Nanit Pro User manual

Floor Stand User Guide
Guide de l’utilisateur du support de plancher
Manual de usuario para el soporte de piso

3
• What’s In The Box .............................................................. 4
• Safety ......................................................................... 5
• Let’s Get Started ............................................................... 6
• Installation Options ............................................................7
• Assembly ..................................................................... 8
• Compliance .................................................................. 18
Table of Contents
Watch an install video before trying it yourself: nanit.com/install
Limited Warranty: nanit.com/legal/warranty
Français à partir de la page 19
Español a partir de la página 35

4
What’s In The Box
Nanit Pro Camera 4 Floor Stand Tubes, "Y" Joint
and 4 Cord Management Channels
3 Floor Stand Legs
U-Bracket and 2 Drywall Screws
Free Standing Attachment Joint
Power Adapter

5
Safety
• WARNING: Strangulation Hazard—Children have
STRANGLED in cords. NEVER attempt to use cord without the
protective covering. Check protective covering before each use
to ensure that the cord is not exposed to your child. Immediately
discontinue use if protective covering is damaged or broken.
• This device is designed to be used behind or next to a standard
crib, in the middle of the long side of the crib.
• Adult assembly is required. Keep small parts away from children
when assembling.
• This product cannot replace adult supervision. Ensure your child’s
health by checking on him/her regularly.
• This device is designed for indoor use only.
• This product and its packaging are not toys. Do not allow children
to play with them.
• Use only the AC power supply included with your Nanit.
• Never plug Nanit in to an outlet which is within reach of your child.

6
Let’s Get Started
Download the Nanit app and set up your account.
Follow the in-app instructions to set up your Nanit Camera.
You can choose to follow the assembly instructions in-app or in this booklet.
nanit.com/app

7
Installation Options
A
You can install your floor stand against the wall, behind the crib (A). If your crib is not against
the wall, you can install the third leg to place the Nanit in a more suitable position (B).
B

8
Assembly – Wall Leaning or Free Standing
Assemble stand, top to bottom. Follow the steps starting on the next page.
1.
START END

9
Push together the first segment (A). Then screw remaining tubes together, followed
by the“Y” joint (B). Screw both legs to “Y” joint (C). If using the free stand, follow the
steps on the next page.
A B C
Assembly – Wall Leaning or Free Standing 2.

10
ED
If adding the third leg, screw the leg to the attachment joint (D). Then slide and snap
attachment joint into the back of the stand (E).
3.
Assembly – Free Standing Only

11
4.
Assembly – Wall Leaning or Free Standing
Free
Standing
Put the Nanit stand where it will live.
Choose a location where the power
outlet is out of your child’s reach.

12
Free Standing Free Standing
Decide cord management direction depending on where your power outlet is located (A).
Pull cord to reduce slack and push upwards while tightening (B).
Assembly – Wall Leaning or Free Standing 5.
A B

13
Connect the cord management channels.
Assembly - Wall Leaning or Free Standing 6.
2
3
1
Free Standing

14
Place the Nanit at the planned center of the crib (A). If using the Wall Leaning option,
use U-Bracket to secure the stand 32” from the floor, via adhesive or drywall screws (B).
7.
32”
A B
Assembly - Wall Leaning or Free Standing

15
Assembly - Wall Leaning or Free Standing
Plug the power cord into the power adapter, and then plug the adapter to the outlet (A).
Attach the camera (B). Make sure that the power outlet you use is not within your child’s reach.
A B
8.

16
Pair camera using your Nanit app.
nanit.com/app
9.
Assembly - Wall Leaning or Free Standing

17
Push the crib next to the floor stand, and adjust the camera to see the entire crib.
Assembly - Wall Leaning or Free Standing 10.

18
DECLARATION OF CONFORMITY
Hereby, UdiSense, Inc. (DBA: Nanit), 244 Fifth Avenue, Suite 2702, New York, NY 10001, declares that the radio equipment Model N301 is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity, including device frequency bands and maximum radio-frequency power, is available at the following
internet address:
https://www.nanit.com/legal/compliance
Compliance
POWER SUPPLY INFORMATION
Input Voltage Input AC frequency Output Voltage Output Current Output Power Average active
eciency
Eciency at
10% load
No load power
consumption
100-240V 50-60Hz 5V 2.1A 10.5W 83.65% 80.60% 0.0033W
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and
recycling of this product, contact your local municipality, disposal service or the shop where you bought this product.
PRODUCT USE WARNING
This product is meant for indoor use only.
RADIO FREQUENCY (RF) EXPOSURE STATEMENT
This equipment should be installed and operated with a minimum distance of 20 cm between the camera and the human body.
For full compliance information visit: nanit.com/legal/compliance

19
• Qu’est-ce qui se trouve dans la boîte ............................................20
• Sécurité ...................................................................... 21
• Commençons .................................................................22
• Options d’installation .........................................................23
• Assemblage ..................................................................24
• Conformité ..................................................................34
Table des matières
Regardez une vidéo d’installation avant de l’essayer vous-même : nanit.com/install
Garantie limitée : nanit.com/legal/warranty

20
Qu’est-ce qui se trouve dans la boîte
Caméra Nanit Pro 4 tubes de support de plancher, joint « Y »
et 4 canaux de gestion des cordons
3 pattes pour le
support de plancher
Pince en U et 2 vis pour cloison sèche
Charnière de xation
autoportante
Adaptateur d’alimentation