................................5
RADIO CONNECTION .....................................................................................................................................5
Gain Settings to radio microphone (TX) .......................................................................................................5
Volume adjustments in radio reception (RX) ...............................................................................................6
SOFTWARE UPDATING AND USB SETTINGS..........................................................................................6
GUARANTEE.....................................................................................................................................................6
SAFETY TIPS.....................................................................................................................................................6
TECHNICAL SPECIFICATIONS BlueNAC-3000RL....................................................................................7
Copyright y and Trademark..............................................................................................................................7
Disclaimer and Limitation of Liability...............................................................................................................7
APPENDIX ....................................................................DECLARATION OF CONFORMITY
...........................................................................................MACHINING TEMPLATE PANEL

BlueNAC-3000
®
–User Manual– English
3
2
3 4 *
1
MAIN FEATURES OF BLUENAC-3000RL
•Bluetooth®version 2.1
•Enable wireless communication between two headsets BlueNAC-3000 and a walkie-talkie or transceiver.
•It’s possible connect audio sources like audible warning device or GPS with optional aux audio connection.
•Transmission Control Priorities PILOTO-COPILOTO
•Voice messages to the headsets to make easy the control and operate the MENU.
•Power supply requirement from 12V to 24V.
•Portable version: include lithium ion battery with a range of up to 8 hours talking time and 150 hours in
standby mode.
•Software upgradeable via USB port.
USE OF DEVICE
Description and use front panel buttons
There are two types of pulsation for the keys operation: normal short press or long press (≈ 3 seconds)
NORMAL Operation Mode
In normal operation mode, the buttons between the two Leds, (+ and -) are used to vary the way in which Pilot
and Copilot used the transmission (see TRANSMISSION MODES).
1. Key : Short press, PILOT Private Transmission mode.
2. Key : Short press, PILOT Priority Transmission mode.
Long press, Free Transmission mode.
3. USB connection to PC and battery charge.
4. Key On/Off : Long press (≈ 3 seg), ON/OFF.
Long press (≈ 8 seg), Pairing Mode.
* This key is not used in BN-3000RL portable.
SETUP MENU Mode
By pressing simultaneously the & for 3 seconds, you access the Settings menu. If the headsets are
linked and audio connection established, then listen on headphones the first menu
option with a synthesized voice saying "SOUNDS VOLUME”.
Pressing the On/Off Key (4) advances to the next menu item. Use the key or to increase or decrease
the level in each option.
0 Click: Volume of synthesized sounds and phrases. Hear “SOUNDS VOLUMEN” in the headsets.
1 Click: Volume of the auxiliary input (music or GPS). Hear “AUXILIARY VOLUMEN”
2 Click: Volume of the radio. Hear “RADIO VOLUMEN”
3 Click: Gain the radio microphone. Hear “RADIO MICROPHONE GAIN”
After 5 seconds without any action, automatically exits of MENU mode.

BlueNAC-3000
®
–User Manual– English
4
LEDs Indications
At power on, the LEDs indicate the configuration of the first 5 seconds. After this time show the current status
of the link (and the battery in the portable version).
TABLA A
During power on
Blue Led
Blink
Pilot priority transmission mode
Red Led
Blink
Private transmission mode (Copilot excluded)
Blue Led &Red Led
Blink alternately
Free transmission mode
After 5 seconds shows the status of the device
Blue Led
Fixed
Every second Flash
Double Flash per second
Does not bind any device
Linked with a device
Established voice connection
Red Led
Flicker
Fixed
Low battery
Dead battery
Blue Led &Red Led
Flash simultaneously
Flash alternately
Menu Mode
Pairing Mode / Sync
NOTE: If you only use a headset or motorbike-intercom BlueNAC-3000 in combination with BN-
3000RL, and for some reason it is setup as Co-pilot, you should bear in mind that radio transmission
may not operate properly, unless you configure the BN-3000RL to free transmission mode.
MENU MODE
ON/OFF
VOLUME UP
VOLUME DWN
Observations
Select the menu
item according
to the number
of keystrokes
By pressing UP & DWN simultaneously
for 3 seconds, to enter in MENU mode
Both LEDs flash
simultaneously.
After 5 seconds without
pressing any keys, it returns to
normal operation
0 click
(Just to enter in
MENU mode)
Sounds Volume
Increase Sounds Volume Decrease Sounds Volume
1 clicks Radio Volume
Increase Radio Volume
Decrease Radio Volume
OPERATION MODE
ON/OFF
VOLUME UP
VOLUME DWN
Observations
Long
press
Switch on
Long
press
Switch Off
By clicking one time
PILOT Priority transmission
You heard through the
headphones
"Priority Transmission"
Long press activates
free transmission mode
You heard through the
headphones
"Free Transmission"
By clicking one time
Private Transmission Mode
(Exclude the co-pilot of
transmission)
You heard through the
headphones
" Private Transmission "
During power on the
LEDs show the
selected transmission
mode according to
Table A

BlueNAC-3000
®
–User Manual– English
5
2 clicks Increase radio
microphone gain Decrease radio
microphone gain Radio microphone gain
3 clicks Volume Increase
Auxiliary Input Volume Decrease
Auxiliary Input Auxiliary Input Volume
PAIRING WITH BlueNAC-3000 HEADSETS
To pairing one or two headsets with BN-3000RL, follow these steps:
•Make sure the headsets are set to Pilot and Co-pilot respectively.
•Turn off all devices to match, both headsets BlueNAC-3000 and BN-3000RL device.
•Turn on the headsets BlueNAC-3000 holding the power on key for at least 8 seconds, until Leds
blinks alternately.
•Immediately follow the same procedure on BN-3000RL device by pressing power on 8 seconds.
After a maximum time of 2 minutes, all devices are matched and will be restarted normally. This procedure
does not need do anymore. If for some reason are not synchronized correctly the first time, repeat the
procedure again.
RADIO CONNECTION
Gain Settings to radio microphone (TX)
Note that each radio or transceiver requires a specific signal on the microphone to transmit properly. There is
no pattern or a particular standard in the market, so you have to make some initial adjustments in the settings
menu of the BN-3000RL depending on the model of your radio and the type of microphone you use.
The most common are:
•The standard FM radios or PMR/LPD usually use a high impedance microphone called "electret".
These microphones deliver a great sign for what the menu setting on the "Radio Microphone Gain"
should be rather the minimum of the scale.
•Air Band AM radios typically use a low impedance dynamic microphone, so the menu setting on the
"Radio Microphone Gain" should be between half and full scale.
The ideal setting can be performed using two radios, one to confirm the receipt and one connected to the BN-
3000RL, performing the following steps:
•Turn on both radios and turn the volume pot halfway.
•Check the radio volume level to be connected to BN-3000RL, saying the numbers from “1” to “5” while
transmit, listening the volume level received in other radio.
•Connect the radio to the BN-3000RL and take a BlueNAC-3000 headset but do not put on your head
to avoid isolate the environment.
•Active the transmission by pressing the PTT key on the headset and speak in front of the microphone,
counting again from “1” to “5”.
•If the volume you heard on the other radio is similar to the initial test, this adjust is finished and you
must proceed to the reception volume level adjustment, explained below.
BN-3000RL uses a professional 9 pins connector which allows connection to the vast majority of
radios from leading brands, such as ICOM, Alan/Midland, Motorola, Yaesu/Vertex, Kenwood,
Cobra, Alinco, ADI, etc., for which we have the corresponding connecting cables. With this
portable version you only have to change the cable for different radios.

BlueNAC-3000
®
–User Manual– English
6
•If, however the volume is too low or too high, you must access to SETUP MENU and make the
appropriate changes. When you obtain the ideal setting, turn off the BN-3000RL so that the values are
recorded in its memory.
Note: with a very low gain, those who receive your communication, probably will not understand you well
because the signal is too poor, while if the gain is too high, your voice will be distorted.
Volume adjustments in radio reception (RX)
To listen to the radio at a volume similar to the intercom, you should perform the following procedure:
•Turn on the radio and turn the volume pot between one third and a half.
•Transmit from other radio and check the volume in the headset BlueNAC-3000.
•If the volume is too high or low, go into the SETUP MENU of the BN-3000RL and change the level in
"RADIO VOLUME" option.
•When you get the right level aproximately, you can make a fine adjust by means the volume of the
radio.
SOFTWARE UPDATING AND USB SETTINGS
You can download the update software and firmware files for free. To connect the device to the computer you
require a standard mini-USB cable, a free USB port and internet connection. You can found the software,
updates and instructions on our website:http://www.bluenac3000.es
GUARANTEE
1. The duration the guarantee is 24 months from the date of acquisition.
2. To make use of the guarantee is essential send us a photocopy of the purchase invoice referring to
damaged equipment.
3. The guarantee repairs should be made in NAC-INTERCOM.
4. The guarantee covers the entire device except batteries or external peripherals to the product.
5. The damage that the device could suffer during transportation and the costs thereof are excluded from
the guarantee.
6. Not be claimed damages or compensation for the downtime, its costs, or direct or consequential
damages that might cause such inactivity.
7. The guarantee is void if there is one of the following circumstances: installation and/or faulty
connections, use in adverse conditions, damage caused by bad use or handling, damage or faults in
batteries.
8. The performance of statutory guarantee, against the seller, are in addition to this guarantee and are
not restricted by it.
SAFETY TIPS
•Keep away from moisture and dust.
•Clean with soapy water, never with abrasives or solvents.
•Do not store in areas over 50ºC or directly under the heat source. It can cause a drop in performance and
reduce battery life.
•Do not let it fall from considerable heights.
•Do not manipulate the controls or plug connections with wet hands and remember to avoid contact with
splashes of water or aggressive liquids.
•Avoid that is near magnetic fields.
•Do not manipulate/modify the product.
•Keep away from microwave or wireless networks. May cause interference.
•Do not expose the headset to considerable fluctuations in temperature.
•Do not subject it to shocks and excessive vibrations.

BlueNAC-3000
®
–User Manual– English
7
TECHNICAL SPECIFICATIONS BlueNAC-3000RL
Bluetooth®Version
2.1
Radiofrequency
2,41Ghz-2,48Ghz
Profiles
Special RadioLink
Chip Manufacturer and Model
CSR BC03MM
Output Power
Class II (4 mW max.)
Radio range
<15m
Power supply
12V to 24V (Panel version)
Measures (Length x height x width)
670x500x210 mm. (Panel version)
Weight
40g
Storage Temperature
-20ºC->+45ºC (max. 85% relative humidity)
Operating Temperature
+3ºC->+35ºC (max. 85% relative humidity)
Battery Type/Capacity
Li-Ion/500mAh
Battery charge time
2-3h
Talk time
8h
Battery time at rest “Standby”
150h
USB CHARGER
GEB-05EU-0550
Input Voltage
180-250V~
Frequency
50/60 Hz
Rated Current
0,15 A
Voltage
5 V
Current Output
500 mA
Copyright y and Trademark
© 2009 NAC-Intercom. All rights reserved.
NAC-Intercom®and BlueNAC-3000® are among the registered trademarks owned by or licensed to use NAC-Intercom.
All other product names and marks are or may be trademarks of their respective owners, and are used to identify products
or services from them.
NAC-Intercom uses the trademark of Bluetooth®wireless technology license from Bluetooth SIG, Inc.
Disclaimer and Limitation of Liability
NAC-Intercom assumes no liability for damages or loss resulting from the use of this manual.
NAC-Intercom assumes no liability for loss or claims by third parties which may result from use of this software.
NAC-Intercom assumes no liability for damages or losses caused by deletion of data as a result of a malfunction, battery
or dead battery, or repairs. Be sure to back up all important data on other media to avoid data loss.
All items display this symbol in the body of the product, in packaging or in the user
manual, should not be discarded with normal household waste, but must be
deposited in specialized collection centers. In these sites, materials are selected
based on their characteristics and will be recycled, contributing significantly to the
protection and conservation of the environment.